RC500, RC300, RC250 1/8 on-road cars

[StevePond]

Started at the request of kartrun

[kartrun]

Thanks Steve!! See,the admins do listen!:D Anyways, anyone have one of these? I for one am looking for one in new or like new shape! Post your pics,thoughts or experiences with these cars. Thanks!

[highroller]

I had the RC500 4wd bought it in 85. I only raced it on a club level for 2years and once in awhile down up and down the street to be sure it ran good, was into 1/10th offroad and started getting into oval and 1/12th racing. 1/8th scale died in the area and when it was discontinued I sold it in 93 or so. No problems with car ever, only problem was with glow plugs burning out sometimes. Used the same Paris Rex engine until I sold it.

[arf]

My first car was an Rc300 which I bought minutes after I watched it take second place in the A-main, still hot from the race. It had an Irvine engine which the owner bump-started using a bicycle wheel. I was amazed to learn that the wing actually worked! I could never get the thing to work for me but my greatest thrill was painting a new body for it. I would admire it on the bench for hours.

[nitrohead3000]

It is my dream that associated will get back into 1/8 scale racing again. Their new 1/8 scale car should be based on the nitro tc3 I think that it would do the same thing it little brother did dominate the class.

[highroller]

RC is always evolving and changing. The big early interest was 1/8th gas, then electric onroad 1/12, 1/10th offroad, 4wd offroad, dirt oval, 1/10th oval/onroad,stadium trucks, 1/4 scale racing. touring cars, and micro racing getting popular. If gas onroad gets popular again, then there will probably more kits introduced by more companies.

[chris jones]

From what I understand, the rc 500's that were put togather by Ron Paris were lethal! Does anyone remember when these things had 3speeds on them?

[Coconut]

When I was a kid;I had a Associated 1/8th;think it was their first. Can't remeber but it was a RC1 or 100 or something like that. Flat pan chassis;laminate clutch shoes and just spring steel front suspension and none at the rear. Used a veco .19 with a heatsink add-on and basically a stright exhaust. With that exhaust it was like a toggle switch and we changed it to a sliding baffle. Orbit brand car radio with a steering wheel;kind of like irst Futuba car radio. We arrange a slot car controller bolt to rear with 90 degree bellcrank to the throttle laver on side of radio. This was a while before the RC500.

[highroller]

Any motor that Ron had was a screamer, local guys who were able to travel to some of the big events talked of Ron Paris and how a motor may have been typical at first but after he worked on it, it was like putting a different motor in. 1/8th scale racing didn't last long enough to get into full aftermarket items, plus I was also racing offroad, dirt oval and 1/10th oval was starting. It got the the point Sunday was dirt racing, Wednesday was oval with converted offroad cars, Dominators, SRP1 4wd, Fridays again gearbox & early pan cars, Saturday was either onroad gas or 1/12th racing at another track. Family life and finances started to suffer so RC racing was curtailed, nites not spent racing was taken up in tuning or rebuilding cars or adding hopups.

[ToaDsiX]

I have a rc500 4wd thats in pretty good shape. I am interested in selling it. What kinda price are people getting for these? Its the car only, no radio, or motor.

Thanks~

[ToaDsiX]

*bump1* :)

[ccanada]

Hey Everyone,

I've been collecting the 250's, 300's and 500's for about 5 years now.

I started out in the mid 80's with an rc300. This is in the days before the 300 came with the ball diff. This car had a K&B .21 with a rotary carb. I still have this car.

Now I have quite a collection. I have 1 rc250 that is brand new 1 rc300BD that is brand new (neither have ever had a radio or engine mounted in them). I have 4 other RC300's, 4 RC500's, 1 RC500 with a 2 speed tranny and 1 RC500 with 4wheel drive and 2 speed tranny.

My pride and joy of this collection is a brand new RC500 4 wheel drive with 2 speed tranny. This car has never had a motor mounted in it.

Now my wife isn't happy about the cars being all over the place but it keeps me out of trouble.

I'm always looking for parts and cars.

