Team Losi Mini-T v2.0

[Legend_Car]

ive cleared a 5 foot gap between two jumps with my mini-t

[pedeman]

stock, with the stock batteries, kind of sucks. different motor and different battery, if you drive pretty good, you can do most of the same jumps that everyone else is doing with the 1/10ths. size + weight + speed=good truck :cool:

[mdewitt71]

stock, with the stock batteries, kind of sucks. different motor and different battery, if you drive pretty good, you can do most of the same jumps that everyone else is doing with the 1/10ths. size + weight + speed=good truck :cool:

Yes, I agree, I have 2 mini-ts one with a Raptor motor the other with a Baja motor running the stock ESC with 7.2v packs and am very impressed with the lil machines' speed. May eventually go with a mamba but right now Im happy with em............

[Legend_Car]

baja destroyer what size pinion and spur do you run with your mamba

[rex222]

do any of you guys use gorilla straps to hold your batteries?

[Brian23]

how do u liek the best raptor
and r u runnig sstock esc with it?

[mdewitt71]

how do u liek the best raptor
and r u runnig sstock esc with it?


I have the beast raptor motor and YES I am running the stock ESC.
I have not used my GPS yet to see how fast it goes but I am very happy with it, it seems a bit faster than my Mini with the Orion Baja motor.
Once I GPS it I will let you know the speeds.

[2mcgrath]

im using a 7.2 battery and a baja motor.and i gotta say still not really impressed with the speed..i was under the impression it would be much faster than what it was.by doing all my research on it.i read alot of guys were saying huge difference but not really..the baja with 4 aa's runs about like stock motor with 7.2 pack.runs much better on 7.2 but still not impressive.

[Legend_Car]

i have 2 mini-ts and one is in pieces waiting for a 3racing graphite chassis gpm alloy shocks a mamba 6800 a hitec metal geared servo and some other hop ups, while the other one has a Epic motor in it. I like the speed with a 7.2 battery. i have seen a baja in action. a kid at my track has one in his and can wheelie whenever

[Brian23]

rigt now im running the baja with a losi 7.2 pack and cant pul wheelies from a standpoint even on the high traction surfaces... im thinking i might get the raptor or the graupner 6v 300 motor...

[Brian23]

and does anyone know waht the little pins that come out after you take the wheel off are? only on the back wheels

[Brian23]

and will a larger spur increase top speed or acceleration?

[Legend_Car]

and does anyone know waht the little pins that come out after you take the wheel off are? only on the back wheels


those are your drive pins and yes they are only on the back wheels you need those in and in line with the slot in the rear wheel other wise your truck wont move

[Baja-Destroyer]

and will a larger spur increase top speed or acceleration?

ok its larger the spur more acceleration smaller the less
and for pinion its smaller for more acceleration and bigger for less its opposite of eachother and that goes for everything not just r/c

ben

[Brian23]

i was with my friend today and i was jumping my mini t of his bike ramp and he was jumping his rc18t.. i landed every jump and it diddt bottom out much with all the zipties i used on the shocks as spacers(still dont have oil shocks yet) so after one land the gear mesh got all messed up so i reset it and was going again.. but then again the pinion was no longer touching the spur so it wont stay now and i can get the screws any tighter

[Brian23]

and do u think they will sell drive pins at my lhs?

[Legend_Car]

they should, or if you want to get creative you can cut small body clips like the ones one your mini-t the same length as your drive pin

[Brian23]

i tried bring creative by trying 2 use sodder for them but it just bent

[Baja-Destroyer]

brain just make em out of 1/10th scale body clips its not hard at all ive done it before

[Brian23]

i wasnt able 2 cut metal boddy clips

[Baja-Destroyer]

just use some wire cutters or plyers with the part on them for cutting wire

[Legend_Car]

ya you have to use wire cutters schears wont cut it also dont use solder because it is weak

[Brian23]

o yea lol
thx

[Brian23]

quick question what do u prefer? the rc18mt or mini t, beacuse my friend got an rc18 and it can easily beat my mini t which has a baja motor and it has better steering and acceleration and top end speed and it come with the oil shocks and bearings
the rc18mt just sounds so much better

[mdewitt71]

I do like the 18T and the 18MT, but I am a big fan of Losi (own 4 Losi's) so I went with the Mini-T versus the 18MT.
What pinion and spur are you running with your baja motor?
Do you have bearings in your Mini to include the front wheels?
Did you get the pin in yor rear axle fixed?

[Legend_Car]

his mt is also 4wd. get a mamba and then race him

[Baja-Destroyer]

i just got back from racing theres not a whole lot of difference between them 18t's got the power through turns and mini-t's got jumping it really comes down to driver most of all but i didn't do so good today 1st round- probelms with pinion/spur didn't finish 2nd round- tied for 4th out of 5 lol but thats becuase my ball ends keeping comming undone and i had atleast 2-3min of downtime total in the race so really i did ok then i didnt stay from 3rd and main if i did id not be typing this right now lol but better luck next week then i hope

[Brian23]

stock spur with 10 tooth metal pinion... it doesnt mesh right beause its 2 small
i do not have bearings... whould they increase the performanec alot?
yea i got the drive pins

[Brian23]

i dont really wanna invest in a mamba b/c im geting the assosciated monster gt 4.6

[Legend_Car]

right now in place of the bearings are plastic pieces. bearings would be an upgrade

[mdewitt71]

Now for my question...

What is everyone else running for gears?

I am running one baja motor mini and another with a Raptor V motor both with 60T spurs. The Baja has a 10T pinion and the Raptor has a 11T pinion.
I thought the Raptor was really quick but according to my GPS its only hitting 15 MPH (with my heavy GPS on it), but I figured it was really faster.

[OutcastZeroOne]

Hey guys, This is OutcastZeroOne of Outcast Horizon. Ive seen a few questions about my chassis here so I'll do my best to answer them. The chassis has been extended by 3/8" (about 10mm). It is a little heavier then stock. If you look at the site there is a picture of the sock chassis and my chassis on a scale. I did have to raise the price to $74.99 for all the little fixes I had to do to meet demands a fix a few little issues. I am working to see if I can make my chassis closer to the stock chassis wieght. Ive got an idea and will see about trying it tomorow. Ill keep everyone posted on the status of this.

[teampeter]

I have a Trinity 20 turn, Monster Termination I think. I am at 9/60 right now, but I can do wheelies with a 11/58 ratio on carpet (I don't know about 13/58) with Trinity monster tires slightly modified for traction. I don't know my top speed, but I estimated 30-35 mph with a 22 turn Trinity Termination and 13/60 gearing by driving behind my dad's van. But that's an estimate.
Ciao

Pete

[Brian23]

my gears wont mesh right with a 10t pinon and stock spur? is this normal... the guy at my lhs said that i need a larger pinion so it will mesh write but then ill blow my esc because it will be over geard with my baja motor... even though the mamba is pretty pricey 4 me i think ill pick that up and try 2 find a good gearing... does anyone know if u can run the the stock receiver from the rc18mt with the mamba?

[teampeter]

I had to extend the motor mount holes and the middle motor hole thing (don't know the right name) by grinding them. It works. If your'e scared to grind the motor plate (which you shouldn't be, cause their is hardly a chance you will mess up) , get a spur gear bag or two from Losi (3.50) and hope you get a 61-62 gear spur in there. a larger spur will help and lower the ratio further. And yes, you can use any receiver with the mamba if I am right.
Oh, don't worry too, too, much about overgearing. Your ESC won't blow up that quick, it's just that your motor may wear faster. I have used a 13/58 gear ratio for a whole charge or two with my 22 turn, and haven't blown anything.
Ciao

Pete

P.S. OutcastZeroOne, do you need a servo saver for the chassis? What does the red powdercoating look like? Pics? Lookin' good though.

