Tamiya TXT-1 v2.0

[TXT Crazy]

Originally posted by Hairball
Ok, you're a dumbass.


:( :( . Dude I'm really depressed right now. :( :(I'm young and my life sucks :( :( .it should not be that way. :( :(Calling me a dumbass does not help:( .And here is someone insulting the thing that keeps me going:( :(. Realy nice buddy,:( :( I hope someone bans me so I dont have to be on these board EVER AGAIN:( :( !!!!:( :( :( !!!:(

[Maxxedtxtjugg]

Well said speedydave and cheer up Crazy Txt I don't think Hairbrain meant to offend you and I did not mean that your TXT is a toy like a tonka.

[TXT Crazy]

:( :( BLAH!!!:( :( . BS!!!:( :( . I hate you all!!!:( :( :(

[huasze]

Originally posted by Cemetric
I've got some webspace where you can put it ..the question is how are you going to get it on there
:confused:

how about tamiyaclub? they've got an area just for online manuals, and there's no txt-1 manual to be found there yet

[Hairball]

Originally posted by TXT Crazy
:( :( BLAH!!!:( :( . BS!!!:( :( . I hate you all!!!:( :( :(

I can live with that.

[Maxxedtxtjugg]

Does anyone know of a ball end link that would work in place of the ball and sockets used on the TXT? One of the regular break downs I have is these silly things stripping out.
The ones on the shocks are easy you can just replace them with regular shocks but the cantilever links and four link bars are much larger. Somone must build an end link that would work. This would also make disasembly much easier. It is a pain to twist or pry those sockets off and after a while they get to looking kinda rough from removing and reinstaling. It would be much beter to unblolt an end link.

[speedydave]

Originally posted by TXT Crazy
TOY!!!!!!!!!!!!!*** ARE YOU SMOKING!!!!!! And the X factor is crap!!! You are a frikin idiot!!!!!!!!Get out of here you dont know what you are talking about!!!!!!! You don't even deserve to TALK about a TXT!!!! A TOY?????????????A TOY!!!!!!???????????

OK, first off, calm down. This is a hobby, you don't need to go getting so bent out of shape. Second, actually, the TXT-1 is a toy. My T-Maxx is a toy. Hairball's JR Ergo 60 helicopter is a toy. Here is one definition for the word "toy," thanks to www.dictionary.com.

An amusement, a pastime

Are you in this hobby(def. for hobby from dictionary.com is "An activity or interest outside one's regular occupation and engaged in primarily for pleasure.") for fun? I hope you are. We're all in this hobby for fun, as a pastime, for amusement. Wait a second, what was the definition of toy again? Right, I thought so...

By the way, I'm young too(15), and I don't have it easy either. Try not to take so much offense to what people say; it will ultimately tear you apart and bring you down. Hairball is a goofoff, I don't take anything he says seriously. :p Food for thought, man.

[Hairball]

Originally posted by speedydave
Hairball is a goofoff, I don't take anything he says seriously. :p Food for thought, man.

Define goofoff please.

(very good post by the way)

[Hairball]

Originally posted by Maxxedtxtjugg
Does anyone know of a ball end link that would work in place of the ball and sockets used on the TXT?

If you would have read this thread in its entirety, you would have already had an answer to this question. More lazy people...

Kyosho 6.8 ball ends will work. You'll need to buy conical washers (little cone looking thing) to go along with them. It'll cost $30 - $50 to do the entire truck, but you'll be using 1/8th scale parts, so they're much stronger than the stock stuff.

A little locktite and super glue go a long way in the TXT-1

[speedydave]

Definition of goofoff, thanks to dictionary.com:

goof-off n : an idle worthless person

Close enough... :p

[Hairball]

Originally posted by speedydave
Definition of goofoff, thanks to dictionary.com:
Close enough... :p

Dork.. :) :)

At least I don't destroy Traxxas vehicles by the ton.

[speedydave]

Originally posted by Hairball
(very good post by the way)

Thank you! :D

[Hairball]

Originally posted by speedydave
Thank you! :D

Don't let it go to your head.... :p

[TXTRCR]

i was thinking about doing a nitro conversion in the same manner that hairball was speaking of. that is going to be expensive, 2.5 maxx tranny 65 bux linkage and all, motor another 150 or so, and all the parts to make the TXT-1 beefier. lots of cash i dont have.

but i did manage to find a way to have fun with my TXT-1.

A Super Rooster, dual 1500 6 cell packs in series and dual 17x2 speed gems in parallel.

performance equal to that of the 2.5 maxx with a lot more torque, less speed however but in this case thats a good think i was looking to get more torque, not particularly the speed i got it was just a bonus. 20-25mph maybe more i dont have a radar gun or have access to one. but its fast.

what can i do about the linkage to make it stronger, the plastic ends keep seperating from the aluminum rods.

and something else i dont understand started happening, when the truck is on the move if i turn the steering know and hold it, and release the throttle the truck will continue to move in a circle. with out the throttle lever being moved. weird huh

do you think the 12 cells maybe starting to work on the speed controls innerds

[Hairball]

Thats because you're steering servo is sucking too much juice.

Normal. Get a Rx pack for you radio gear, and stop using the BEC off the ESC.

[Ronin1973]

Dear Annie...

[Hairball]

Originally posted by Ronin1973
Dear Annie...

***?

[timetraveler]

i have an airtronic's(358) 200 oz servo.From what I understand it's supposed to be the strongest for steering.I do rock crawling and the servo cant turn the wheels untill the truck is rolling which really suck's!Do I need a RX pack?
Help please!

[civicds]

alright i got a question. i think earlier in this thread people said there ball links poped off. is that right? well my question is if so how? i bash and race my txt-1 around with e-maxxes and havent had one ball link pop off at all. I cant say the same for the drive shafts one of them poped off when pulling my friends e-maxx. yes i out pulled him but i was thinking on getting those boot thinges to put over the grub screws so that would fix that problem. anyways as for the airtronics servo problem my hitec 645mg servo has 133oz of torque and moves the wheels just fine when they are on the ground and the truck is just sitten thereand i dont use a rx pack. but in your case i would suggest getting a rx pack.

[hua15]

I started this a few week back, now I am about 70% complete.

This was my original TXT-1 that was laying around for some major enhancement.

http://www.lightplate.com/rcrock/articles/superTXT1/1.jpg

After 6 hours, it got to this point.

http://www.lightplate.com/rcrock/articles/superTXT1/9.jpg

http://www.lightplate.com/rcrock/articles/superTXT1/14.jpg

Here is the power plant:

http://www.lightplate.com/rcrock/articles/superTXT1/15.jpg

And yesterday I started on part II of this project.

http://www.lightplate.com/rcrock/articles/superTXT1/19.jpg

http://www.lightplate.com/rcrock/articles/superTXT1/23.jpg

http://www.lightplate.com/rcrock/articles/superTXT1/21.jpg

http://www.lightplate.com/rcrock/articles/superTXT1/22.jpg

Stay tuned for Part III. When I am done, I will be taking it to the beach and do some driving on a sand hill.

-Hua
RC4WD.COM

[jeepinator]

That looks fantastically expensive!

[TXT Crazy]

Ok i'm not mad anymore I'm just jealous. That is the coooolest thing I have seen!!! All nice blue aluminum with Engraved lettering, Brushless motor, with E-maxx 2 speed transmission. Cool shocks, Carbon Fiber, Sweet tires + Wheels. New Era Skid plates. ESP hobby steering rod kit/set thing and to top it off a SWEET HUMMER!!


Will you sell it to me? Ive got hmmm....lets see *Running around house trying desperately to find money to see it Hua will ell me his truck*........I got 327 Doallars....hmm.... I don't think thats enough.:( :p :D

[jeepinator]

Hua, please post a parts and manufacturer list for your project.

[hua15]

Thanks Guys, all parts are available on RC4WD.COM.

-Hua

[Hairball]

Hua -

Can you get those blue parts without the lettering? And how about in silver?

[TXT Crazy]

I dont even see most of those parts on RC4WD, Hua I thought you said ALL of them are there?

[hua15]

Guys, my site is going through a major update right now. Please check again in about 2 hours. thanks

Again, almost all of those parts are in limited QTY.

-Hua

[Ronin1973]

:D BLING BLING :D

Hua,
don't forget the TTR wheelwideners.
They should help cornering;)
I just got my BL setup back from repair.
What size pinion are you running?
How many cells?




Anyone got some spare TXT-1 bodyposts lying around?
I clipped mine a bit short and need some new ones.
Lemme know.:rolleyes:

[TXT Crazy]

He must have a reason for not using wider wheels things, maybe for lOOks.:confused: . I have MANY extra body posts laying around. But for the price i'd give ya mine, you could get these. And plus If you stripped out you ball ends you get four more.