Chris

[jfle]

Just bought a RC300 roller (brandy new in box) !!!!
Gonna use an OFNA .21 Hyper.
Can't afford anything exotic, heck I paid a mint for the above.
Does anyone know what kinda pipe will fit it ??
I'm thinkin' Mugen will fit.
The exhaust exits from the left (uh, drivers side ??)
Gonna get a Lola body and Elegi tires !
C Ya
John

[GearHd]

I have a near mint RC500 2WD i've had since it was brand new. I've run about 1/2 tank of fuel through it years ago and now the tires are worn really thin. My Question is, does anyone know where I can get foam tires to mount to my stock wheels? Im looking for a tire that can handle the asphalt. My rear wheel diameter is 2" x 2 1/4" wide. The front wheel diameter is 2 1/8" x 1 1/4" wide. Can some please help, i've been looking for quite a while. Thanks.

[berthold]

Hello,
In the early 1980's I was racing my RC300 one a week. In the 1980's their were race tracks in the area that I could race at. Now the local race tracks do not have a onroad race track for gas power 1/8 scale cars. In the last 20 years, I collected a RC1, a RC2, 5 RC100's, 3 Rc200's, a Rc250, 4 RC300's, and 4 RC500's. I also have a garage fill with spare parts. I only start the cars about once a year now. I normally just drive them down the street or I tke them down to the hogh school and run them for a while.

[peterman9000]

Hello,
In the early 1980's I was racing my RC300 one a week. In the 1980's their were race tracks in the area that I could race at. Now the local race tracks do not have a onroad race track for gas power 1/8 scale cars. In the last 20 years, I collected a RC1, a RC2, 5 RC100's, 3 Rc200's, a Rc250, 4 RC300's, and 4 RC500's. I also have a garage fill with spare parts. I only start the cars about once a year now. I normally just drive them down the street or I tke them down to the hogh school and run them for a while.

Hey berthold can I make you an offer for some specific rc-500 parts?

[jerseyevo]

Hey berthold can I make you an offer for some specific rc-500 parts?
oh man i just recently sold one that i had purchased new back in 1992,been hanging in my basement ever since.
i remember when i first got it all the suspension parts were white which i didnt like so i had dyed them black.
it only needed the engine and pipe and only sold it for $75.00,
wish i had done more research before i sold her.
i think i still have the box,manual,receipt and spare parts somewhere.

[peterman9000]

oh man i just recently sold one that i had purchased new back in 1992,been hanging in my basement ever since.
i remember when i first got it all the suspension parts were white which i didnt like so i had dyed them black.
it only needed the engine and pipe and only sold it for $75.00,
wish i had done more research before i sold her.
i think i still have the box,manual,receipt and spare parts somewhere.

Lemme know if you find those spare parts !

[oval racer]

let me know too!! i need a right rear lower arm and right rear hub carrier. i really need these two parts to get mine running again, after that no more running on the local oval, wide open spaces only, w/ no curbs!!!

i only run it when me and my father in-law get together on holidays. he has one as well w/ the greenwood corvette body. i have the lumina body on mine. since i aquired the kit 2-3 years ago, i have only ran it 5-6 times, but iam itching to feel the .21 2wd experience again. funfunfun, open parking lot enjoyment!!

please help!!

[Enda]

Hello there glad to see there are other crazy people who collect great old cars and have their wives ask "what are you going to do with all this stuff!!".

I've been restoring old R/C cars now for the last year - I live and breath them and have just been offered an RC250 as a trade against a CEN MT (which I've upgraded to 2 speed). The RC250 does run but well used and was raced for a number of years. It comes with loads of tyres, shells and I'm assuming/hoping spares. What value should I put on this car and do you recommend I buy it in the first place - normally if I can't buy the parts I make or modify - is this an option with this old car??????. Cheers E N D A (Ireland).

Hey Everyone,

I've been collecting the 250's, 300's and 500's for about 5 years now.

I started out in the mid 80's with an rc300. This is in the days before the 300 came with the ball diff. This car had a K&B .21 with a rotary carb. I still have this car.

Now I have quite a collection. I have 1 rc250 that is brand new 1 rc300BD that is brand new (neither have ever had a radio or engine mounted in them). I have 4 other RC300's, 4 RC500's, 1 RC500 with a 2 speed tranny and 1 RC500 with 4wheel drive and 2 speed tranny.

