PDA

View Full Version : Antenna Wire


jbjints
01-24-2004, 02:19 AM
Can antenna wire be cut or do you just recommend that I tie it down on the inside of my car? My antenna wire is so long that I wrapped it around the antenna guide and tied it down with a wire tie, doesnt look to good.

AEcrazyT3
01-24-2004, 02:28 AM
Dont cut it. The antenna wire is tuned to provide optimal performance. Cutting it can cause problems. If you are having issues with it being to long, then try cutting off a spare piece of lexan and wraping it around the lexan. Just cut little holes in the lexan that will keep the antenna in place so that it does not touch its self.

mtrsprt
01-24-2004, 07:06 AM
I would eat my lunch off that thing AE. Get that out on the road will ya?!!!!:D

AEcrazyT3
01-24-2004, 07:33 AM
HA!.... Not mine! I cant take credit for that thing! My micro looks like a wussy pinto compaired to this one! I just remember the pic on micrors4.com and used it for an example...:cool:

mtrsprt
01-24-2004, 07:52 AM
Well..... HE/SHE should get that thing moving then.

Dino451
01-26-2004, 02:48 AM
I have a similar problem. I have a RX that got its antenna wire cut off near the base(about a inch sticking out). Can I resolder the two pieces. I was hoping to open up the Rx and resolder inside with a knot to prevent the solder from undoing if pulled.

InspGadgt
01-26-2004, 05:00 AM
If you have all the pieces resoldering it should be just fine. Or you can replace the wire entirely but make sure to cut it at the same length.