CLICK ME NOW! (http://www2.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=++&FVSEARCH=0005848&FVPROFIL=++)


Starbursts Are EVIL!!! IT just ripped one of my teeth out that wasnt even loose!! :p :confused:

[hua15]

Wheel Widener is not needed for this setup, because I am running on the new TXTmax wheels, which directly bolt on to the hex.

On my test run, I might use the stock wheel instead, don't want to scratch those new wheels.

-Hua

[TXT Crazy]

If the good wheels are to good to use you could give then to me! Please I'll be good.:p jk. No seriously I am in need of hop ups my TXT is mad at me because i'm broke and I dont have enough money to spend on her.

[Ronin1973]

Thanks for the link TXT crazy,
that's exactly what I'm looking for.

At least I can order them at my LHS now.

[TXT Crazy]

Welcome Ronin1973.

[hyperstang]

Hey HUA,
are the brushless motors available on your site too. I am interested in getting this for my TXT and picking up a two speed tranny....

Race on

[hua15]

I only have one for sale, that's the modeltech one.

I use to carry brushless motors, but it never got so popular, so I took it off.

-Hua

[hyperstang]

How much is it??? Also do I need a special type of ESC or can I run it with my Super Rooster?

Thanks

[hyperstang]

I currently run 2 14 turn Jaguar motors with stock pinions (15T). Will one of these brushless be faster then these two????

Right now our local hobby shop is starting up there monster jam and I need to beat modified clod busters....

I think I am the only one running a TXT....

[hua15]

With that, maybe a set of txt-1 wheel widener, you might be some clods ;-)

It's $450 with controller.

-Hua

[TXT Crazy]

Does anyone know what the Motor Limit is on the Super Rooster? My old motors suck and are wore out I need some new ones.

[Hairball]

Super Rooster "limits" -

For a single motor, its unlimited. For dual motors, its like, uh.... damn, the manual doesnt say.

It states for parrellel wiring, that you cut the lowest turn motor you can run in half. So, if your running one 8 turn, you can run two 16 turns in parrallel.

So, if you can figure out with half of unlimited is, use that number.

(hint - email Novak electronics. tell them the application, and they'll recommend something for you)

[TXT Crazy]

Thanks Hairball I dont know what half of unlimites is???? I dont think it exists so I'll just E-mail Novak.

[hyperstang]

I think you can run 16T or 15T in parrallel without over heating the ESC using 7.2V. So I took it to 14T and this makes my TXT wheelie on just about every take off....

May need to gear up a bit....

Race on

[krisI.925]

just find the amount of amps each motor will pull and if that amount exceeds the ESCs limit then dont use them.

[junk4calata]

Dual motor limit is 15 turns - stated on novak's site. That's at up to 10 cells ( but fan will be needed ).

Also, do like Kris925 said. Very good idea.

[TXT Crazy]

Ok thanks I'm going to run a 15 or 17 turn speed gem with a 7 cells. But i cant decide on 17 or 15, any suggestions?

[TXTRCR]

i run 17 turn singles in parallel, and two 6 cell 1500 stick packs in series, thats 14.4 volts and the rest of the truck is stock, and it is awsome, wheel stands from a dead stop and speed is equal to or greater than that of an emaxx in stock form that is.

i have another question that is way off topic but i need an answer. what is the optimum running temp for an old traxxas pro.15 engine, i know they run hotter than normal engines but how much hotter. i am going to be using Trinity Monster Horsepower fuel 20% and i will have a traxxas tuned pipe and header put on the rustler.

[krisI.925]

I have heard that it is perfectly normal for a TRX to run up to 300 degrees. But for a sport type engine it doesnt seem like a good idea. I have a RB C12 that gets that hot most of the time but it is normal for a engine of that many RPMs to create such heat. Personaly I would get a new engine but if you dont have the cash for that I would invest in a cooling head or at least use some thicker compression rings.

[TXTRCR]

thanks man i think i will get a new engine i have about 125 extra cash, what engine would you recomend, give a link so i can get some stats on the engine as well as see a picture of it to see if it will match the truck im going to fix it up real nice with aluminum and carbon fiber stuff. the engine i have is leaking from the front bearing and the head gasket is leaking i think it doesnt have hardly any compression. it still runs though.... sometimes.

[krisI.925]

Im not to sure what engine would be good for you maxx. I would just recommend something of good quality and good torq. My RB cost me about $160 and i have about 6 gallons thru it and still have enough compression to lift up my entire truck by the pull start. And it always runs great and msot of the time i dont even have to tune it.

[Peterbilt]

A question...

I'm tryin to find every part needed to build an entire TXT axel and tranny.

Off of this list (click here (http://www2.towerhobbies.com/cgi-bin/wti0005p?&I=TAMC0280) ) What would I need from that list?

What else would I need (if not listed there)?

Thanks.

[Ronin1973]

Sleep deprivation sucks.:o

[Hairball]

It woudl be cheaper to buy a complete TXT-1 kit and get the parts that way.

Then you could sell off what you don't need and make some money too.

[L96780]

From that list what parts would I need to build one complete front or rear axel? Or would it be cheaper to buy a TXT-1 if I only need the front and rear axel?

[Hairball]

When you buy the parts to build the axles, they come in sets of two. So you'll end up building two axles, wether you like it or not.

(I just did this not too long ago)

[L96780]

What part from that list would I need to build two complete axels? Or what part numbers? How much did it cost to build two complete axels?

[Maxxedtxtjugg]

Would be cheaper to buy them complete like these
http://**************/ws/*******************************3109342607&category=2565

[Maxxedtxtjugg]

Hmm didn't seem to work.
Goto e-bay and search radio control for TXT and you will find some.

[TXT Crazy]

Bye, I don't know if i'm coming back. I'll miss you guys. The same cant be said for hairball, sorry.

[dirtgypsy]

here is the list of parts needed to do just the axles No tranny:
Axle Case (2)
Turn Nuckles (4)
Diff Gear & Drive Shaft
MR16 Drive Gear (2)
MR17 18T Bevel Gear
MR18 15T Bevel Gear
MG2 Bevel Gear Shaft (2)
Bevel Gear Shaft (2)
6 E-Clips
Full Ball Bearings
3x15mm Screws (6)
MB2 3x20mm Screws (16)
MS3 Wheel Axle (4)
Step Screw, Flange Lock Nut, Wheel Hub
Ball Connector ( (for 4 links setup)

all total over $190 at Tower. Figure in another $75 at least to do the tranny. Buy a complete one, strip it, and sell off the parts you don't need.

[newracer]

I just traded for a TXT-1. I am going to use it for crawling pretty exclusivly. I can't decide what would be the better setup a EVX with two batteries (already in truck) or a Tekin Titan (I have one currently not in use) with a 7 or 8 cell pack. I am thinking the Titan would be better, any opinions?

Also what aluminum shocks are other people running? The Tamiya ones look very nice but a lot of $$$. I had some Hot Bodies on my E-maxx that were pretty nice.

[MIKE92085]

yes the titan and one batt would be better for crawling :cool:

[adas123]

Hey guys,:D

I am wondering what is better. Money is not a problem, but what is a better rockcrawler: A modified ClodBuster or a modified TXT-1?

[adas123]

Hey guys,:D

I am wondering what is better. Money is not a problem, but what is a better rockcrawler: A modified ClodBuster or a modified TXT-1?

[adas123]

Hey guys,:D

I am wondering what is better. Money is not a problem, but what is a better rockcrawler: A modified ClodBuster or a modified TXT-1?

[adas123]

Hey guys,:D

I am wondering what is better. Money is not a problem, but what is a better rockcrawler: A modified ClodBuster or a modified TXT-1?
And which ever, Whats a cool setup can I get for rock crawling, and Please tell we some places to buy them! Thanks for the help!!! Please tell me!!!:D

[adas123]

Wooops! sorry about that ! i dont know what i did! SORRY!!!:D

[Hairball]

Originally posted by TXT Crazy
Bye, I don't know if i'm coming back. I'll miss you guys. The same cant be said for hairball, sorry.

Glad to see you finally leave. We don't need people with your whinny little attitude here.

[Hairball]

Originally posted by adas123
Hey guys,:D

I am wondering what is better. Money is not a problem, but what is a better rockcrawler: A modified ClodBuster or a modified TXT-1?
And which ever, Whats a cool setup can I get for rock crawling, and Please tell we some places to buy them! Thanks for the help!!! Please tell me!!!:D

Nice Quad post! :D

A Mod Clod would be better for crawling. It doesnt have the torque-twist problems that the TXT-1 have (not a big deal really) and the Clod does not have drivelines to hinder suspension like the TXT-1 does.

I'm not really sure which truck is going to cost you more in the long run, they can both be very expensive. Check out eBay. There are always deals to be found there.

[adas123]

:D Thanks!,

Ohhh well, I just ordered my new TXT-1!:cool: I am going with it because I like the catilever suspension. Later i'll get ALOT of hop-ups, TTR, RC4WD and mabe something else.