My pride and joy of this collection is a brand new RC500 4 wheel drive with 2 speed tranny. This car has never had a motor mounted in it.

Now my wife isn't happy about the cars being all over the place but it keeps me out of trouble.

I'm always looking for parts and cars.

Chris

[berthold]

Hello Chris,

I tis really hard to a value on a 1/8 Scale Gas Car without seeing it.
Here is the USA, RC250's sells for between $ 65.00 and $ 200.00. The price depends on the condition of the car and what comes with it.
i.e. Engine?, Body?, Servo's, Receiver, Transismitter?, etc.

Also depends on if their are any spare parts.

Bert

Hello there glad to see there are other crazy people who collect great old cars and have their wives ask "what are you going to do with all this stuff!!".

I've been restoring old R/C cars now for the last year - I live and breath them and have just been offered an RC250 as a trade against a CEN MT (which I've upgraded to 2 speed). The RC250 does run but well used and was raced for a number of years. It comes with loads of tyres, shells and I'm assuming/hoping spares. What value should I put on this car and do you recommend I buy it in the first place - normally if I can't buy the parts I make or modify - is this an option with this old car??????. Cheers E N D A (Ireland).

[WildWill]

Hi folks,-
I am living over here in Germany and in my younger days I was the first overseas team driver for associated.
I won 3 times German ChampionShips for Associated, took part in 2 Worlds (Pomona/Ca. and Geneva), met all those wonderful guys like Gene and Curtis Hustings, Bill Jianas, Roger Curtis, Butch Kroell, Chuck Phelps, Rick Davis, Pete and Repete Fusco, ect.ect.
Even Gene and the Campell Brothers from Delta came to see me at my home when they raced in Geneva.

I have given up racing a long time ago,- now my son, 19 years old, is racing and I am his pit man.
(Got 2nd. at German ChampionShip 1:8 Nitro in 2004)

As my Club plans to start with a vintage Series (Pan Cars) this year, I would love to take part with a RC 300.
Any advice where I could find one??

Thanks for any help

Old´n slow WildWill

[berthold]

Hello Wildwill,

You can look on ebay.
There have been several up for sale in the past couple of weeks.

Bert


Hi folks,-
I am living over here in Germany and in my younger days I was the first overseas team driver for associated.
I won 3 times German ChampionShips for Associated, took part in 2 Worlds (Pomona/Ca. and Geneva), met all those wonderful guys like Gene and Curtis Hustings, Bill Jianas, Roger Curtis, Butch Kroell, Chuck Phelps, Rick Davis, Pete and Repete Fusco, ect.ect.
Even Gene and the Campell Brothers from Delta came to see me at my home when they raced in Geneva.

I have given up racing a long time ago,- now my son, 19 years old, is racing and I am his pit man.
(Got 2nd. at German ChampionShip 1:8 Nitro in 2004)

As my Club plans to start with a vintage Series (Pan Cars) this year, I would love to take part with a RC 300.
Any advice where I could find one??

Thanks for any help

Old´n slow WildWill

[berthold]

Does anyone have a RC250 manual that they can fex or eamil me?
What a RC200 manual?

[berthold]

Does anyone have a RC250 manual that they can fax or email me?
What about a RC200 manual?

[teamlosiracer]

It is my dream that associated will get back into 1/8 scale racing again. Their new 1/8 scale car should be based on the nitro tc3 I think that it would do the same thing it little brother did dominate the class.

that would be sweet :)

[berthold]

It would be great if Associated would start making 1/8 scale on road cars agian, but they do not have any plans on during that. Their forus is more in the off rad Gas trucks market.

[teamlosiracer]

Hey Everyone,

I've been collecting the 250's, 300's and 500's for about 5 years now.

I started out in the mid 80's with an rc300. This is in the days before the 300 came with the ball diff. This car had a K&B .21 with a rotary carb. I still have this car.

