PDA

View Full Version : C5 Savage racer


DaFF
03-11-2003, 06:40 PM
Just wanted to show you my Savage Racer...

http://pic3.picturetrail.com/VOL17/812644/1445764/21478879.jpg

http://pic3.picturetrail.com/VOL17/812644/1445764/21478872.jpg

http://pic3.picturetrail.com/VOL17/812644/1445764/21478891.jpg

The weight to power ratio improved drasticaly from box stock:

I can guess the stock .21BB pumps out about 1.9 hp while the C5 is rumored to be close to 3.0 full horse

The weight box stock is around 5.300 kg (11.67 lbs), while mine is now at 4.900 kg (10.79 lbs). I am sure weight could go down even more, probably around 10 pounds...

So weight to power ratio went from 11.67/1.9=6.14 lbs/hp to 10.79/3=3.6 lbs/hp :)

That's quite a bit, and performance are nothing short of spectacular now :D

Modifications so far:

- RB C5 B with .21BB pull starter (custom mod)
- RB086 pipe
- RB air filter
- RB concept 25% fuel
- Inline big clear fuel filter
- Aluminum two halves type clutch tuned
- Hitec HS5945 digital servo @ steering - HITEC 605BB for throttle / brake
- 6 volt 770 mAh Robbe mini rectangular batterie
- Custom throttle / brake linkage mod with removal of "c" clip servo saver
- Threadz premounted Bowtie type tire on threadz rims
- One inch custom travel limiter inside shock body (1.5" of ground clearance)
- 35 wt shock oil - 7000 diff silicone front - 3000 rear

Waiting on:
- Drill starter kit

Whish list (hopefully for soon):
- Hot bodies CVDs all around (when available)
- CF Vertigo TVP
- Aluminum shock tower
- Titanium hinge pins, titanium turnbuckle
- Maybe alum HB shocks (depending on weight)
- Adjustable steering servo saver

I have two official race beginning of may. So far, more than 40 MT registered - a dozen savage -

DFF