[Brian23]

i did dremel the motor plate a bit but the motor couldnt go any further

[teampeter]

If there is still space between the tranny and the motor, you can go further. If not, it should be able to accomodate 10/60 gearing.
Ciao

Pete

[Brian23]

but it doesnt have any more room and the gears wtil crunch liek crazy

[OutcastZeroOne]

teampeter: You can use a servo saver if you want, its a good idea to use one since its cheap insurance for your servo. Ive been running a HS-81MG in mine for over a year now with no problems. heres a picture of the bumpers with allt he colors available

http://www.outcasthorizon.com/images/products/tlmtbaja.jpg

[Brian23]

what are those bumpers made of? what are the black dots? do u sell them?

[teampeter]

Nice Outcast! I wasn't sure if the powdercoating would make the colour plasticy, but I geuss not :D Red for me!!!
Brian... I am not sure what is wrong. Does the spur gear look semi-stripped? Show me a pic, and maybe I an figger it out
Ciao

Pete

P.S. I jumped my T 12 feet off a ramp that is as tall as a VHS tape! :eek: :eek:

[Brian23]

yes it is semi stripped because of gear mesh issues

[teampeter]

Time for a new spur gear then.

I was rippin' around in the snow(I know, I know, but it was just too much fun!!) and some thing weird happened. First it slowed right down, but I took it inside and fixed it by drying the engine. Then I tested it, and one, it doesn't have reverse, and two, the radio range is a whole two feet :eek: :eek:
I know what caused the problem, but where is the problem, and can I fix it? It's a stock esc/rx, if that helps. I am guessing that it has moisture stuck in it or something, but I don't know. I'll delve deeper tonight, but any help to speed up the process?
Ciao

Pete

Snow drifting and snownuts, mmmmmmmm..... :D

[teampeter]

No harm done, I left it to dry overnight and it runs perfect.

[Legend_Car]

i dont think i would try it again. too much moisture will ruin them over time

[Brian23]

are nitro mts still good 4 snow?

[OutcastZeroOne]

just an update for you guys wondering about the differeance between a powdercoated and non-powder coated chassis as far as weight. The powder coating only adds 3 grams.

[Legend_Car]

are nitro mts still good 4 snow?


you could run in the snow just seal your electronics and put some foil around the cooling head

[Brian23]

how do i seal the electronics...? and wont it over heat them then?

[Legend_Car]

here is an article that was in RCCA
http://www.rccaraction.com/rc/articles/ht_snoproof.asp

[teampeter]

I'll balloon the ESC next time. One big reason it happened is because we ran through some deep snow. As in inch and a half-ish. Won't happen again....maybe :D
Outcast...for your steering setup, does it develope slop over time? I have an aluminum steering rack and it is more sloppy then stock now.
Ciao

Pete

(Will-you-send-me-a-free-one-cuz-I'm-nice-even-though-you-don't-know-me?)

J/K

[Brian23]

anyone know y i cant start a thread? cuz i wanaa put something in the ft fourrmum

[bikeguy100k]

I'm going to be upgrading my receiver and ESC this weekend and will also be getting a HiTec HS81MG servo. What posts do I use to attach the servo to? The stock servo and posts have two holes per side for the screws, but the Hitec only has one. Any links or help would be appreciated!

Thanks,
Tom

[Brian23]

i wanted to order some gp packs off cheapbatterypacks.com and i wanted to get deans plugs... so do i need female or male? and what size wire should i get

[Baja-Destroyer]

female for battery male for esc and charger and prolly 16guage wire

[pedeman]

Hey guys. I started a mini trailer project, but I cannot finish it due to other projects. It is made of all aluminum, and just needs to be finished. To finish it, you will need to finish the axel setup, finish the tailgate (just put it on). It is a double decker style, fitting 2 mini's into it. The tailgate is a vertical one, and I also have a ramp that fits into the trailer, and you can drive the mini up. I built this when I decided I was bored. If your seriously interested, you can send me a message or an e-mail at Racerman85@msn.com. Serious inquries only. I wanted to offer this to someone here, before I posted this on the main site. Pics available.

[dkj-M3]

i wanted to order some gp packs off cheapbatterypacks.com and i wanted to get deans plugs... so do i need female or male? and what size wire should i get

& what Baja-Destroyer said
Cheapbatterys.com

1. Cell type = 2/3A
2. Number of Cells = 6
3. Pack configuration = Double Flat
4. Wire Size = 16AWG
5. Connector = Deans

I just order 3 packs. They have way more punch than the pack I made from walmart (6cell 2300 energizers AA)

[dkj-M3]

or 7 if you want to go with 7 cells

[Legend_Car]

goodies came in the mail today. Im getting more. I got a 3racing graphite chassis and gpm aluminum shocks. My question is how do you mount a Hitec HS81 Mg servo in the chassis will the HS81mg work with an airtronics mx-3 reciever

[Natedog]

female for battery male for esc and charger and prolly 16guage wire

Right...so that the battery can't short out at the connector as easily...and male for the motor so that you can plug a battery directly to the motor for break-in or testing.

Brian23,
You can't start a new thread because they are all locked and you don't have admin rights. You can only reply to threads that the powers that be start....btw where's our Team Losi Mini LST thread in the Mini & Micro forum???

[Legend_Car]

goodies came in the mail today. Im getting more. I got a 3racing graphite chassis and gpm aluminum shocks. My question is how do you mount a Hitec HS81 Mg servo in the chassis will the HS81mg work with an airtronics mx-3 reciever

does anyone have any idea on how to mount a servo into a 3racing chassis

[Brian23]

ok and do i need a new charger 4 a 7cell? because i have the losi peak charger

[Brian23]

HAppy turkey day!

[Baja-Destroyer]

if u have the losi peak charger u need a new charger no matter what how long it take to charge a battery with that like 2-3 hours? definately upgrade and i may be sellin my mini t now as a roller its the pro with losi street tires on rims plus stock tires 1 smc mini t pack rear anti roll bar kit spring kit and spare parts only raced 2 times and lightly used other wise pm me if ur interested

[bikeguy100k]

I'm going to be upgrading my receiver and ESC this weekend and will also be getting a HiTec HS81MG servo. What posts do I use to attach the servo to? The stock servo and posts have two holes per side for the screws, but the Hitec only has one. Any links or help would be appreciated!

Thanks,
Tom

Anyone?

[Baja-Destroyer]

can u use one of the holes i dont rember what my mount has but my servo has 1 mounting hole so what ever mounts came with my pro work

[Merc4Stroke]

Does anyone have an opnion as to if one ball diff for the mini-t is better than the other?

Losi offers one, but so does...

K factory,
MIP,
Integy,
and I'm sure a few others.

Is one better, or does everyone just make one?

Thanks for your thoughts.

[Natedog]

....btw where's our Team Losi Mini LST thread in the Mini & Micro forum???

I see it's in the new stuff forum... :D

[gene465]

Alright I made the plunge and picked up three of these babies for my two boys and I! I have the pro version and have a mamba sys enroute with the 6800 version. What gearing is being used for this motor? I am planning on some bling as well namely the purple EVO aluminum kit. I will have to wait on the matching purple threaded shocks. Look forward to testing all this out on Christmas. What is the cost of a 3 cell lip with charger anyone have a link? Thanks all Gene

[losi racer13]

psh the mini lst i heard isnt that good, im suprised..well i come to a conclusion. im trying to make the best racer so this is my elec setup. airtronics servo, novak xxl, novak gt, trinity cobalt 16t motor, or xxl , mamba 6800, airtronics servo...only thing bad about the 6800 i think its going to wheelie with gp 6 cells

[losi racer13]

Does anyone have an opnion as to if one ball diff for the mini-t is better than the other?