Now I have quite a collection. I have 1 rc250 that is brand new 1 rc300BD that is brand new (neither have ever had a radio or engine mounted in them). I have 4 other RC300's, 4 RC500's, 1 RC500 with a 2 speed tranny and 1 RC500 with 4wheel drive and 2 speed tranny.

My pride and joy of this collection is a brand new RC500 4 wheel drive with 2 speed tranny. This car has never had a motor mounted in it.

Now my wife isn't happy about the cars being all over the place but it keeps me out of trouble.

I'm always looking for parts and cars.

Chris

do you have a pic of rc500 4wd

[aksarben]

Berthold

I already fax you RC250/300 manual.

[ctfv36]

Dusted off my rc500 2wd and my DELTA Super J pan car and took them to my local track see how well,or if they would run.I was amazed how well the two cars were recieved.The MUGEN,SERPENT,KYOSHO,drivers wanted to see and talk about the old cars and were really blown away when they saw them running on the track!one was actually taking pictures of them with his camera phone.I talked to a club officer who said he'd like to see a vintage 2WD class started. HMMM... maybe I'll end up selling my Mugen MRX-3,had a better time with my "antiques"!

[berthold]

Hello,

I get similar results when I take my vintage cars to the track. I have a Vintage Associated RC1, a RC2, several RC100's, a RC150, several RC200's, several RC250's, several RC300’s and several RC500’s. I also have a Delta Super J, and a P2G. The old timers love the old cars. I also have lots of spare parts for my cars.

[nitrohead5300]

You got a Delta Super J???? Would you please posta picture of that??

[ctfv36]

You got a Delta Super J???? Would you please posta picture of that??
I'm not very Computer-literate with that kind of stuff,but I've got friends coming to the rescue,hope to have them on for you in a couple of days.Thanks for your interest! CTFV36

[ctfv36]

Hello,

I get similar results when I take my vintage cars to the track. I have a Vintage Associated RC1, a RC2, several RC100's, a RC150, several RC200's, several RC250's, several RC300’s and several RC500’s. I also have a Delta Super J, and a P2G. The old timers love the old cars. I also have lots of spare parts for my cars.
That's an awsome collection of cars!How many of them are runners?

[ctfv36]

You got a Delta Super J???? Would you please posta picture of that??
I'm sorry but I can't seem to get these photos posted (keeps telling me using too much jpeg).But what I can do is direct you to a web site that has pictures of the car the day I purchased it. WWW.NERCAR.COM is the web site,at the top of their home page you should see a box that says PHOTOS put your cursor on it and scroll down to JULY 10 & 11 , on that page about halfway to 2/3 of the way down there is four really clear pictures of my car,but I must say it looks in little better shape now...not much but a little.

[nitrohead5300]

Thanks, ctfv that brings back pleasant memories!! That Delta Super J was one of the best handling cars I ever had and the customer support you got from delta made you a top contender at any track!!!

[ctfv36]

Thanks, ctfv that brings back pleasant memories!! That Delta Super J was one of the best handling cars I ever had and the customer support you got from delta made you a top contender at any track!!!
I agree with you 100%,the DELTA Super J was THE BEST 1/8 pan car ever produced... but I'm sure we would get some arguements from the guys who raced ASSOCIATED RC300s!

[ctfv36]

Does anyone own or have pictues of or just remember any of these 1/8 pan cars from the 70s. A Mike Morrissey produced chassis called a TAURUS , or a car built by Dell Fisher called MARKER MACHINE , or a chassis produced by Chuck Hallum called an HRE-1 , or a chassis put out by MRP (Model Racing Products)?

[oval racer]

HI GUYS, I NEED A RIGHT REAR HUB FOR A AN RC500. IT IS THE PART THAT CONNECTS THE UPPER AND LOWER ARM TOGETHER AND THE WHEEL BEARING SET IN. HELPPPPPPPPPPP!

I AM TRYING TO GET THIS CAR IN RUNNING CONDITION AGAIN AND THIS IS THE ONLY THING I NEED.

EMAIL JASTROUD@COX.NET

THANKS

[marwankw]

Hi guys

Nice thread, I have an old Kyosho Fantom 21 4iS from 1985 any one knows where can I find a Manual for it?