In a few months, I'll probobly get a Mod CLOD too:D


But for sure, I am definetly getting the E-maxx tranny conversion!

See ya,!;)

[newracer]

:D :D I just got my TXT-1 in the mail!!!! I almost had to stay home from work to check it out. I can't wait to run it!! BTW I traded for it but it is brand new barely used.

[tl01_staniland]

im thinking of getting a txt
just wondering how fast a stock one will go
and is it a good idea to get it.......(my first monster truck)

[TXTRCR]

what is up with the emaxx transmissions, why are they so loud?
sounds almost like a gear mesh problem within the transmission case it self. i figured i would ask you cause you seem to have a phd in RC. im not going to do the emaxx tranny conversion its not needed and its not really worth it. stock tranny and 17x2 motors a super rooster and either 12 or 6 cells does just fine. i only run 6 cells now because i want my TXT-1 to last a long time.

[newracer]

Originally posted by tl01_staniland
im thinking of getting a txt
just wondering how fast a stock one will go
and is it a good idea to get it.......(my first monster truck)
if you want a fast MT don't get the TXT-1. it can be made fast but out of the box it is very slow. it is more of a rock crawling machine.

[krisI.925]

Originally posted by TXTRCR
what is up with the emaxx transmissions, why are they so loud?
sounds almost like a gear mesh problem within the transmission case it self. i figured i would ask you cause you seem to have a phd in RC. im not going to do the emaxx tranny conversion its not needed and its not really worth it. stock tranny and 17x2 motors a super rooster and either 12 or 6 cells does just fine. i only run 6 cells now because i want my TXT-1 to last a long time.

All Traxxas trannys are loud and noisy like that. Theres nothing wrong with it, its just how the trannys are. And ya for most people the emaxx tranny isnt worth it. If you just keep a good amount of greese in the stock tranny it will be probably be the last thing to break. And if your going to run those 12 cells in series you ESC will not handle them unless you have a very large fan and new heatsinks.

[adas123]

If tou want alot more speed with the coolest truck, then you still HAVE to have the E-maxx tranny conversion!


It will go as fast as the e-maxx.
:D

[TXTRCR]

im using a super rooster and 12 cells it does just fine doesnt get hot at all, but its also pretty cold outside so when the summer time i probably will need a fan. but i wired it so i can either run 6 or 12 so there is no problem with that. i think the limitations on the speed control are set to cover novaks butt but it says 10 cells so i dont see why not use 12 cells. i havent noticed any malfunctions or overheating.

[krisI.925]

true Novak is cover there ass. But be carful because i have seen clods in the hobby shop running 12 cells but not with motors as hot as the ones your running and iv also seen some guys come in with fried SR just running 10 cells. During the summer you will probably want to add a fan or maybe just some tamer motors. Oh and how do you have the motors and batteries wired? In series or parallel. And you do know that with 12 cells your motors are going to need to be cut about every 10 runs or so unless your running 550 motors.

[Cemetric]

Maybe this post doesn't belong here but I'll risk it ;)

I'm upgrading the electronics on my TXT-1 and wanna replace the wiring with teflon wires like on an ESC ...where can I get this wire in large quantaties like a few feet cuzz on towerhobbies the wire is short and I'll need some more wire not only for my TXT-1 ... where do you guys get your electronics from ?

thanx

Cemetric

[seca95]

how much wire do you need?
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXKX21&P=7
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXKX22&P=7


question, will stock Jugg. tires fit the txt? if not will jugg. rims fit the txt?

[TXTRCR]

thank you for helping me with my TXT-1, I am now on a new mission i am going to build another monster truck from scratch. It will be a Clod/TXT-1 hybrid. i am going to use the Clod style drive train, and the TXT-1 style suspension. i am using some complete clod axles i found on www.rc4wd.com and i am making the frame out of stainless steel and aluminum scraps i found at work. the truck when finished with have the original clod body with working lights, a servo in the rear to raise the front of the body up and down. i will have a false motor in the front of the truck the scale ones that parma i think makes which look like little hemi 427s. the truck will also have 4 wheel steering and cantilever suspension. i already have the frame work done i just need to make the linkage and get the axles on there and ill be in business.

[marcusg]

Gentlemen, I just got a brand new TXT-1, my question is, what do you guys recommend for a new ESC, since that is the first upgrade you should get ? Also I want to build the TXT-1 from the start with full ball bearings, what size, any particular brand/kind, and where can I buy them from ? Last but not least, what motor upgrade do you recommend ? I still want this thing to be a crawler, but with just a little more torque, power, and speed but not a speed demon speed (I have a Emaxx to quench my thirst for that, He, He,). Any help would be greatly appreciated.

Thanks, Marcusg

[newracer]

the Super Rooster seems to be the ESC most people run, I am putting a Tekin Titan in mine, There are full ball bearing kits available. I have Dynamite red seals in mine. check e-bay. The kit motors are great for crawling, if you want more torque and power get Kyosho Magnetic Mayhems

[SegaBowMan]

how much does a txt-1 go for? and when did it come out?

[krisI.925]

I got mine for $350. It really matters where u buy it from. Price range goes from $340-$420 unless you buy on ebay or something.

[Hairball]

I think it came out around the end of 2001.

[Cychalen]

I think it was released in September 2001.
http://www.tamiya.com/english/news/news0109/news4.htm#58280

[marcusg]

Thanks a-lot newracer,

What about the "regular" Rooster, can that work in the TXT-1, and if they can, could they also work with the Kyosho Magnetic Mayhems that you are talking about ? One more thing, any other brand ESC like the ones made by Duratrax for example, would they work in a TXT-1 type set-up ?

Thanks again, Marcusg

[newracer]

the rooster would work too but it wouldn't if you ever wanted to go with lower turn motors, like 15T. it would be fine for the MM's. I don't know if any duratrax esc can handle dual motors, they can probably handle the kit ones but nothing hotter

[civicds]

anyone interested in buying a txt-1. i got a 1 month old txt-1 has like 3 runs on it, comes with all the stock parts, stock body, stock motors etc.. includes a brand new super rooster,a brand new hitec 645mg servo and a couple hop ups. i want to get like $400 for everything. or if anyone has a t-maxx or e-maxx to trade ill do that. e-mail me if interested at civicds@aol.com

[krisI.925]

today was not a good day. I was out running my TXT on my back yard and everything was doin fine. Then my truck started stalling and smoke was pooring out from under the body. My 7018 speed control was frying. I unpluged everything and theres this huge spot on the shrink wrap thats melted thru. I know the controller still works with 6 cells but im not to sure about 12. :(

[hyperstang]

My first attempt of my pictures...From hawaii

[JonDax]

Originally posted by krisI.925
today was not a good day. I was out running my TXT on my back yard and everything was doin fine. Then my truck started stalling and smoke was pooring out from under the body. My 7018 speed control was frying. I unpluged everything and theres this huge spot on the shrink wrap thats melted thru. I know the controller still works with 6 cells but im not to sure about 12. :(

What motor are you using with that 7018? You might be able to get away with 8-10 cells maybe? 12 does seem too high. Did it run again once it cooled down? I melted my shulze controller's shrink wrap a bit too--too high a gear in my xxx4. :D I can't imagine my txt with BL, yours must fly!

[hua15]

One of my customer's truck, let me know what you think.


http://www.rcrock.com/images/truck/xfactor/hawaii/10.jpg

http://www.rcrock.com/images/truck/xfactor/hawaii/6.jpg

http://www.rcrock.com/images/truck/xfactor/hawaii/8.jpg


More pictures are on rcrock.com

-Hua

[Cemetric]

One of my customer's truck, let me know what you think

WOW WOOW

Very nice ... did you do the paintjob yourself as well??

Where do you guys get those parts from ... very cool truck


Question: Do you guys think that the bearings from Duratrax are any good or do you recommend others ?

thnx.

[Hairball]

Originally posted by hua15
One of my customer's truck, let me know what you think.

More pictures are on rcrock.com

-Hua

What axles is that guy using?

[junk4calata]

Originally posted by Hairball
What axles is that guy using?

You need to catch up a little.

XTM x-Factor Axles
Tamiya Light Weight Chassis for the TXT-1
GPM Silver Aluminum E-maxx Tranny case

The rest should be pretty much self explanatory.

[Hairball]

Originally posted by junk4calata
You need to catch up a little.

XTM x-Factor Axles
Tamiya Light Weight Chassis for the TXT-1
GPM Silver Aluminum E-maxx Tranny case

The rest should be pretty much self explanatory.

Bite me. :p :p

Thanks Nick. I knew what everything was BUT the axles, and from the first moment I saw the X-Factor, I've wanted nothing to do with it.