Losi offers one, but so does...

K factory,
MIP,
Integy,
and I'm sure a few others.

Is one better, or does everyone just make one?

Thanks for your thoughts.
I would just go for the losi ball diff, reason is i have it and it has gave me no problems, just make sure to tighten it good enough so it barely can move, but not too tight.

[losi racer13]

"It is possible to easily and precisely adjust the movement of the cutting tool operating wheel. Tighten or loosen the adjustment screw in the left side of the tool head, which adjusts the pressure on the plastic insert-pad, resulting in fine control of the tightness of tool head movement."

Is this why it is capable to cut mini mod motor commutators?(lotsa mmmm's;))
One18th.com does it. they call it motor reconditioning. you send in your motor to them and they cut the comm, new brushes, new bearings.

[teampeter]

Thanks Losiracer13. Anyone try the Mini-Rage BL?

[Legend_Car]

does anyone know how to mount a servo in the 3racing graphite chassis. What servo would you recommend for my brushless T

[gene465]

Guys need some help with the stock ESC in the RTR, Tried to find some info on it on the Losi site but no specifics. What is the largest size motor and max amount of cells I can run with the stock ESC? I really dont want to read all 800+ posts on this thread! I will be putting the mamba and 6800 in mine but I know I am going to want to speed up the RTRs that my kids are getting. Thanks Gene

[Legend_Car]

i really need to know how to mount a servo in this chassis. i got them both and cant figure it out?

[losi racer13]

Try the airtronics mini servo, along with the servo saver...its faster and better then the hs-55 which is put out by hitec.
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGZR6&P=7
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXWC40&P=7

[Merc4Stroke]

Try the airtronics mini servo, along with the servo saver...its faster and better then the hs-55 which is put out by hitec.
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGZR6&P=7
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXWC40&P=7


Does that servo work with the stock electronics, or is that with an aftermarket receiver?

[Legend_Car]

Try the airtronics mini servo, along with the servo saver...its faster and better then the hs-55 which is put out by hitec.
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGZR6&P=7
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXWC40&P=7


thanks ill try that since it will plug right in to the mx-3

[Brian23]

do i need 2 water proof my motor? or just elctronics?

[Brian23]

hey i just wrecked my mini t lol... made a ramp about 4 ft high and landed on the back left tire.. snapped and a arm and dogbone it pretty sweet

[Lilquake]

I have the chance to buy a mini-t with a team orion big block motor, futaba 2 channel reciever and futaba speed control, a hitec hs-81 micro servo plus 3 battery packs for $115. good deal? the only thing i would have to buy would be a charger.

[Brian23]

does anyone know how 2 take the rear a arms off? im absolutely clueless i dont see how they come off please help

[Legend_Car]

twoards the rear of the car there are a bunch of screws take all those out. take the screw that holds the tranny to the shock tower look for it behind the rear shock tower and i think you can figure out the rest

[Brian23]

thx ill try that out

[Brian23]

ok thanks 4 the advice... i got teh whole back end off and almost everyhting apart, but how do i get the hinge pins or w/e theyre called off?
Thanks, Brian

[Legend_Car]

on the rear end the two rear a arms are connected in the middle with a plastic block with 4 holes in it. there should be a metal piece goes from the l arm to the r a arm. to remove hinge pins, there are e clips on them. use a small screw driver and pop on side off and slide the hinge pin out. presto a arm off. hope this helps

[dkj-M3]

make sure you have, extra e-clips. they get lost very easy after popping them off.

[Brian23]

i ordered the dynamite aluminum a arms and i think it should come with some e clips? i hope.. and thx 4 the help

[Legend_Car]

no problem. i just get to know how to work on them from breaking stuff. It also helped me that i race a xxx-t and the parts are put together all the same way. just smaller

[Brian23]

cool. i got everything off e clips are a little bent but that should be fixable

[Legend_Car]

i sometimes have to bend them back with two needle nose pliers. do you race your mini? or are you going for the bling factor? i stay away from alum parts, i race and i dont want a ton of weight, but when bashing you dont want parts to break. remember aluminum puts higher amount of stress on other parts

[Brian23]

i would like to race but my mom doesnt want me to go that far and she doesnt want to drive me... i also wasnt able to find stock parts until after i orderd the aluminum lol... ya i know about stress on other parts. and i dont really care about looks i just couldnt find any stock a arms but i already bought the aluminum ones..and 2 aluminum a arms shouldnt add 2 much weight rite?

[Brian23]

i just like 2 have fun with my mini i have never raced... i know this is off topic but how does refueling in a nitro race work... because i just bash my nitros and i refuel myslef

[Legend_Car]

i believe, but dont quote me on this. you have to pit and then fill er up. i think there is a guy on your team that helps you

[Brian23]

ohh ic

[Legend_Car]

you should try to get to a race, its a lot of fun. i race at my local tracks

[Brian23]

the closet place near me is like barnstormers or sumthing? that and dirtrunners is where my lhs runs but there was this lhs that was closer that had in indoor carpet track with rammps but he shut down in the summer and i was just starting 2 mod my mini t so i could race there in the winter but theres no place really close were my parents will take me i live in bergen county NJ

[Brian23]

im almost done installing hte a arms i lost a cuoople of the e clips that came with the arms and they seem to be biggger than the stock eclips so i wwhent all the way donw to the lhs (didt make my mom really happy :p) and then when i finnaly looked at the eclips they are the same size as the stock ones bbut ill jam em on :d

[Legend_Car]

here brian here is a list of all the tracks in NJ
http://rccaraction.com/rc/info/rctrack_srch_insert.asp

[Brian23]

thx ledgend

[bakabaka]

Hi!

I picked up a used Mini-T a few weeks ago, and have just recently had the time to look into it. I've fixed a few issues immediately including a stripped diff bevel gear, wildly off camber, and overly tight spur/pinion mesh, but I have now run into one issue where I'm not sure exactly what's wrong.

Often when the Mini-T is powered on, the steering will not work. I'm sure it's not the transmitter, since I've tested with another TX with the same results. I've also tested with another identical Losi servo, it really seems like it might be the electronics. If I push the wheels a bit, the steering seems to wake up, and after a bit of this "waking up" the steering seems fine. Anyone else have these issues? Suggestions? Could this be an artifact of running a Trinity Monster micro motor in the Mini-T, possibly wiping out the ESC?

Have fun! :)

[gene465]

Bak,
I have had a similear problem with the steering. It seems to want to lock up right from time to time with no throttle response when it does that. I adjusted the steering so I would not bind it up when I steer to the right but it still does it from time to time not sure what is the cause of it? Maybe someone else has this problem? Gene

[dub-c]

hmm so when you swapped servos it still acted the same? It seems like it could be something in the ESC/Rec unit.

I doubt the motor has anything to do with it. I think the monster micro was made specifically for the Mini-t wasn't it? Anyway, I have a Orion Baja in mine and I haven't had any ESC/rec problems.

If you know someone with another Mini-t, I would try to swap the ESC's to see if that fixes it. If indeed the ESC/Rec is done I would look into all new (new to the truck could be used) electronics. It's a bit of money but the quality will be much better.

I haven't been to the forums in a while but when I was here I believe the combo most used was a Hitec mini servo with a Novak Spy ESC.

Just a though, hopefully the stock elec are ok though.

