PDA

View Full Version : TMAXX 2.5 won't stay running Help!


Sledneck01
03-11-2003, 11:30 AM
OK My girlfreinds little brother has a TMAXX 2.5 and the first tank was pretty then his dad was messing with the needles which he shouldn't have been. But now the damn thing will get started and then when you go to hit the throttle alittle bit it dies. then it is hard to get started again. Well I thought well I will put the needles back to factory where they should be at. so i did 3.75 out on high speed and low speed is flush with the houseing. Do you guys know any other things we should try.

JoeMAXX
03-11-2003, 06:48 PM
I have had problems with the new easy start system. What I do now is remove the blue wire and use a glow plug heater. I also had the stalling problem and I richened the LSN about 1/4 turn counter clockwise. These two things seem to help me out.

Ruffman
03-12-2003, 10:23 PM
Ya, Id go with the LSN richer. Ive read 3 posts today with the same problem. Mine was even doing the same thing and want to test it but my rear bulkheads not in yet and its hard to stear when your broke in 2 :D

ProjectTwin
03-13-2003, 11:32 AM
Help (http://www.traxxas.com/support/troubleshooting/nitro/tmaxx/trx_trouble_tmaxx.htm)