[junk4calata]

Originally posted by Hairball
Bite me. :p :p

Thanks Nick. I knew what everything was BUT the axles, and from the first moment I saw the X-Factor, I've wanted nothing to do with it.

http://grafx-specs.com/News/dino2.gif

You said the same thing about the Mad Force. And just to clarify, No I do NOT have a X-Factor now and I will not get one.

[Hairball]

Originally posted by junk4calata
http://grafx-specs.com/News/dino2.gif

You said the same thing about the Mad Force. And just to clarify, No I do NOT have a X-Factor now and I will not get one.

Yeah, well, the Mad Force is a special case. Its just too damn cool. :D

[junk4calata]

Hua,

No such pics on your site.

[Hairball]

I found them, whats your problem? hehehe

www.rcrock.com

[krisI.925]

Jondax ya it really moves. The controller still works fine amazingly and i bought a CPU cooling fan and heat sink to help keep it cool. Its just a matter of doing it and getting it all back together.

[junk4calata]

Originally posted by Hairball
I found them, whats your problem? hehehe

www.rcrock.com

Why don't you bite me. I saw a similar one on the left in the center but that one had a different chassis, springs, bumpers, so I thought it wasn't it.

[junk4calata]

http://home.1asphost.com/calata1234/RC%20Related/Avalanche%201%20-%20smaller%202.JPG

[hyperstang]

Hey Hua,
Nice....Real nice. This truck looks like it could climb some big mountains....

Race on

[straitaxleboy]

Thanks Hua for posting some shots of my X-TXT!
Thanks for some Awesome Aluminum Parts too!

All I can say is this Truck feels like it was Meant To Be!
Note no swaybars,it doesn`t need any!
I have never had a 4-Link Setup feel so Perfect!


See the Brushless Power,and shift servo?
It is geared to Crawl,but with these Terra Crusher Tires,it is as fast as my modded Emaxx!


Three Packs thru it and it is as you see it,no probs!


straitaxleboy
:D

[dirtgypsy]

hyperstang: very clean looking TXT! I really like the looks of it.

Straightaxleboy: fantastic work. looks like you have some time into that one!

[hyperstang]

Thank Dirtgypsy, I can't stop looking at Straightaxleboy TXT. Awesome work there. What was the time it took for this big bad mamma jamma to be built????

Race on...

[straitaxleboy]

Whole project took about 1 month,mostly from gathering some of the coolest parts on the plantet.The only hand fab here is the trans mounts,and body mounts! Because of parts still on bo...lol
This perticular crop of different Company parts all lego-like fit better than anthing I ever built/made before!
It all felt like opening and assebling the Brand New Tamiya Beast!
Thanks All!
:D

[marcusg]

Fellas, I just got a new TXT-1, If you can do it all over again, absolutley what parts and/or upgrades would you have done, and what would you recommend that I should get, to do this thing right from the get go ?

Keep in mind, I don't care about faster speed (well maybe a little) this is to be my hill/rock crawler( I got a Emaxx for the speed stuff). Just all the neccesary "got to have" items.

Thanks, Marcusg

[junk4calata]

Kyosho 6.8mm ball ends in the links. If you don't care about speed, I'm not going to suggest the e-maxx tranny swap. If you want better motors, stick with the Kyosho motors. And Super Rooster ESC if you don't already have one. But even before you buy new motors, try increasing the number of cells if your ESC can take it.

[newracer]

ball bearings are a must from the start

lock the diffs if you are going to do some serious crawling, I use OFNA diff lock, not permanent like JB Weld :D

with the diffs locked you will need 4 wheel steering

get the Kimbrough #124 servo savers

[seca95]

you also will need some strong servos for steering
this is what I use http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXPB39&P=7 if you use an on board battery like I do it will have plenty of power

[hyperstang]

How do you rig the steering servo to power off of a seperate power supply and still have control from your controller....I see alot of this going on with alot of the monster truckers..

Race on...

[Ronin1973]

It's not really neccesary with standard size servo's, but a must with large scale(1:4)

All you'll need is a so-called Y-connector. 1 end to the receiver, the other 2 to the rx-batt and servo.

[newracer]

to run the servos and rx with another battery pack you connect that pack to battery slot on the rx and do not turn on the switch on the esc, only the switch from the second battery to the rx. the esc will pull power from the main battery pack to run the motors and the radio equipment will run off the second pack.

I needed to do this with my truck because the digital servo I have in the front was not getting enough power and was shutting down. I have a Hitec 5645MG in the front and a 645MG in the rear.

[seca95]

newracer; you mean the esc will funtcion with out being turned on? on my setup I just cut the red power wire from the esc to the rx and run the battery in to the rx

[newracer]

yes, the switch on the esc only regulates power to the rx not to the esc itself

Even with no battery connected to the esc I can turn on the rx and the esc will light up just like normal but no power goes the motors. In my case I am running Tekin Titan, when turned on the LED is red, green with full throttle, and flashing red with full brake, it will do this with just the rx power.

also as soon as a battery is connected to a esc there is power flowing through the esc, even if it is switched off. if you connect a fully charged battery to an esc, even if it is turned off, the esc will eventually discharge the battery, it takes hours but it will

[txt-117]

here are a couple of pics of my txt in the snow

[txt-117]

:p

[txt-117]

:D

[txt-117]

:p

[dlodovichi]

I just won these babies on eBay but I have a question. Will these Team Trinity 17T #9243 (2) work with my TXT-1? Using Novak Super Rooster.

TIA!
Guys

http://www2.gpmd.com/image/t/tric9243.jpg

[Hairball]

Originally posted by dlodovichi
I just won these babies on eBay but I have a question. Will these Team Trinity 17T #9243 (2) work with my TXT-1? Using Novak Super Rooster.

TIA!
Guys

http://www2.gpmd.com/image/t/tric9243.jpg

No. They are meant to be run on 14.4v, straight off the Traxxas EVX. You "could" run them off the Super Rooster at a lower voltage, but the preformance would suck.

Also, I hate to tell you, but those motors are pretty much junk. They wear out VERY fast, and a normal motor lathe will not cut the comm, you need a special lathe to cut them.

Just my opinion, but I've seen plenty go up in smoke.

[dlodovichi]

Thanks for your help. The person I bought them from has 100% return policy so I ended up retuning them. I just don't want to run dual battteries at the moment or add extra cells.

So can anyone here recommend a good set of motors than can run with the stock configuration using a Novak Super Rooster ESC?

[adas123]

HairBall...those monster maxx's will only preform thier best on an EVX. They are disighned for the emaxx. 14.4v instead of 7.2v. But it will work if you hook an EVX for your TXT.

[krisI.925]

i havent ran my TXT in weeks. And we just got some fresh power and its not running. :(

[Hairball]

Originally posted by adas123
HairBall...those monster maxx's will only preform thier best on an EVX. They are disighned for the emaxx. 14.4v instead of 7.2v. But it will work if you hook an EVX for your TXT.

Did you even read what I wrote? :rolleyes:

[hyperstang]

ECHO!!!!!!!

[Hairball]

Actually, the word J@ck@ss comes to mind.

[dlodovichi]

No comments on my last post? Guys? Anyone?

[hyperstang]

I currently run 2 14T Jaguar motors from Peak Racing and they are great. I use the stock pinions and am doing very well with them. I run it with a Super Rooster though....

I also got these off of ebay and they are great....two for 60.00. Not bad..

Race on

[Allen T]

I started reading this thread from page one....then came across this quote from hairball:

QUOTE: "And I'm surprised that you actually read the whole thread, very few new comers actually do that. Most just post a question that has already be answered."

After 25 pages, I decided to just ask!

I'm mulling over what my next R/C purchase will be, and I'm thinking I'd like to get a TXT-1 within a "budget", at first. I've read the FAQ's on "Dr. Doug's" website, but I'm still unclear on some stuff. Here's a few questions:

1) Radio: Futaba PHKA/AM with an MC230CR ESC. Will that ESC be OK to start out with? It's gotta be better than an MSC, right?

2) IF this ESC will work, will I have problems connecting the motors, or is it a simple solder job?

3) Bearings: I know I need them, and I'd rather build it with bearings, and not tear it apart to put 'em in later. Is the New Era set good? Are there other (cheaper) bearing sets that will work?

I have Peak 2400's and a Duratrax Intellipeak pulse charger, so I don't need any of that stuff....I also have a Hitec 645MG servo just sittin' here. I'm sure I'll have more questions, later.

Thanks in advance, and sorry for the long post!
:D

Allen T

[newracer]

1. I don't think that esc will handle two motors, it will probably get too hot and shut down. The MC330CR would probably work though.

2. Most sport level esc's will already have plugs but you will need to make a few mods to hook up two motors, simple soldering.