[berthold]

Hello,

I have Right Rear Hubs P/N 5299 in stock @ $4.75 ea. But I think you want P/N 5264 "Right Hub Carrier.

Bert

HI GUYS, I NEED A RIGHT REAR HUB FOR A AN RC500. IT IS THE PART THAT CONNECTS THE UPPER AND LOWER ARM TOGETHER AND THE WHEEL BEARING SET IN. HELPPPPPPPPPPP!

I AM TRYING TO GET THIS CAR IN RUNNING CONDITION AGAIN AND THIS IS THE ONLY THING I NEED.

EMAIL JASTROUD@COX.NET

THANKS

[x45acp]

looking for parts to restore my 300. would like to get the diff kit

[berthold]

I will check over the weekend to see if I have the parts to put a Diff kit together.

Bert

looking for parts to restore my 300. would like to get the diff kit

[rlim]

I'm in the midst of rebuilding my RC300 which I've dusted off after 20 years in storage. Anyway, I busted the front bumper when I hit into a curb and is seeking a replacement bumper.

Thanks

Ron

[GT Freak]

Heres a couple pics of my NEW(used) 8th scale i just picked up..price: 0,nada,zip,FREE!

[GT Freak]

chassis shot,

[GT Freak]

more shots

[GT Freak]

front

[GT Freak]

under chassis shot
a few ?s
who made this?
what model?
mill has "irving 20" on it...??

what can be done with it?

[berthold]

Hello,
This car was made by Associated.
Looking at he front and read bumbers, this is an Old RC300 car (not a RC300D or RC300BD). This car is the same as a RC250.

[GT Freak]

can someone give me a idea what mill can be put on this car??

[dave_s1]

Hello,
I have two RC500 2wd cars but have never formally raced them (parking lot fun). My first car I bought in about 1988-1989 after seeing an RC250 club racer run and was ready to try building my own. The kit had changed quite a bit from the original 500 (belt drive ball diff, new shock kit, etc) but was really fun to build. I bought a second 500 2wd used and have been restoring/rebuilding it (pic is of the rebuild - almost done). Parts, as you guys know, are a bit hard to find these days. I need a couple of new bodies for my cars. Any ideas where to find them or if newer bodies fit the old cars. Thanks for your time. Dave




Thanks Steve!! See,the admins do listen!:D Anyways, anyone have one of these? I for one am looking for one in new or like new shape! Post your pics,thoughts or experiences with these cars. Thanks!

[ctfv36]

Hello, I too have a 2WD RC500 that I've owned since the late 80's.The body I now use on my car is a SERPENT Porsche 962 , PART NUMBER 1754.This body is still in production and has no adverse effect on the handling of the car.I purchased my body from ASHFORDHOBBY.COM

[dave_s1]

Thanks for the info. I have ordered the body you suggested and am looking forward to finishing this project. My 500 that I bought originally will be thrashed a bit this summer but my project resto car may never see any fuel. Then maybe I'll clean up and "restore" the original and have both of the cars looking good. Thanks again and have a great day.

[Markk]

Bert, give me a call at work. Remember? The guy you got all those parts from?

[dave_s1]

This is one of my RC500s that I worked on this last winter. Many new pieces and hardware. More pics at http://home.comcast.net/~davesipes

[Rayman1972]

Hello. New to the forum.I live in Sydney, Australia and have an RC500 4WD with 2 speed and Novarossi engine which I am restoring.Does anyone have belts and/or cogs for sale for this car? Thanks

[berthold]

Hello,

We have lots of spare parts for the RC500.
Which belt do you need?
Do you have part numbers?

Please email be at bert@jbedesigns.com if you have any questions, or if you need a parts list or manual for your car.