[bakabaka]

Hi dub-c,

It seems the problem is fairly common then. I guess it is an RTR that can be had for about $100.... Anyway, I actually have a Novak XRS ESC that I think would fit the Mini-T well. It's sitting in a TB-02 right now, but I'm probably going to buy an ESC for that car which allows turning off the reverse function. The only issue left then is getting a small 2 channel receiver with BEC and a good pico servo. Thank you for the pointers!

Have fun! :)

[Baja-Destroyer]

pico servo is a lil to small lol ;)

[bakabaka]

pico servo is a lil to small lol ;)

Perhaps, I'm pretty sure that's what they call the ones in my electric heli. They looked about the right size, but I've never compared them since I purchased the mini-t. It's not worth taking the servos off the heli and adjusting them again ;)

Have fun! :)

[mdewitt71]

What size of Pinions and Spurs are you all running with mod motors?

I am running stock gears and ESC right now with a Baja motor in one and a Beast Raptor motor in the other Mini-T...................

[Brian23]

that might be a little over geared i might with a bit larger spur or smaller pinion

[dub-c]

What size of Pinions and Spurs are you all running with mod motors?

I am running stock gears and ESC right now with a Baja motor in one and a Beast Raptor motor in the other Mini-T...................
I'm running a Baja with the stock spur and a 12t pinion.

[edit: I don't remember the stock pinion. And on another note, I assume you're using an aftermarket pinion because the stock spline tore out in less than 5 feet when I put the Baja in on 4 AA's to boot.]

[Legend_Car]

Getting ready to complete the mini-t got the brushless and the pro drive train. you think i need an after marktet pinion? how would i mount it?

[mdewitt71]

I'm running a Baja with the stock spur and a 12t pinion.

[edit: I don't remember the stock pinion. And on another note, I assume you're using an aftermarket pinion because the stock spline tore out in less than 5 feet when I put the Baja in on 4 AA's to boot.]

I think they are Losi stock pinions, I looked last night and they are the black ones (plastic I think).
In fact, I do have a lil bag of them, I gotta see if I have smaller ones though, right now all I see is 13T and 14T ones.

[dub-c]

My mini-t is possibly ready to run after being in parts for a long time. I bought a bunch of aluminum parts for really cheap so it got me to rebuild the little sucker. The battery is charging right now so the verdict is still out on if it's in optimal condition.

It's completely rebuilt now but I am worried about the front toe angle. I don't remember what it was like stock since I haven't had it together for so long, lol. Anyway, when the shocks compress the front toe angle becomes very negative, more negative the more the shocks compress. Are the stock ones like that? When the arms are level everything is fine it's just when the shocks compress that the toe goes negative.


toe angle def'n:
http://www.rctek.com/handling/toe_angle_basics.html
"toe in" = negative toe angle

[bakabaka]

Hi dub-c,

My mini-t had the Losi hop-up dampers on it when I got it, but the toe-in doesn't seem to change when the dampers compress. The camber goes in a little bit when you push the truck all the way down, but when the truck is bottoming out there are usually other issues to deal with. Which brand of parts are you using?

Have fun! :)

[dub-c]

Thanks bakabaka,

I'm not sure what the deal is then??? I'm using all stock parts or Dynamite Aluminum parts. I got ~$140 of Al parts for ~$35. Stormer Hobbies is having a huge sale on Al parts, they also have 1200 mAh micro NiMH batteries for $10.

http://stormerhobbies.com/
the battery is right on the top

the mini-t Al parts are here:
http://www.stormerhobbies.com/cgi-bin/searchpn.pl?advanced=on&dterm=mini-t&dterm2=&dterm3=1100+stand+tool&dterm4=&pn=&mterm=Dynamite&oterm=&uterm=&sthumb=on&smode=0


------------------------------------------------------------------------------------------

I was having problems with the gearbox so I bought a ball diff for it (from MIP) and I'm having a hell of a time getting the diff to stay secured. It's hard to describe how it's installed unless you've seen it since it's different from the stock setup, but if anyone has the MIP ball diff and has some pointers on keeping it together I would really appreciate it. I'm temped to use CA on the nut that holds it together but it's such a pain the assemble it I'm afraid it will adhere in the wrong position. Having a degree in engineering really makes me want to throw a few body blows to whoever designed it. They obviously slept through their design for assembly classes.

[bakabaka]

Hi dub-c!

Not sure what could be up with the aluminum parts, do the suspension arms have the same basic dimensions as the stock ones? Also, in my (admittedly limited) experience, keeping the turnbuckles etc level when the truck is sitting helps a lot. I'm no engineer though.

As for the diff, is possible to put a locking washer on it? Rebuilding the diff would be a pain if you had to break a CA glue seal to do it, never mind adjusting it for different traction levels. I still have the plastic gears myself, and since the truck came with a stripped bevel gear I purchased a few extras. I've been thinking about picking up a ball diff to replace the plastic gears, but despite their reputation it sounds like the MIP diff probably won't be the one I buy.

Have fun! :)

[dub-c]

The arms are stock. I only replaced the hubs and steering arms (what the wheels attach to). I usually have the arms level also. I went out to look for a hex driver to make it a little easier to install the diff, but I wasn't able to find one. I don't think anyone makes a 1mm hex driver. If they do I didn't see it at my lhs, home depot, lowes, or towerhobbies.com. I haven't sat down and looked at it for a couple days. I may try to get it all in order later today. Thanks for your help :D

[bakabaka]

Hi dub-c,

I'm pretty sure you want an SAE .050" hex wrench rather than a 1mm, I've been using a Dynamite .050" wrench with my Mini-T.

Have fun! :)

[dub-c]

Holy **** you're right!! Damn, I wasted hours of my life today looking for a 1mm hex driver. I don't know why I so readily assumed it was metric. Thanks, I know I can find a hex driver for it now, yeah!!!

[nvrstsfd23]

which would u guys reccomend the mini lst or the associated rc18mt

[Philly's Finest]

Mini LST. The associated truck is just a rc18t with bigger tires. The mLst is a bigger, better value for the price. It comes with a synthesized fm radio, batt, and charger. Its super fun out of the box and with the drivetrain completely protected its better suited to be ran anywhere.

[Racing t]

yeah go with the mini-lst I have one and is a very fun mini-truck, so far I am in my 15 pack without problems, In stock form you would not believe the performance.

[bakabaka]

Interesting, is the drivetrain of the Mini LST tougher than the Mini-T? Does it have gear diffs by default, perhaps metal ones? I've had a few of the bevel gears strip out on my Mini-T, and I've heard that the diffs are more or less compatible between the Mini-T and Mini LST.

Have fun! :)

[teampeter]

Definately the Mini-LST! Only the centre diff is compatable with the Mini-t ball diff, and a Mini-t ball diff helps prevent the front from unloading. I have only heard of the pinion gears on the diffs stripping (see the MLST forum in the hot news, new stuff section). Mine had a problem w/ my dogbones, and I don't know about AE, but Losi has the best customer service ever! I phoned them about the prob, and then they just said that they'll send me a couple sets. Losi rocks!
Ciao

Pete

[ron1431]

anybody want to sell their stock esc. the mini t isnt fun no more im more of a nitro guy.if i cant find a cheap esc im going to be selling my mini t for cheap.

[nvrstsfd23]

what does esc mean

[mdewitt71]

Electronic Speed Control, its the "brain" that controls the motor and runs it in forward or reverse.

[bakabaka]

anybody want to sell their stock esc. the mini t isnt fun no more im more of a nitro guy.if i cant find a cheap esc im going to be selling my mini t for cheap.

Hi ron,

Which ESC were you using with the Mini-T? I'm probably going to replace the stock electronics in mine in the near future.

Happy holidays! :)

[Legend_Car]

im looking at the 6800 mamba and the competition X mamba. if i got the comp X mamba what would i need for upgrades? i already have ball diff slipper cvds and a better servo and electronics?