3. I have heard that the Blue Star bearing sets on e-bay are good. You can get them for less than $35.

[newracer]

I finally got my TXT-1 they way I want it. At least for now.:D

Here is my setuo

full dynamite bearings
Tekin Titan esc
computer fan to cool the esc
Hitec 5645MG front servo
Hitec 645MG rear servo
New ERA skid plates
front and rear Diffs locked with OFNA diff lock
JR X2 tx and rx
5 cell nimh rx pack
homemade carbon fiber radio plate
aluminum wheel hex adapters
tires screwed onto wheels

it runs great!!! and will go over almost anything!!

[SteveK]

How much do the stock TXT-1 chassis plates go for? Or Juggernaut/Jugg 2 chassis plates? I'm looking for something for my Clod, but just wanna get it going quick, not deal with cutting and drilling or soldering right now.

[newracer]

I just saw a pair on e-bay that went for around $50

[Allen T]

I'm revising my list from the above post (about 5 posts up)

Radio: Airtronics BL2DR (I know...cheaper, but I want an EVX!)

ESC: Traxxas EVX

Bearings: Blue Star set

1) Can the EVX be used with the stock motors, without soldering?

2) Also, can the stockers handle two packs?

3) If you stand the packs on their sides, the fit in the tray, don't they?

Thanks in advance....

Allen T

[Hairball]

Originally posted by Allen T

1) Can the EVX be used with the stock motors, without soldering?

2) Also, can the stockers handle two packs?

3) If you stand the packs on their sides, the fit in the tray, don't they?

Thanks in advance....

Allen T

Yes, yes, and yes.

:D

[newracer]

Originally posted by Allen T
I'm revising my list from the above post (about 5 posts up)

Radio: Airtronics BL2DR (I know...cheaper, but I want an EVX!)

ESC: Traxxas EVX

Bearings: Blue Star set

1) Can the EVX be used with the stock motors, without soldering?

2) Also, can the stockers handle two packs?

3) If you stand the packs on their sides, the fit in the tray, don't they?

Thanks in advance....

Allen T

I have an EVX that I am going to sell. It has only been used a hand full of times. It is in mint condition, basically brand new. Let me know if you are interested.

[hellbent]

ok folks I am looking for a emaxx tranny kit and tranny where do i look or do any of you have one to sell me?
also any other suggestions?

[newracer]

www.rc4wd.com

[hellbent]

ok I want the 3 speed tranny as soon as its released that is the way to fly with a granny gear for crawling and a auto 2 speed for racing. thats only $200 that seams fair for being able to have the versatility to go any where and get there FAST!

[Hairball]

Who makes this 3 speed tranny you speak of?

[newracer]

3 Speed Tranny (http://www.rc4wd.com/shop/go.cgi?&shop=city&cart=1874963x30361&session=3e58e6c17dd033e4&L=eng&P=4x4-T001)

[hellbent]

i found it here www.rc4wd.com

[hellbent]

well I thought i would take me longer but i put the txt1 together in 5 hours so tonight i will put in the evx and try it out.
any suggestions?
:D

[krisI.925]

does any one know where they sell the electronic mounting plates for the TXT. You know the plastic board that goes on the top above the motor where all the electronics are mounted. The stock one really kinda sucks and i see a lot of people with graphite ones. I know most of them are custom but was wondering if any one knew where i could buy one.

[TXT Crazy]

Hey guys! I have not been on these boards for a while and I decided to come back! I'm not all sad anymore! I dont know if you guys know, but I got 15 Turn speed gems for my TXT! It is crazy fast! Its now the fastest thing i've ever drove. Well umm............Hi glad to be back

[dirtgypsy]

hey kris1 I contacted brad (v.p)from Thunder Tech Racing and he is going to have a few made sometime in the near future. no word on how many but they will be similar to the spare battery tray that comes with the emaxx tranny conversion only it will not have the center cut out. I will try to post when he gets back to me. or you can check out the Thunder Tech thread on **** for an update.

[junk4calata]

First, TXT Crazy, welcome back.


Also, for everyone else that has decided to replace the stock drive shafts with the Terra Crusher ones, could you please report on how they are holding up and what your running gear is ( motors, ESC, gearing ) ?

I would really appreciate the info cause I'm kinda tired of replacing Maxx shafts after about 2 runs ( And I've had them go bad in under 30 seconds at one time ).

Thanks,
Nick

[Ronin1973]

I don't know about the terra crusher shafts.
But I'm running a 8 cell brushless setup on my TXT, which has got insane power and I'm using 2.5 traxxas sliders without any problems. (I did dowel them however).

Are you using the standard sliders?

[hellbent]

well that 3 speed went to almost $300 and i for one think thats way to hig so i will sit with the 2 speed emaxx tranny till someone comes to there senses on the price.

[hellbent]

what other places are making parts for the txt-1?

[junk4calata]

Originally posted by Ronin1973
Are you using the standard sliders?

Now I am using the 2.5 sliders. They seem to last a little longer, but still bend. When I had the old type sliders, what I was refering to in my previous post is

http://home.1asphost.com/calata1234/RC%20Related/traxxas%20shaft.jpg

[hellbent]

OUCH!!!!!!!!!!! THAT SUCKS

[TheLaxPlayer]

HairBall- I have read this thread in its entirety, so please don't tell me to do so again. But, do you think it would be better to run the stock motors on 7.2v with a Super Rooster, or on 14.4v with a EVX? I cannot afford to buy cells and the stuff to make battery packs, so these are my two choices if I get a TXT-1. Thanks

EDIT: Typo

[SteveK]

The stock Mabuchi 540s will cook very quickly if you use 14.4 volts. You should use 7.2 volts with the stockers, or some mild modifieds, anything over 17 or so turns. A 7 cell pack wouldn't hurt too much, but kind of limits the pack too much for other cars. For really cheap with 7.2 volts, some closed-endbell 20 turn motors from Traxxas, Associated, or HPI RTRs will give more power than the stock Mabuchi's but still run a fairly long time, al for about $16 each.

If you can swing it, an EVX and Titans is probably one of the best setups. Even two cheap packs will work fairly well, and you can get E-Maxx battery sets for under $40 that will work well. Even for vehicles that use single packs the E-Maxx packs are a good deal: Can't find a sport pack like that for under $20.

[Hairball]

Originally posted by TheLaxPlayer
HairBall- I have read this thread in its entirety, so please don't tell me to do so again. But, do you think it would be better to run the stock motors on 7.2v with a Super Rooster, or on 14.4v with a EVX? I cannot afford to buy cells and the stuff to make battery packs, so these are my two choices if I get a TXT-1. Thanks

EDIT: Typo

This comes down to what you want to do with the TXT-1. Climb / Crawl on rocks, or do speed runs and jump the thing.

I've done both myself. I've had much fun with both setups. What am I going to do now? Own two TXT-1s. One setup for rock crawling, one setup for jumping and speed runs. :D

Once you figure out what you want to do with the truck, ask me again, and I'll try and tell you the "must have" upgrades for each setup so you'll be playing with the truck more than working on it...

-=Hairball=-

[hellbent]

give your opinion
I already built a 28.8 volt emaxx how would you like to see my txt1 go to a 28.8 volt?
placing the batteries wont be as easy but i believe it can be done.
what do you all think

[Hairball]

I think you'd destroy the tranny, and the torque roll effect would be very funny. :D

[junk4calata]

Originally posted by Hairball
I think you'd destroy the tranny, and the torque roll effect would be very funny. :D

Can you say side flips as opposed to back flips?

[TheLaxPlayer]

I would want it to go around 15mph, and have tons of torque. I would not really be jumping it much if at all. Is this too much to ask of the stock motors? If so, which mod motors should I get, cheap Kyosho ones, or Speed Gems? I don't have a lathe, so they must be fairly mantanence free.

[newracer]

the kit ones or Kyosho Magnetic Mayhems are the best for torque and crawling

[junk4calata]

TheLaxPlayer, I believe your best bet are the Kyosho Atomic Forces motors. With the stock gearing and stock tranny, you would have both your torque and speed on only 6 cells. I run them and I love them over stock motors.

As for maintenance, Its really not that bad. You could get at least 15 runs out of them before they need a rebuild. And you don't need a lathe. You can do it the cheaper way with a comm stick and just replace your brushes.

And since you stated that you want torque, STAY AWAY from the Speed Gems. Everyone including myself that has tried them knows that they have less torque.

[TheLaxPlayer]

Originally posted by junk4calata

As for maintenance, Its really not that bad. You could get at least 15 runs out of them before they need a rebuild. And you don't need a lathe. You can do it the cheaper way with a comm stick and just replace your brushes.


How long of runs? What is a comm stick? Sorry for the stupid q's, but I only have nitro right now, never owned electric.

[SteveK]

When people say 'run' they mean a full battery pack. Could be 6-12 minutes, depending on your batteries.

A comm stick is a little abrasive stick you use to scrub off some of the 'dirt' on the commutator surface. You take out the brushes and gently press the comm stick against the commutator, spin the motor by hand, and the comm is cleaner than it was before. Not as good as a comm cut, but good enough to see a good performance gain again.

