RC10 pushes in turns

[dlferry]

I have a RC10 GT (Factory team upgrades) the car pushes when trying to make left hand turns. It handles fair on right turns. Looking for any advice in setting up the suspension

[atm92484_3]

First check your trucks droop and make sure the shocks on the same end of the truck are the same length. Next check your toe/camber to make sure they're equal from side to side. You might also want to check and see if the truck steers the same amount in both directions.

If this doesn't fix it, try giving the truck some toe-out (2 degrees), use less camber (between -1 and 0 degrees in the front), add 2 or so ounces of weight to the nose of the truck, dial in some drag brake, and get a MIP clutch so it disengauges when you let off the gas and doesn't continue to push the truck.