Bert

[x45acp]

I have one of these for sale or trade all so there is two bodies that come with it one is never open nascar any takers??? email me at x45acp@buckeye-express.com thanks

[kenoverby]

Im trying to find more information about 1/8 scale cars that I had. They looked a little like your Associated RC500 but they had a gear drive system, no suspension, tin gas tank with copper piping, blue radio deck, fiberglass chassis, and a similar air filter on one and the other had a smaller Rossi Factory air filter. I think they both had K&B engines. The controllers where the Futaba brown box with a black steering wheel and a side mounted throttle and brake stick. Any help in finding the makers of these cars and the date they where made can seriously help me. The body’s looked similar to the one you have. Please email me at kenoverby@hotmail.com

[kenoverby]

Im trying to find more information about 1/8 scale cars that I had.
They looked a little like your Associated RC500 but they had a gear
drive system, no suspension, tin gas tank with copper piping, blue
radio deck, fiberglass chassis, and a similar air filter on one and
the other had a smaller Rossi Factory air filter. I think they both
had K&B engines. The controllers where the Futaba brown box with a
black steering wheel and a side mounted throttle and brake stick.
Any help in finding the makers of these cars and the date they where
made can seriously help me. The body’s looked similar to the one you have.
Please email me at kenoverby@hotmail.com

[berthold]

Do you have any pictures?

From your descriotion, it can be a Associated RC1, Rc2, RC100, RC200, Rc250, or a RC300. It also can be a Delta or a Serpent, or etc....

Im trying to find more information about 1/8 scale cars that I had.
They looked a little like your Associated RC500 but they had a gear
drive system, no suspension, tin gas tank with copper piping, blue
radio deck, fiberglass chassis, and a similar air filter on one and
the other had a smaller Rossi Factory air filter. I think they both
had K&B engines. The controllers where the Futaba brown box with a
black steering wheel and a side mounted throttle and brake stick.
Any help in finding the makers of these cars and the date they where
made can seriously help me. The body’s looked similar to the one you have.
Please email me at kenoverby@hotmail.com

[kenoverby]

Yup I found a Japanese web site and found that it was a delta from the pictures. However I wonder if I had a newer generation of delta then the ones from the pictures becuase I noticed that I had parts from difforent generations to make up the car's I had.
Here is the site, Make sure to check the whole thing out becuase it is very informative with images. Use the link below to translate the web site from Japanese to English.
Delta Mania (From Japan) (http://www12.plala.or.jp/delta_mania/index.html)
And this Next site is the site I got the above address from.
1/8 Classic Car Meeting (From Japan) (http://park.zero.ad.jp/y-mat/index.html)
And last but not least the site to use for translating the Japanese to English for the above sites. :D :) :D
Website Translator (World Lingo) (http://www.worldlingo.com/en/websites/url_translator.html)
And Finaly, Images of my best car pictures of the Delta, a car I grew up with.
Picture of a Delta with a Slide Carb (My favorite combination especialy if it is a KB engine) http://www12.plala.or.jp/delta_mania/deltack790-41.jpg Images of the Delta CK800 "This is the car I grew up with" Delta is what I think is the best. http://www12.plala.or.jp/delta_mania/delta800-11.jpg http://www12.plala.or.jp/delta_mania/delta800-41.jpg
Click Here for the above images and more. (http://www12.plala.or.jp/delta_mania/ichiran.html)
And finaly a image of my favorite Air Cleaner http://forums.radiocontrolzone.com/attachment.php?attachmentid=64045&stc=1 :eek: :p :)

[nitrohead5300]

A trip down memory lane!! I had one of those Thorp cars back in the day!!

[kenoverby]

A trip down memory lane!! I had one of those Thorp cars back in the day!!

Well thanks for that. I am glad someone has picked me up today. I have been doing supper with searching with google. It took me 2 hours to find those japanese sites. A personal best. Hope I can find something else to do for this and other threads in the near future :)

[nitrohead5300]

Thank you for your efforts

[fuzzymuff]

Well thanks for that. I am glad someone has picked me up today. I have been doing supper with searching with google. It took me 2 hours to find those japanese sites. A personal best. Hope I can find something else to do for this and other threads in the near future :)
Hi.
I am new to this forum.
Let me know if you would like a list of web sites that have vintage cars on them, also if you would like me to download pictures of some of my collection of 188 1/8 scale vintage cars.
GRAHAM

[kenoverby]

Im interested. I want images of 1/8 scale vintage cars and some more sites. Either reply in this forum or email me at kenoverby@hotmail.com