Caring for electric motors isn't very hard: Take them out of the truck, take out the brushes, spray them with motor spray, maybe a touch-up with a comm stick, and a drop of oil on each bearing or bushing, and you're all set. You'll need to replace the brushes when they get to half their original length.

Try the truck with the stock motors at first, and see how everything works. Get an ESC right off the start, with a good low motor limit. The Super Rooster is a good choice. With a big truck like the TXT-1, you'll want to use motors OVER about 17 turns, and the Trinity Speed Gems in the range would be good choices. Kyosho motors are OK, but use odd brush sizes, so replacements could be a problem.

[Hairball]

Originally posted by SteveK
. With a big truck like the TXT-1, you'll want to use motors OVER about 17 turns, and the Trinity Speed Gems in the range would be good choices. Kyosho motors are OK, but use odd brush sizes, so replacements could be a problem.

No no no silly. Speed Gems get take the abuse.

Stock motors, Novak Super Rooster, and some Bolink 8T pinions and you'll be set for rock crawling. You made need to do the E-Maxx tranny swap to use those small pinions though....

Stock motors have the MOST torque out of all the motors I've tried. (no, I haven't tried brushless stuff yet).

[junk4calata]

Originally posted by Hairball
No no no silly. Speed Gems get take the abuse.

Stock motors, Novak Super Rooster, and some Bolink 8T pinions and you'll be set for rock crawling. You made need to do the E-Maxx tranny swap to use those small pinions though....

Stock motors have the MOST torque out of all the motors I've tried. (no, I haven't tried brushless stuff yet).


HB, he's also looking for about 15 mph top speed, not 3mph. While you already know that I also tried that set up, and IT IS a torque monster, top speed really is about 3-4mph.

[Hairball]

Originally posted by junk4calata
HB, he's also looking for about 15 mph top speed, not 3mph. While you already know that I also tried that set up, and IT IS a torque monster, top speed really is about 3-4mph.

You want a torque monster? Stock tranny, 19T Speed Gems, Traxxas EVX Speedo, 15T Pinions.

You'll have more power than you'll know what to do with, just don't expect your motors to last too long. :D

I think anything besides stock motors, or brushless motors is a bad idea in the TXT-1. The amount of maintenance standard 540 brushed motors, and the time it takes to install / remove the motors isn't worth it.

[TheLaxPlayer]

How much less maintanence do stock motors require than 17-19 turn Kyosho Mod motors? Brushless would be cool, but way to expensive.

[Ronin1973]

Brushless is cool, but no good for crawling(long story).
Great for racing though and no maintenance.

I use BL on my TXT for racing/bashing/genral abuse of stock animals etc and Kyosho truck mega motors(22x1) on my clod for crawling.

[TheLaxPlayer]

Originally posted by SteveK
If you can swing it, an EVX and Titans is probably one of the best setups. Even two cheap packs will work fairly well, and you can get E-Maxx battery sets for under $40 that will work well. Even for vehicles that use single packs the E-Maxx packs are a good deal: Can't find a sport pack like that for under $20.

Will the stock (TXT) gearbox hold up to the titans?

[TXT Crazy]

Originally posted by junk4calata
First, TXT Crazy, welcome back.


Also, for everyone else that has decided to replace the stock drive shafts with the Terra Crusher ones, could you please report on how they are holding up and what your running gear is ( motors, ESC, gearing ) ?


Thanks,
Nick

First, Thanks for the welcome. Is'nt He nice everyone!?!?!

I dont know but was I the fisrt to have Terra Crusher Drive Shafts? Second they are running great and have been running great for over a month of running everyday with twin 15 Turn speed gems 19 tooth pinions and a 7 cell 3000 matched pack.

-jack

[TXT Crazy]

Originally posted by TheLaxPlayer
Will the stock (TXT) gearbox hold up to the titans?

If it can handle twin 15 turn speeg gems it can handle those wimpy titans.

[hellbent]

well the 28.8 volts will be ALOT of power but if i gear it correctly and beef the suspension i think i can keep the truck from flipping sideways. by the way the 40 series tires and wheels from proline are awsome on the txt.
if you have an emaxx i would highly suggest making a 28.8 volt as the 30 minute run time is AWSOME and the raw power on command is just mind blowing.
:D

[one_mean_rc10gt]

I have some TXT parts for sale -

4 stock rims and tires used 8 times $45.00 Shipped

stock cants $15.00 Shipped

Front and rear bumpers $6.00 Shipped

Side plates for sale $60.00 shipped

Stock body great shape $15.00 shipped

4" stock 2.5 tmaxx shocks brand new I have 4 of them with stock red springs (2 of the shock caps are broke where the screw goes through) $13.00 Shipped

Stock MSC $6.00 Shipped Brand New

All shipping is to the lower 48 US states.

Thanks

Looking for a 1/4 scale servo or a Y harness with servo reversing or a HiTech 645MG Servo for trade of above items. Thanks
one_mean_rc10gt@hotmail.com

[nascar3]

I just picked up a txt-1 that I am modifying. I know you use pliers to put the upper / lower and cant arms onto the ball connectors. What is the best way to get them off. All help is appreciated.

[TXT Crazy]

Use the same tool. Just pry it off...:D

[hua15]

Dale Sweigart (our official engineer) is releasing the outer shock mount, solve the problem of hitting the body post. Will be available in RC4WD store shortly.


http://www.rcrock.com/product/rc4wd/dale/x-maxx/4.jpg

This is how it looks. And he is also working on the bomb proof battery tray base on 4mm lexan sheet. The final version will look different and it will have holes drilled for 3rd servo support.

What you also see is his custom skid combo 2 speed tranny adaptor.

http://www.rcrock.com/product/rc4wd/dale/x-maxx/5.jpg

Okay, what's next.

Here is MATTHEW THACKER's (bonedaddy) version of the SXT truck.

http://www.rcrock.com/product/rc4wd/dale/x-maxx/6.jpg

Very nice.

Oh, another surpise is coming up this weekend, the aluminum TXT-1 tranny case. Stay tuned!

-Hua

[Cemetric]

And he is also working on the bomb proof battery tray base on 4mm lexan sheet. The final version will look different and it will have holes drilled for 3rd servo support.

Cool .. is this going to be for sale as well ?..cuzz I definetly would like it :D

I have another question ...

I'm finishing my TXT-1 and have some team orion havoks 17x2 motors lying around what do you guys think are they any good for the TXT-1 ?? :confused: :)

Thanks in advance for your replies,

greetz,

Cemetric

[hellbent]

HAU 15 that is a beuatifull TXT-1 but what is the 9 volt battery on the truck for?

[Ronin1973]

Probably the cooling fan.....wild guess.

[hellbent]

i guess this thread is just gona die?
are none of you having fun with your TXT anymore?
I for one have been running mine in the snow and being content that it can outperform a e-maxx in the snow.

[TXT Crazy]

Ya I think It is, I'm not having much fun with my TXT anymore. I'm losing intrest in R/C cars and I dont want that to happen. All my TXT does is cost me money. This thread used to be really lively with new stuff pictures Ideas..ect..But now I guess its not.

-jack

[hellbent]

I still enjoy mt txt and have found with the right set up its pretty durable. you just cant run a big a motor as a e-maxx. but it out performs a e-maxx in the snow hands down

[TXT Crazy]

Oh dont get me wrong I enjoy my TXT very much. But It costs way too much money to keep going, but once I save up to buy another set of ESP 4 links and 1 more terra crusher drive shaft I'm 95% sure It will not break. But there is still one problem its 95% outside right now. I live in florida: NO SNOW. So I set my TXT1 up to kick the crap out of an E-Maxx on the road. Two 15 turn speedgems with a 3000 7 cell HV matched pack(Thanks RC4WD I love that batterie). It will easily out run my TA04 with a special Dyno-Tuned P2K Pro, and 2400 pack. I just need somewhere to cash in my change I have frkin $175.00worth of Change!!! And I'm not about to sort all of those out. I heard there was a place you could take it, but I cant find it.

-jack

[hellbent]

I have been HARD on my txt and I havnt bent or broken anything.

[junk4calata]

Originally posted by TXT Crazy
I just need somewhere to cash in my change I have frkin $175.00worth of Change!!! And I'm not about to sort all of those out. I heard there was a place you could take it, but I cant find it.

-jack


Coinstar Machines (http://www.coinstar.com/coinstar2/cswebframe.nsf/GoHome)

[TXT Crazy]

Thanks so much!!! I'm going right now...Goodbye change...Hello Clodbuster Axels!!!

