Mr. Blue
04-17-2004, 08:14 PM
Is there any way i could make my rc10gt sit up higher? It just wont put out what i want it to put out, it always gets stuck!!
E-MaxxDestroyer
04-17-2004, 09:40 PM
If it has 2.2in. rims, you could install some pro-line masher 2k's. Other than the only other thing I can think of is to just crank up the preload and move the shocks as far inward as possible.
'Destroyer
RCBASHERFREAK50
04-17-2004, 09:48 PM
i put tmaxx shocks on mine
it pulled awsome wheelies when u only put them on the front
it sits like 3 to 5 inches off the ground with both
lerningdriver
04-18-2004, 01:28 AM
ok, for more ground clearence what you want to do is first, get stiffer springs, second, set your shocks to the most inward position, and if that's not enough, use an adapter and get some bigger rims and tyres, but if you do, make sure you change the gearing so you dont put too much stress on the engine/motor.
EDIT: you could also try different shocks before you put on different wheels.