PDA

View Full Version : Can you help me with my t maxx!?!?


willmac
02-07-2003, 08:42 PM
Thanks for all your help. Let me give you some more details. The slipper clutch is fine. I have replaced that once. It seems tight and there is no sign of it slipping. I re-set the tension just to be sure. The spur gear is meshed up good and snug and there are no teeth missing. No evidence that the gears themselves are slipping. The car will run and move - but it's sluggish - a lot of rpm relative to the speed. The engine is running like a top. Seems like a clutch (besides the slipper clutch) slipping. Are there 2 clutches - one on the engine drive shaft and another in the transmission? Also, I noticed that it isn't shifting into 2nd gear ever, no matter what the rpm's are. What would you suggest I check next? Thanks again for your input.

witakr
02-07-2003, 09:56 PM
Have you checked to make sure you difs are tight? I had this problem with my Ofna Ultra LX Pro RTR and when I went to investigate I found the frond and rear difs to be really loose.. I desided to go ahead and rip them out and rebuild them and it ran great.. If I were you I'd check my difs and tranny