[Mini-TBasher55]

Hey Guys and Gals,

I'm a new "member" of these forums, but I've been a long time reader of both the magazine and the forums. I was wondering about some alluminum parts for my Mini-T. I want to get Suspension arms, C-Hubs, Battery tray, Shock Towers, and other parts. My problem is that I'm not sure what manufacture to get them from. My Local Hobby Shop has plenty of Dynamite parts, but I'm not sure whether they are the best. I have had great experiences with them in the past, but I was wondering if anyone has more suggestions. Also, I need upgrades like slipper clutch, cvds, etc.

Thank You

P.S. I already have the shocks.

[turd-furgison]

hi, im new to the mini t and was wonder if the stock esc can handle a mod motor...and if it can what ones?? i already have a 1100 sport pack that ill be usin and am goin to upgrade to bearings and oil shocks ... thanks for your time

[Mini-TBasher55]

hi, im new to the mini t and was wonder if the stock esc can handle a mod motor...and if it can what ones?? i already have a 1100 sport pack that ill be usin and am goin to upgrade to bearings and oil shocks ... thanks for your time


I'm not sure which ones it can handle exactly, but I know you can use the Team Losi speed motor, because I use it. Good luck with your Mini-T! :D

[turd-furgison]

thank you mini-tbasher55

[dub-c]

I have an Orion Baja with a 1200 mAh battery in my Mini-t with the stock ESC and haven't had any problems.

[teampeter]

The only ones it can't use are the Beast 14 and 16 turn motors, Trinity 14, 16, and 17 turn motors, and United RC 14 and 16 turn motors. All these motors have the turn number (14, 16 etc.) in their name (ex. Trinity 17T Pro). I am using a Trinity monster Termination motor which is listed as a 20 turn, and it H-A-U-L-S, hauls, as in h@ul$ *****!!!!!
Ciao

Pete

[turd-furgison]

awesome thanks for the input guys

[Lilquake]

witch motor would u guys recommend? venom fireball or orion big block?

[bigair78]

I just got a mini-t in a trade. It came with a team orion 1100. Is it okay to charge it on my Dynamite vision twin peak charger? It seemed to get pretty warm, pretty quick. I was afraid to leave it on there until it said it was peaked. Is this normal?

[dkj-M3]

charge it at .05 to 1amp, with a 30 mV cutoff/votage threashold. If it got hot quick, you might have charged it at 3amps or higher. not good for 1100's. If you have a temp probe it should peak around 100 degrees. which will just be warm but not hot.

gp1100's or IB1200 are the only packs I would use. much more power than standard packs.

[bigair78]

What is standard gearing for the mini-t?

[Merc4Stroke]

I believe the stock gears would be a 14t pinion with a 60t spur.

hope this helps.

[bigair78]

Thanks

[bigair78]

What's a good servo saver to use for the mini-t?

[Merc4Stroke]

here's a link for the servo saver...

This one was suggested before in one of these forums, but I'm not sure if it was this site, or a different one.

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGZR6&P=7

I guess the airtronics servo (Manufacturer Stock#94091Z) is a good replacement as well. Might want to make a note of that number... I toasted the stock one, and replaced it with another stock not knowing of this one at the time. Next time I'll kick in the extra 10 bucks with hopes that it lasts longer.

[bigair78]

Okay, thanks.

[Legend_Car]

need help with gear ratio for mini-t with 6800 mamba. should i use the stock spur and pinion? i need advise. Can someone link me to a good lipo to use with it? thanks

[Brian23]

wouldnt sugest stock pinion because its pretty large (14 teeth i think) and it strips quite easy mamba would probably shred it 2 pieces :D

[Legend_Car]

so what pinion and spur can i use. Would this lipo work with my mini-t and mamba

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXKAP9&P=7

[Brian23]

im runing stock spur wit 11 tooth pinion

[Legend_Car]

thanks brian ill try that

[Legend_Car]

Does anyone use a HS81MG servo in there mini-t? and do they use it with the integy graphite chassis. i just got mine today, and it is too wide

[montrealer]

Does anyone use a HS81MG servo in there mini-t? and do they use it with the integy graphite chassis. i just got mine today, and it is too wide

Works real good with the 3racing carbon chassis. I just had to sand a few millimeters off the last posts on the aluminum brace that joins the carbon chassis and the front chassis part, I'm pretty sure that the integy is similar and you should be able to make the same simple mods that will alow you to fit the 81MG

[Legend_Car]

mine is 3racing or integy i couldnt tell a difference, will you post pics and did you cut the servo ears off?

[montrealer]

mine is 3racing or integy i couldnt tell a difference, will you post pics and did you cut the servo ears off?

Sorry man, took me awhile to spot your post :rolleyes: yeah I did cut the ears off (like Van Gogh..) and here's a picture of something similar to what I did when I shaved the posts but on a regular chassis just to give you an idea where you need to shave of a few millimeters cause I don't feel like disassembling mine... :cool:

http://www.humboldtblazer.com/photos/servo8.jpg

[Legend_Car]

so do you still mount it will that brace with the 4 screws? you just dont put the things on the ears

[Racing t]

montrealer but how do you hold it to the chassis?

[montrealer]

montrealer but how do you hold it to the chassis?

Well if you shave the posts properly, the servo case will just "snap" between them. Then you put the servo holder plate right over it and voila !

See the 81MG is the same thickness as the regular feather servos the mini-t was designed to use so it is properly secured on both sides and from the top, no need for servo posts anymore.

I tell you, if you make this mod and go ahead with the 81MG, you'll just wonder why you didn't do it earlier. This is how the mini-t's steering design should have been in th efirst place. The 81MG makes such a BIG difference.

[Legend_Car]

so i got the right side post almost grinded as much as i needed, and my knock off dremel decides to die. So project is at a halt till saturday ill get a new one and finish project mini-t 6800 mamba

[montrealer]

so i got the right side post almost grinded as much as i needed, and my knock off dremel decides to die. So project is at a halt till saturday ill get a new one and finish project mini-t 6800 mamba

See, if you have put your brushless motor in your dremmel tool, the post would already be grinded to smitherines... LOL !!! :D

Sorry about your loss, hope you get to try this mod soon.

[montrealer]

so do you still mount it will that brace with the 4 screws? you just dont put the things on the ears

Yeah,

Just don't shave off too much, just enough to let the screw "bite" in the hole

[Legend_Car]

alrite thanks for all your help, i was kinda skeptical about hacking into a 50 dollar chassis

[montrealer]

alrite thanks for all your help, i was kinda skeptical about hacking into a 50 dollar chassis

No problem man, so was I at first.

[bigair78]

okay, quick question. I got an mini t just a while ago. It came with a spare armature and can. I took the motor out and the other armature is in much better shape. So I changed armatures. Once I changed them it's alot better except reverse and forward have switched. Can I swap wires around or what? Or do I have to move the top part of the motor around. I would do this but the cap. is soldered on one side.

Thanks in advance.

[turd-furgison]

are the gpm shocks horrible like alot of their other products are? do they leak or what not?

[montrealer]

okay, quick question. I got an mini t just a while ago. It came with a spare armature and can. I took the motor out and the other armature is in much better shape. So I changed armatures. Once I changed them it's alot better except reverse and forward have switched. Can I swap wires around or what? Or do I have to move the top part of the motor around. I would do this but the cap. is soldered on one side.

Thanks in advance.

Try reversing the servo direction on your transmitter first. Happened to me once when I disconnected the receiver for a while and had not used my eceiver for the same amount of time.

[bikeguy100k]

are the gpm shocks horrible like alot of their other products are? do they leak or what not?