[newracer]

I just got done running two packs through mine. AWESOME!!! I got some pretty challenging obstacles in my yard. My truck is basically stock. It has bearings, OFNA diff lock in the diffs, 4WS with a Hitec 5645MG in the front and a 645MG in the rear, Tekin Titan ESC, 5 cell rx pack, coolong fan, and a graphite radio plate. I am going to lock the diffs with solder or JB weld, the OFNA stuff works ok but I want more!!! I might go down 1 or 2 teeth on the pinions too.

[seca95]

I would never use one of those coinstar machines, it has got to be on of the bigest ripoffs ever, they charge money to change coins in to paper money, give me a break!!!!!

just take you jar of coins to a bank, they'll do it for free!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


sorry I just can't stand those things!

[TXT Crazy]

How much do they charge? And we went to the bank and they said NO!

[SteveK]

Their website said 8.9% in the US, so 9 cents per $1 you change. On $175 it would be $15.58, if my math is correct. When you consider how long it would take to count out and roll $175 by hand, $16 might not seem so bad.

[newracer]

most banks will charge you too, unless you have an account with them. Any casinos near you? They count change for free, except for pennies.

[TXT Crazy]

WOW...Thanks Steve

[hua15]

http://www.rcrock.com/product/rc4wd/txt1/xr-txt/1.jpg

http://www.rcrock.com/product/rc4wd/txt1/xr-txt/2.jpg

http://www.rcrock.com/product/rc4wd/txt1/xr-txt/3.jpg

http://www.rcrock.com/product/rc4wd/txt1/xr-txt/4.jpg

http://www.rcrock.com/product/rc4wd/txt1/xr-txt/5.jpg

http://www.rcrock.com/product/rc4wd/txt1/xr-txt/6.jpg

http://www.rcrock.com/product/rc4wd/txt1/xr-txt/7.jpg

http://www.rcrock.com/product/rc4wd/txt1/xr-txt/8.jpg

Stay tuned for more pictures. :)

[krisI.925]

wow shiney. :eek:

[HankTheDwarf]

Can some one explain to me how to wire up dual rooster speed controls for dual packs on my Txt. I'm not a newbie but I've never done much with the big electrics before now. I know I can buy the EVX but I have the speedos lying around. Thanks

[HankTheDwarf]

I want to run 2 Roosters, 2- 7 cell packs with a standard 2channel radio. then see what breaks. I cant figure out how to wire the plug for the trottle chanel on the reciever.

[hyperstang]

Anyone know a good gearing for running your TXT with the emaxx tranny. What number pinion should I run with what number spur gear. I plan to run 2 13 turn motors...


Thanks

[junk4calata]

Originally posted by hyperstang
Anyone know a good gearing for running your TXT with the emaxx tranny. What number pinion should I run with what number spur gear. I plan to run 2 13 turn motors...


Thanks

Use the stock e-maxx tranny gearing. It should be a good combo of torque and speed. Then go from there depending on if you want more speed or torque.

[junk4calata]

Originally posted by HankTheDwarf
I want to run 2 Roosters, 2- 7 cell packs with a standard 2channel radio. then see what breaks. I cant figure out how to wire the plug for the trottle chanel on the reciever.

What motors do you want to run?

If you plan on running over 15 turns, a single Super Rooster can take it up to 10 cells. If you want to run lower turns and that's why you want the dual Rooster escs, you would need one of these (http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXZT79&P=7) to split your signal from the receiver.

Keep in mind that if you only want to go down to 12-13 turns each ( as opposed to 15-17 each ) it will not be that noticable because of the extra batter and esc weight.

http://www2.gpmd.com/image/n/novm5325.jpg

[hua15]

http://www.rcrock.com/product/xtreme/txt1/chassis.jpg

http://www.rcrock.com/product/xtreme/txt1/chassis2.jpg

http://www.rcrock.com/product/xtreme/txt1/chassis3.jpg

-RC4WD

[TXT Crazy]

hua, if you want me to buy these parts, your gonna' have to gmme' some money.;) :D

[hyperstang]

Hey Hua...

Do you know when your emaxx tranny conversion w/out tranny will be coming in. I am the one that just ordered from your site.

Thanks for the great products and prices...

LMK..

Race on...

[HankTheDwarf]

Is that just a splitter or is there something special under that shrink wrap? I can make a splitter. Where can I get one. By the way, I just want to run more cells without using goofy 10 cell packs or any other combination. Thanks

[Ronin1973]

I changed the steering setup on my TXT-1.

I took the idea from the xtreme racing jugg setup and applied it to the TXT-1.

Xtreme racing (http://www.xtremercracing.com/images/juggservomountbottomfinished1.jpg)

I had to shave 2mm off the axles, so i could fit a 2mm piece of fibreglass inbetween the axles and axlebraces.

It's a tight fit, but well worth it.

Steering is less sloppy and the radius is improved.

http://members.ams.chello.nl/t.m.gent/MTweb/txtsteering.jpg

I also did something similar for the rear lockout;

http://members.ams.chello.nl/t.m.gent/MTweb/txtlockout.jpg

http://members.ams.chello.nl/t.m.gent/MTweb/clod+txt.jpg

I'm thinking of using the space left over in the "servocups" to place my batts.(2x4cell humppacks instead of a single 8cell)
This should improve the cog.

[junk4calata]

That's a great idea !!! Are those plate from Extreme for the Jugg?

I've got to try it.

[Ronin1973]

They're homemade, but I assume the xtreme ones should work ofcourse.
However, if you want to keep your axlebraces, you have to either shave the braces or the axles to fit the mount inbetween.

[junk4calata]

Thanks for the info. I'd just cut the braces and eleiminate the whole skid and leave the axel naked. Cuts weight and looks more realistic.

Thanks again,
Nick

[Ronin1973]

I'm not cutting my nice bling bling alu axlebraces!;)

[junk4calata]

Originally posted by Ronin1973
I'm not cutting my nice bling bling alu axlebraces!;)

Don't have to. I will try it with the plastic ones. Since I don't want to use the bumper/servo mount anymore, the stock plastic ones would do just fine. Or you could always buy a 1/4" aluminum bar stock and just cut it down and drill 3 holes.

[krisI.925]

Just thought u guys would like to know we are no longer the largest thread. The B/L forum in the electric section is now beating us by 10 posts.

And BTW i ordered some of the AE t-maxx shocks and was wondering if i would need new screws to put them on my truck. Iv seen a lot of TXTs with them on so i figured they might be a close to direct fit.

And one more thing does anyone have one of those wheely bars from rc4wd.com or the one from new era.

And another thing. Does any one know if those XTM x-factor drive shafts will fit the TXT. It looks like they would and if they can handle the power of the 24.7 they should be able to handle my BL motor.

[newracer]

Here is a pict of my TXT-1 in action

http://pics.montypics.com/newracer/2003-03-16/p1010160.jpg

krisI.925- you got a set of 8 shocks right? Want to sell 4 of them cheap?

[krisI.925]

ya i did. But sorry cant im already using them for my rush and stampede also.

[Ronin1973]

http://members.ams.chello.nl/t.m.gent/MTweb/txt1.jpg
http://members.ams.chello.nl/t.m.gent/MTweb/txtreer.jpg
http://members.ams.chello.nl/t.m.gent/MTweb/txtmotor.jpg
http://members.ams.chello.nl/t.m.gent/MTweb/clod+txt.jpg

Here are some pics of my current TXT-1 with new steering setup and 4"shocks.

[junk4calata]

New body

[TXT Crazy]

:( You guys are makin me jealous. Brushless motors, Two speed tranny's. $100 shocks, Sweet hummer bodies, aluminum everything, but Hua, man, he's killin me with these Carbon Fiber Chassis and Aluminum out the ying-yang.:D ;) :p

-Jack

[junk4calata]

Originally posted by TXT Crazy
Sweet hummer bodies

-Jack

Only $16.50 for that body NIB.

Just wait a few more days. I post pics of my quick release battery mount ( 6 cell packs only ).

[TXT Crazy]

Do you like sell things on Ebay or something? 16 Doallars!? Back off everyone, this ones mine! DArn I need a quick realease for a 7 cell.

-Jack

[junk4calata]

Originally posted by TXT Crazy
Do you like sell things on Ebay or something? 16 Doallars!? Back off everyone, this ones mine! DArn I need a quick realease for a 7 cell.

-Jack

Nikko Parts order line 1-800-776-4556

Jeep body 1/10 scale – p/n G477-01-00 $28.50
http://www.nikkoamerica.com/NewFiles/1_10D_Jeep2.jpg

Hummer body 1/10 scale – p/n G504-01-50 $16.70
( Its actually 2 bodies in 1 !! - you can remove the rear area and have it look like a 4 door hummer instead of a wagon ).

http://www.nikkoamerica.com/NewFiles/1_10Hum_enc2.jpg

[Cychalen]

That's nice!:cool: :eek:

[Ronin1973]

Are those hard bodies?

[junk4calata]

Originally posted by Ronin1973
Are those hard bodies?