[fuzzymuff]

Im interested. I want images of 1/8 scale vintage cars and some more sites. Either reply in this forum or email me at kenoverby@hotmail.com
Hi.
Some web sites worth looking at if you are into vintage cars...
www.rcmag.com look under retro in the forums.
www.wh-racing.de
www.rc-contact.com
www.genehusting.com

If somebody can let me know how to download images on this forum I have plenty of pictures to share.
Graham :) :) :) :) :)

[kenoverby]

Simply click the right mouse button and select save as from the popup menu. Or if the site copy writes and doesn't alow you to save or copy then push the screen print button located usualy above the insert button on the keyboard. And simply open a image editor like Paint and select to past, then simply crop the image only and delete all the rest of the completed screen capture. :D

[rayman666]

hi everbody,was just out running my rc 300,and thrashed the rear gear,would anybody have a gear ? please help!!!!!!!!!!!!!!!,also need a dif for it but that might be asking too much for such an old car,,,,,,please e-mail me if you can get me a gear,,,,@ stingrayou812@woh.rr.com thanks ,Greg

[rayman666]

hi everybody,was out running my RC 300, and trashed the rear gear,PLEASE anybody have one i can buy?? e-mail me at [email]stingrayou812@woh.rr.com

[kenoverby]

Thank you for your efforts

These to sites will have you looking at vintage race photos for a good hour!
Translate the below pages using http://www.worldlingo.com/en/websites/url_translator.html
Sites 1 and 2 are in Japanese.
1. http://park19.wakwak.com/~etomo/gallery/gallery_top.html
2. http://www6.shizuokanet.ne.jp/usr/miyazaki/index.htm
3. Delta's Home Page (http://www.deltainc-usa.com/)
http://www.sir-thomas.com/rc18/DSC_1288.JPG
http://www.sir-thomas.com/rc18/DSC_1604.JPG

Go Delta ! :)
http://www.deltainc-usa.com/ImagesXP4/delta%20pics/3qtr-view-body.gif
http://www.deltainc-usa.com/ImagesXP4/delta%20pics/67AU5576_RJ.JPG

[ElliotCanada]

I just purchased an RC500 Car that was originally bought from Rick Davis from Detroit. It has Davis Mods and Graphite Parts which I believe were cut by Windsor Ontario Canada's Brad Makaric.

I also got a RC300 that was originally raced by Canada's Mario Biscaro.

Does anyone have new 8th Scale Associated unpainted bodies?

I'm currently Racing 8th Scale with a DELTA XP4 at the Ontario 1/8 On Road Racing Club in Hamilton Ontario Canada. Other Club Members show their Kyosho Dash and Parsec at Club Meetings. :teacher:

[berthold]

Hello

I have a couple of brand New Associated Lexan Bodies for sale.
The price is $ 40.00 each.

I also have about 4000 brand new parts for Associated 1/8 scale cars for sale.

Please let me know if you are interested.

Bert@jbedesigns.com

[berthold]

Does anyone have any RC500 4wd parts for sale or trade?

I have a parts that needs a lot of work.

[patrick181]

Bumperini and a shameless plug.

I have a what I believe now to be a new but incomplete RC300 on ebay.

Search Associated RC250.

Thanks

[17nut]

hello everyone i have the following NIP
part #2624 wheel hub rc250 qty 2
part#2622 gear hub rc 300 qty1
if anone needs them lmk shoot me a pm

[james b]

17nut...........i sent you a PM at RC10talk.com...............MATT

[eme760]

can some one tell me as much info on this model? like who makes it? whats the value? where to find parts ect. thanks to everyone

[eme760]

i when to associated website to download the manual for their rc500 but is not the same as thi one.

[james b]

Yes, it is an RC500 4WD, want to sell it? Email me at 007007@ameritech.net

[VintageRacer]

Hello folks, if you are looking for vintage bodies to suit the old Associated 1/8 scale cars, have a look at www.historicRC.com - seriously cool looking cars. Also has web links to some other nice vintage RC sites.

[eme760]

My Used To be RC500 4w is SOLD!!!!!