GPM shocks are horrible, I got them and they were leaking in the package. I thought a rebuild would work, but they still leaked really bad.

I went with the Golden Horizon shocks and they are great. Horizion Hobby and Tower has them. Just clean up the pistons before you fill them with oil. :)

Hope this helps!
Tom

[Legend_Car]

well i got my mini-t 6800 mamba project done. i gave it a test drive, and it looks slow. Im sure it is moving fast, but im used to driving my nitro and my e-maxx. Im running it on 1100mah 6 cell. Wow i just tried driving it again, and something isnt right the wheels just stutter and hardly turn. the wheels used to turn fast and the tires would balloon when i had it off the ground, but when i put it down it didnt go very fast. Something is seriously wrong

[turd-furgison]

alright, thanks bikeguy .... ill just get the losi shocks

[bigair78]

My servo doesnt seem to be centering back when I turn. The guy I got it from says the servo saver was from a mini rs4 or something like this. Do you think this is a sevo saver problem or servo?

[Racing t]

Are the smc 1200mah batteries for mini-t any good?

[Redman65]

I'm using TL 1100. If you are looking for something to race I'd look into a "LI" battery pack. Big bucks best bang in the world.

[Brian23]

ledgend car- could it be cogging? what cells are u using? dou have deans connectors?

[Legend_Car]

nah i tighted the slipper and i think its a stripped spur, mamba has too much power

[Brian23]

maybe not TOO MUCH but alot :D

[dkj-M3]

for NiMh get GP1100 or IB1200

[dub-c]

A comment on the shocks:


I have the Losi shocks and they leaked quite a bit as well, even with the extra gaskets/shims. It seems no matter what shocks you get you'll need to use some Teflon tape to seal them. I bought ten rolls of Teflon tape at Sears for ~$2 so at least it's not expensive.

[bikeguy100k]

A comment on the shocks:


I have the Losi shocks and they leaked quite a bit as well, even with the extra gaskets/shims. It seems no matter what shocks you get you'll need to use some Teflon tape to seal them. I bought ten rolls of Teflon tape at Sears for ~$2 so at least it's not expensive.

My shocks from Golden Horizons don't leak at all. No teflon tape is needed.

http://www.horizonhobby.com/Shop/ByCategory/Product/Default.aspx?ProdID=GHH02901

The silver ones are in stock...

[rcracer29]

Any mini-t owners in the West Virginia, Ohio, Kentucky tri-state area?

[rcracer29]

Will the motor from an rc18t fit the mini-t?

[Insane Rival]

Anybody here got an extra stock ESC? Mine burnt up...

[Legend_Car]

Here is my mini-t

6800 Mamba
Integy Graphite Chassis
3 racing shocks suprised they havent broke yet
Mini-t Pro Tranny
MX-3
http://i45.photobucket.com/albums/f64/Gumby70/Mini-t.jpg

[Brian23]

awsome mini t. how do u like hte integy shocks and what weight oil are u using in them? and may i sugest switching to deans plugs it will help alot

[Legend_Car]

nah im using 3 racing shocks with 30 weight oil. id use deans but dont want to switch a bunch of plugs for my other cars

[Brian23]

is the 30 weight oil in front and back?

[Legend_Car]

yeah

[bigair78]

I just got this mini-t a little while in a trade. I bought a new servo and I am having trouble getting it to work properly. Its the hitec hs-51 and i'm using the losi servo saver made for this servo. The mini-t came with the upgrade gpm aluminum steering kit. When I get it mounted up it turns to the right, but when it turns to the left it doesn't seem to go as far. Also when it goes to the left it will not go back to center. It does great to the right. Any suggestions? Thanks in advance.

[teampeter]

How do you attach jpeg images over the kb limit? Make them smaller?
Is anyone in the market for spare plastic parts including hinge pins?
Ciao

Pete

P.S. bigair... try taking the servo saver off, centre the steering trim on the radio, and replace the servo saver. Also look for binding and for the correct length on the tie rod connected to the servo.

[Chachi_RC]

OK fellas....I am asking this question on behalf of a buddy of mine. He has a Mini T that he did some mods to. He has added a lot of aluminum parts to the suspension and also upgraded the motor. For the motor, he used a Trinity Terminator(?), and the battery isn't anything too extreme either. All wheels and tires are stock. My question is that as he was playing around with it indoors the other night, and all of the sudden it stopped. It now no longer works at all. No steering, nothing. Would it be possible for the ESC/Receiver to get fried by just the change of the battery and motor? It didn't seem hot to the touch when it went out, but it just stopped working. For the pinion gearing, I don't think he had changed it too dramatically either. Just looking for your thoughts on this, and any ideas you may have. Thanks for your help guys!

[Redman65]

My guess would be it's cooked. The ESC/Receiver that is. Does the radio light up. I had trouble with my radio when I first got my Mini-T. I had to play around with the battery tray alittle to get the radio to work. If it's not the radio I'd start looking for a good ESC and receiver. You should get both for under $100.

[marinearmenibro]

I was going to buy this (http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXJJG3&P=ML) motor and i was wondering if it would work in my mini-t and if i would have to change the gears. Also will performance be any better than stck motor, i am using this battery (http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXHUJ4&P=7) . thanks in advance.

[Brian23]

battery is good and motor is good.... u migh wanna drop 2 or 3 teeth on the pinion so the little esc dont get overheateed

[NPedeInsanity]

Hey guys

I'm about to buy a mini, and was wondering how this thing holds up to the RC18T. Can it stand up to a good beating? What are some ups and downs?

[rcracer29]

What is the best motor you can run without upgrading the electronics? Just curious.

[SUPERSONIC_ST]

Mini T holds up pretty well against the rc18t. I had a bad start with my mini, got it out the box and one of the rear hub carriers was already broken in half and the dog bone was bent to a 90 degree angle. It must have been poorly transported. Its really a gret car. The only way the RC18T beats the mini t is that it has 4wd.

BTW, I think the trnity Termination batteries are the best cos ya dont even need new electonics.

[magicald]

Hey guys, I have had my Mini-t for about a week now and it is great, except for the electrics...Mine just started having the servo problem that many have had. Anyways, I want to upgrade the electrics...What's the big difference btw AM and FM??? Also, is the stock radio compatible with any aftermarket receivers or is the stock radio junk?? Also, has anyone used the stock mini-lst FM electrics in a mini-t? I'm just trying to convert it the cheapest way possible but with better electrics than stock. Thanks for the help!!

[teampeter]

Hey all! My T is here; http://www.snapfish.com/thumbnailshare/AlbumID=37051346/a=36778460_36778460/t_=36778460
I myself have a Trinity Monster Termination motor and a six cell GP1100 pack, so I think that his ESC/receiver was a fluke, Chichi RC.
Ciao

Pete

[Redman65]

Will the pre-painted Mini-T bodies direct fit to the Mini-T pro kit?

[rcracer29]

Yes, the bodies will fit.

[Redman65]

Yes, the bodies will fit.
I just ordered a few unpainted bodies for $1.99 each. I'll take a stab at painting. lol

[Brian23]

ive been looking into getting the mamba 6800 for my mini t.. i know i need new electronics and servo. Is it worth spending the amount to go fm or is it ok if i stick with am. I know fm is alot better but for the cheapest fm whats the price difference gonna be? also what parts must be upgraded? Bearings, oil shocks i know but is there anything else big i need to get? i was thinkg of a graphite chassis im not sure

[Straick]

I just got one on friday and I love it. Replaced the original motor with a Trinity Monster(strongest one in stock at LHS right now). Ball bearings, the cv axles, new rear tires, metal spur gear, and lipo's so far. For its small size, it sure doesn't lack in power or speed. The one problem that I have is that every time it goes airborne, it just flips and tumbles. How do I make it land right side up and not do as these flips and rolls. It is extremely durable though, thank goodness. Shocks are next on the list.