Yes. And if your going to say that you don't like hard bodies, then go ahead and purchase a Tamiya JUGG 2 hardbody for about $100, or a custom painted lexan body for over $60 that looks too nice to run. And the $16.50 is still cheaper than a clear body for $20.

[krisI.925]

I got 4 of my shocks installed last night. They work a lot better than the stock ones. I was thinking about putting some duratrax gold shocks that i have lying around to replace he rods from the cantalevers to the axles.

[Ronin1973]

Originally posted by junk4calata
Yes. And if your going to say that you don't like hard bodies, then go ahead and purchase a Tamiya JUGG 2 hardbody for about $100, or a custom painted lexan body for over $60 that looks too nice to run. And the $16.50 is still cheaper than a clear body for $20.

Actually I quite like hard bodies, they look better.
However it's a shame to trash 'n bash, that's what lexans for.
And at $16 those bodies are a steel!

Oh, and the day I pay $100 for a body, she better be worth it;)

[junk4calata]

But at that price, you could buy 2 bodies. 1 for show and 1 for fun. And price wise, a painted lexan body will run you more than $33.

[Cemetric]

Hi all,

I'm fairly new to this hobby so please help me with this one...

I have the following servo from hitec: HS-5735 here's the link http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXWB65&P=7 (www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXWB65&P=7)

It's ctualy for 1/4 or 1/8 scale but I want to use it for my second hand TXT-1 which is in near completion ... it's big , do you guys think I can use it in the front without breaking anything??

The car probably will need some modifications because it's so big and I want to put a servo saver on it from kimbrough .

Can you guys give me some tips?

Much appreciated,

Cemetric. :confused: :D

[krisI.925]

The TXT was designed to use 1/4 scale servos. It even comes with the servo mounts for it but u might not have recieved those with your TXT since its second hand. But you can install it no problem altho it might be a little tight between the swing arm and the axle. And you will probably need a RX battery just for the servo.

[hyperstang]

the 1/4th servo will fit perfectly, like it was said before, you will need the sevo mounts for that servo, other than that its a direct bolt on. I have a friend with one and this thing is huge, turns real well though. He is also using a serperate power source such as an RX pack 6V. But I just have a high torque futaba digital servo in mine and that works just as good (don't know the number of the servo off hand). I did hear somewhere on the board or elsewhere, that if you use a super rooster, which is what most of TXT people use, you don't need the extra power source for the servo. Your choice though

[hellbent]

I use an EVX esc from an e-maxx on mine and i will have a e-maxx tranny in it very soon.

[hyperstang]

Same here...Ordered my 2 speed tranny conversion from my man HUA from rc4wd, unfortunately he was out and ordered them directly from TTR. Last I heard his shipment came in and he has them in stock now....so go get'um.


Anyone have traxxas big bore shocks on their TXT? I got a set of four and want to put them on, but do I need to screw both sides into the cantelevers (something like that). LMK

Race on...

[Cemetric]

Geez guys thnax for the quick response , thanx krisI.925 and hyperstang ..

I'll keep my servo then and try to find those servo mounts..I'm sure I'll find some in my LHS ...I have a LRP pro reverse so maybe I don't need an extra powersource but to be on the safeside I might use it...Hyperstang you say your friend uses it ...does he use it for the servo or for the receiver ...cuzz I didn't know you could use the betteries for the servo as wel ...anyway ...thanx again guys...

Keep on givin me great ideas ..love this forum learned alot allready by reading it (took me a while though :D :rolleyes: )

cheezzz

Cemetric

[newracer]

when you use an additional pack it usually runs the rx and servo. I have one in my TXT-1, I am running 4WS with a digital servo up front, a high torque in the rear, and a fan to cool the esc. All you do is connect the additional pack to the battery slot on the rx with a switch. When you run turn on that switch but do not turn on the esc switch.

[hyperstang]

Actually a "Y" harness is what is used on my freinds set up. The battery pack is one one end, the servo plugs into the other and the last end, the end where the two become one goes into the receiver for control. So the servo will constantly have power on. Your main source of power will come from the stick packs plugged into the battery terminal in your RX. So you can control the on/off power with the power off of you ESC, but this will not affect your servo...

confusing I know...need visuals...anyone???

Race on...

[newracer]

that is a wierd setup, doesn't cause the servo to get power from both sources? With my setup the main battery pack only powers the motors, everything else is powered from the rx pack. The switch on the rx pack turns everything on and off.

[hellbent]

I would like to see pictures of that set up,
i cant wait for my new maxx 2 speed to arrive so i can get it installed but if it shows to quick i wont get to do anything with it. had back surgery 2 days ago and cant lift anything.

[krisI.925]

I have my main batteries(2 stick packs) power just the motor as well. Everything else is powered by a single Rx pack including the ESC.

And BTW i installed some traxxas 2.5 shafts on my TXT today with a little bit of modding. Does any one know of anything stronger cause im not to sure these shafts will hold up to long either.

[bongo]

can i use a y-harness to connect two 1/4th servos for 4ws? or will i need to get a 3 channel radio?

and does anyone know if what was posted above about the super rooster is true? i'm probably gonna get this esc for the truck regardless but i'd be good to know when the time comes to hook it up. also, are there any other esc's i should consider?

[hyperstang]

Hey Kris,
I heard that the 2.5 shafts are just as good as the ones that come with the TXT, but cheaper to fix if they broke.

[junk4calata]

Originally posted by Cemetric
Geez guys thnax for the quick response , thanx krisI.925 and hyperstang ..

I'll keep my servo then and try to find those servo mounts..I'm sure I'll find some in my LHS

...I have a LRP pro reverse so maybe I don't need an extra powersource but to be on the safeside I might use it...

Keep on givin me great ideas ..love this forum learned alot allready by reading it (took me a while though :D :rolleyes: )

cheezzz

Cemetric

1) No you won't !!!. You need p/n 0005848 (http://www2.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=0005848&FVPROFIL=++) and then you will need piece #7 for the 1/4" servo as opposed to piece #6 for the standard servo. If you got the trees with the left over parts yet, look for piece #7 on there.

2) I've ran the same ESC, and its a great ESC for the truck, BUT unfortunatly does not have enough power for that servo. There was a guy here that has tried it and it kept cutting off when he steered. Added a battery pack and all was ok.

[junk4calata]

Originally posted by hyperstang
Hey Kris,
I heard that the 2.5 shafts are just as good as the ones that come with the TXT, but cheaper to fix if they broke.

Yup, just as good

http://home.1asphost.com/calata1234/RC%20Related/traxxas%20shaft.jpg


There isn't anything wrong with the stock shafts if you turn them 90 degrees and drill holes into the universal to duplicate the e-maxx shafts grub screw.

[SteveK]

There was some trick on MAxxTraxx or something about toughening up those sliders. You just glue in a snug-fitting dowel inside the male end (I think) and that should work pretty well.

There has to be some MIP CVD bone that will fit.

[Cemetric]

1) No you won't !!!. You need p/n 0005848 and then you will need piece #7 for the 1/4" servo as opposed to piece #6 for the standard servo. If you got the trees with the left over parts yet, look for piece #7 on there.

2) I've ran the same ESC, and its a great ESC for the truck, BUT unfortunatly does not have enough power for that servo. There was a guy here that has tried it and it kept cutting off when he steered. Added a battery pack and all was ok.

Thanks Junk4Calata ... I'll definetly will be using the exta batterypack then ... ..as for the parts ... I just ordered those ...lucky me ... I needed the body posts.

thanx again guys,

Cemetric

[Cemetric]

1) No you won't !!!. You need p/n 0005848 and then you will need piece #7 for the 1/4" servo as opposed to piece #6 for the standard servo. If you got the trees with the left over parts yet, look for piece #7 on there.

2) I've ran the same ESC, and its a great ESC for the truck, BUT unfortunatly does not have enough power for that servo. There was a guy here that has tried it and it kept cutting off when he steered. Added a battery pack and all was ok.

Thanks Junk4Calata ... I'll definetly will be using the exta batterypack then ... ..as for the parts ... I just ordered those ...lucky me ... I needed the body posts.

thanx again guys,

Cemetric

[Cemetric]

Messed up ...double post and the quote didn't work ...


Sorry

Cemetric

[one_mean_rc10gt]

Email me if you are looking for Stock TXT-1 parts and I will tell you if I have it. I take PayPal!!!!! Thanks

eighth_scale@hotmail.com

[krisI.925]

the problem i have with the shafts isnt really the shaft itself. Its the yokes that are attached to the tranny and axles. My stock ones snapped at the years on the drive yokes and same thing happens to the maxx ones that i have. Before i was running one 2.5 yoke and one original yoke and the original ones broke. But i will be getting desent batteries soon and im not sure the 2.5 yokes can hold up to the power.

[one_mean_rc10gt]

What setup were you running to twist that shaft? Were you jumping or hill climbing when that happened?