[teampeter]

Anyone know how to cut the comm on micro motors?! Please help!!!

Hey Straick, I think that the shocks will improve your flight quality. They will keep the truck flat off the jump and it will jump flatter as a consequence.

[Straick]

I'm going to get them later this week. LHS didn't have them when I got everything else.

Also, what do you mean by cut the comm?

[R_C85]

Does anyone know what weight of shock oil is in the mini-t shocks (performance ones from the mini t pro)???

[SUPERSONIC_ST]

I just got one on friday and I love it. Replaced the original motor with a Trinity Monster(strongest one in stock at LHS right now). Ball bearings, the cv axles, new rear tires, metal spur gear, and lipo's so far. For its small size, it sure doesn't lack in power or speed. The one problem that I have is that every time it goes airborne, it just flips and tumbles. How do I make it land right side up and not do as these flips and rolls. It is extremely durable though, thank goodness. Shocks are next on the list.

Which way does it go when it launches of the ground, does it go into a forward or backward spin???

[nitro.monster]

HI what does I must uppgrade on my mini-t when I install a BL system??

Quick answear plz

[Legend_Car]

I would install a ball diff, cvds and a slipper clutch. Also a better steering servo and new radio system. Here is mine. It has a MAMBA, HS81MG servo MX-3 radio graphite chassishttp://i45.photobucket.com/albums/f64/Gumby70/Mini-t.jpg

[Racing t]

pretty sick mini t legend,

[teampeter]

Cutting the comm is where you use a comm lathe to skim some material off the commutator(part where the brushes in the motor contact) so it is perfectly round. I want to know how to do this with a mini motor.

[nitro.monster]

HI what pinion and spure do you use in you'r bl mini-t

[Straick]

It used to spin so that the front hit the ground first. I now got it to land on all 4 or rear. Oil shocks, medium springs on the front, and whatever the ones are that came on the rear.
My testing ground, a construction zone. At least when they aren't working over there. :rolleyes: So far, no real damage to it, but a whole lot of fun. :)

[admiral12r]

i was one of the first people in my area to get a mini-t. i have have countless hours bashin it. at first the front bulkhead would break after a major hit. a alum skid plate fixed that prob. i have up graded many parts, shocks, ball bearing, more alum, team orion big block motor and mount, i have prob gone through 5 sets of tires, and still orig. batt. pack runnin strong. its been drowned, replaced the esc/receiver twice, once from water the other just fried one day. three sport motors until i got the orion motor. i got the parma 50's panel truck body which looks f-in sweet. i would love to put in a momba or rage esc and motor, but my new passion is the lst2 i got a couple weeks ago. so i will leave as is. i have a blast with it, although my cat is very scared when she sees it lol. anyways i like the mini's cause you can run them any time, anywhere. was thinkin bout racin it but the closest track is over 50 miles away. oh well bash away

[Redman65]

Amen

[tmaxx101]

Hey,
I jus goa Mini T and im goin ot the beach this summer. any suggestions on what to get to run it in the sand. Motors, pinion gears, wheels, esc's...

Thanks,
Chris

[tmaxx101]

Hey,

[tmaxx101]

Which is faster? The Chubby Special Ed. or the Orian big block?

Chris

[Brian23]

tmaxx 101- im guessing your mini t is completly stock right now. Here is what i would get for it.

bearings
oil filled shocks
paddle tires for the rear( they hook up well)
wedge tires in the front, (but you could leave the front tires stock the wedge will steer a bit better tho)
you probly dont wanna upgrade your electronics yet because thers a good chance they will get fried at the beach
but a mod motor would probly be needed- such as team orion baja motor , trinity termanation pretty much any will work good
your wana get a metal pinion and drop a tooth or 2
cary an extra spur gear incase you get sand in the gears at the beach and you strip it
And that should be good i think :)

[RS4rally1124]

i agree with everything brian said.... just yeah if at all possably depending on ur fab skills try to mak the body hug the frame as close as possable or creat an underbody

JT

[tmaxx101]

Thanks,
i do have lots of experience with fab. and also with rc. I will try your suggestions. Do you need new connectors for the baja motor??

Chris

[RespirologyRC]

you will need connectors for the baja. But that's easy to take care up as the motor comes with a positive and a negative wire. Just peal away a little plastic and secure it to the esc leads and your set.

[HYPA]

Has anyone tried the Golden Horizons piggy back shocks? I have just ordered a set after having absolutely no luck with the crappy Losi shocks. Also can anyone tell me the best settings to use when charging a new SMC 1200 mAh battery pack with the Duratrax Ice charger?

[bikeguy100k]

Has anyone tried the Golden Horizons piggy back shocks? I have just ordered a set after having absolutely no luck with the crappy Losi shocks. Also can anyone tell me the best settings to use when charging a new SMC 1200 mAh battery pack with the Duratrax Ice charger?

I have a set of those shocks and they work awesome. Mak sure you clean up the pistons really well, there's a bit of left over plastic around the hole and it makes the shocks work like garbage. Once I removed all the stuff from the pistons, they worked great. I used 10wt oil, but I'm not sure because it's been quite a while since I got them.

I have a Duratrax Twin Peak charger and all I can charge my 1100mah battery pack at is 1 amp. Can't be of any help on that one!

Good luck!
Tom

[tmaxx101]

Hey,

[tmaxx101]

Hey,
Im interested in getting some lipo's and a charger and im kinda new to the electric trucks. What do you recommend for batteries and chargers.

Right now im looking at these:
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXHNW5&P=7
and
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LM2182&P=3

Is this okay. Will the batteries fit the charger?

Thanks,
Chris

[tmaxx101]

My Mini t so far::

BAja motor
Golden Hoprizons piggy back shocks
metal pinion set
SAND PADDLES
& SAND WEDGE wheels
bearings

My MINI T is beach ready.

----------------------------------------------------------------------------------
Im still not sure if the combo of lipo's is a good choice. Any of you have any ideas. I already have a package.
Here it is:
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXHNW5&P=7
&
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LM2182&P=3

Will this charger and battery combo work?

Thanks,
Chris

[Straick]

You can charge it at up to 1c the packs rating. Just set the charger for whatever your cell count is and the charge rate at no more the 1c(1.2 amp in your case). I will charge the pack at no more than .5c after a hard discharge for safety. Don't know if it actually is safer, but I haven't had any charge related flares :rolleyes: . Good luck with yours.

Who said that you can't bring aircraft stuff to the cars.

[Straick]

Does anyone have any tips for painting your own body for the MiniT. I want to paint one up like the General Lee from Dukes of Hazard for show. I want something that will stand out around here where all the bodies are stock. That and I like the look of it. Any tips would be appreciated.

[jmcn r]

Well...this is my first time around here, and it is thanks to how great this little Mini T really is!

I got my Mini T way back in Nov 04' and got all of its modifications at the same time, although I waited to install them later (i always do that once i learn the machine totally stock). I got the T and kept it just to run around the place and have some basic fun...didn't want it to get too complicated. Hoped to have some1 else in the area join me but with no RC'ers around that didn't happen. My Mini T only got used lightly from there on in my apartment building on tile and rugs. Still had fun, also went testing speed one day....got a great appreciation for good batteries!

Anyway, I just pulled my Mini T out yesterday an soldered a connection that was coming apart and finally ran it for the first time in months.....for the first time at my home in JA too! i started by cycling up my batteries again and running a couple hours indoors on carpet......all i can say is that it was alot of fun. carpet gave tons of forward bite!

Today........lol.....i pounded that poor Mini T like nobodies business!! That is why I am posting. it seriously is some of the most fun I hadwith an RC in a very long time!! its worth me testifying to it online now! i carved out a little course in my gravel driveway, probably no more than 70x40 (who knows my measurement estimations are usually off). went through 3 charges on two 6 cells and one 5 cell pack! the little Mini T was hooked up going sideways all day!

i have a Trinity Monster wild motor sitting down for it that i didn't use before as stock was good enough in door. i figure i will drop it in now to get down my straight better. first though i have to sort out a couple things.....




#1 My Mini T still has the usual servo "shake" from glitching or some interference, i know the standard radio gear isnt the tops but after all this time is there a quick tweak i can do that keeps with my simply idea of this truck?

#2 More importantly, I have read a number of people talk about a strange squeal from their Mini T. The two general ideas is that its somthing in the tranny solveable by extra grease or RS4 gears. the second is that people says its the stock plastic pinion and spur moving about on each other and they just need to be reset.
This has just developed for me, any of you guys here have any ideas?



Only issue after HOURS of real pushing today was one ball cup pop after side swiping a curb and pebbels that got stock in the front wheels strangely only on the first battery pack. What really could have been trouble was a screw that come loose from the motor plate. This allowed a tiny amount of slack from the motor shaft which warped two washers I had for the slipper. Quick fix this evening when i did a cleanup.


ahhh................yes. thats my report from a great day of RC. a group of people came over (i was supposed to go riding with them) and were impressed with my little track and the lines that were already layed down! they couldnt believe how filthy my little mini was!!!

sorry guys....just extra cheerful right now :p






CLIFF NOTES: jmcn R is super happy with the Mini T after over a year :cool:

[jmcn r]

ROFL....b4 i forget. Here is how my T has been equipped since Jan 05'

Parma Xciter
1/10 scale pan car shocks /25wt
Racers Edge front camber links
Racers Edge Steering knuckles
Racers Edge Servo brace
Racers Edge Front/Rear shock tower
Racers Edge Front Bumper
Trinity Bearing set
Trinity Slipper
Trinity servo Mounts

Stock motor with 2 sets of Trinity VIS Matched 6 cell packs and one set of 5.
I have the trinity Monster Wild motor ready to go in as well, all wires converted to standard Futaba style.....thinking about all Mini Deans when the new motor goes in.

Besides that I just make sure to have a few spares...arms, extra bearings, spur/pinion etc....


and thats my Mini T :D

[jmcn r]

me again :)
i got rid of that noise the other night by playing with the spur and pinion.
ran it for another two hours on Sunday, right at the two hour mark the sound came back but with another one to accompany it and i noticed the Mini T would bog down when i slowed up......looked pretty obvious to me what was happening. slowed it up and tried to coast off but nothing. slipper clutch issues again....

took the truck apart later for an inspection and full cleaning. learned a good amount about the transmission...now i see why the topshaft is a favourite part to change on t he Mini T. greased everything all up and put back together.



Monday, another two hours and again precisely on the two hour mark the sound reappeared! within seconds of it coming back the car also went straight on when i tried to turn. check the linkages, but realised it was my servo.

haven't looked since though, but i have obviously fallen victim of the dreaded servo failure like many other Mini T owners.

oh well, several hours of rough conditions (9 to be exact in only a handful of days!)...thats not bad at all.

going to try get more people to get some minis with me and fix this mini t back up!

[GT Freak]

hoping to get a mini=t this week... :cool:

[admiral12r]

Which is faster? The Chubby Special Ed. or the Orian big block?

Chris

i dont know, but i have the orion, and it is pretty awsome, but you need to get the one that comes with the big block motor mount for the T. its no where near a brushless but for the few bucks you pay its worth it. i would like to know which brushed motor is fastest to, if anyone know fill us in.

[kngsz1219]

What other 1/18th brushless systems are out there besides Castle Creations Mamba and the Tekin Mini Rage that will fit the Mini-T?

[Philly's Finest]

Quark 33 Pro Car esc & AON 4900, Hyperion 5k or 6k, or the new Wraith motor.

http://www.b-p-p.com/products.php?cat=14

[Radio Acer]

I have a few quick questions about the steering on the T. I've noticed that there is a lot of slop in the steering, I'm thinking about getting aluminum bellcranks, steering knuckles and C-hubs to get rid of it. Is the right stuff to buy? And also, Is there any servo (like Airtronics or Hitec) that can replace the stock servo but still use the stock ESC/RX unit?
Thanx everyone.

[montrealer]

I have the aluminum bellcrank and it did not solve the slop problem for me. I think the problem lies in the steering plate's bushing being loose but I'm not certain still. I've been scratching my head for quite a while about this issue and I haven't come up with the solution yet.

[teampeter]

Same. The alu. bell crank doesn't really help, mine ended up being even more sloppy. I just put the stock back in. I think it just has slop by design. To actually elimnate the slop, I think something like Outcast Horizon's chassis or a direct setup would solve it.
Ciao

Pete

[DarkSavage]

Anyone have a Brushless 6800 sytem new they wanna sell? Trying to get my cars all back together for race season :)

[Radio Acer]

dang it, this is the second time i've stripped the servo, and the truck has only run once or twice since the last time i replaced the gears. I didn't even hit anything. I guess i should just replace the entire servo. I am having serious issues with this things steering....
on the other hand, it was really fun to take the truck out of hibernation for the first time this year :)

[DarkSavage]

Well what servo are you running the stock, hs55 or the airtronics one?

[DarkSavage]

Same. The alu. bell crank doesn't really help, mine ended up being even more sloppy. I just put the stock back in. I think it just has slop by design. To actually elimnate the slop, I think something like Outcast Horizon's chassis or a direct setup would solve it.
Ciao

Pete
Yup the Minit comes with slow in the steering. I beleive most of the slop is in the right front tire.

[Radio Acer]

I'm running the stock servo, but i don't want to upgrade because that would mean buying an entire new electronics package, which could run about $100. Not only that, but me n me bro race each other so we want the two mini-t's to be equally equipped. Then I'd be talking buying new electronics for two trucks.
Fortunately the stock servo is cheap, so I'll just buy an entire new one.
And you're right, the slop is mostly in the right front tire.

[DarkSavage]

Believe me its worth it to upgrade that craooy esc/rx thing. The mod servos are so much better and youll be better off in the long run since the stock servo is going to continually break since the motor is weak in them and burn out. so try with a new electronic setup and if your planning on doing that tell me what your going to use so i can tell you if its going to be a good setup or not.

[Radio Acer]

well I was searching around yesterday and I was thinking that I would get the Airtronics servo, some cheap AM receiver like Hitec or Futaba, and then either the Spy Micro ESC or and Airtronics BL Racer. Both of the ESC's are relatively cheap and both are really small.
And thank you for the input everyone.

[DarkSavage]

Alright if your going to race, go with the gt and the spy is good for bashing but some of the new motors will make it go to thermal, the airtronics is a great servo, make sure you get the servo saver will ur buying it''if''.

[Redman65]

Will the Mini-T SURFACE PACK (receiver/ BL-Racer ESC/ micro servo with servo savers) from Airtronics work with the Mini-T RTR radio?

[DarkSavage]

Yes if reciever is am 27 mhz

[DarkSavage]

Does anyone hace any problems with there cvds bending? or twisting?

[Redman65]

Does anyone hace any problems with there cvds bending? or twisting?
I replaced them.... You should to.

[Newdude]

what klind of racing can you do with these cars? I know there's dirt oval but i can't seem to find any tracks with this kind of format...