my car idea should be preety fast

[69dart]

ok here it goes . get a 1/12 scale on road such as lets say a carpetknife and buy a hacker bruhelss system the fastest one they have. and use lipo batts or li ion my carpetknife goes 75 with a 6x2 in it with five cells and i think we could get it to go faster alot faster and since we use brushelss high gearing would not be a problem and as far as bodys go the bodys have alot of down force as it is i dont think that with this set up it would be feesable to reach over 110

[traxxas-dude]

75 on 5 cells...I dont know about all that...was it radar tested?

BTW, what do you think cliff lett did? he used a 1/12, 24 cells, and a brushless motor, Aveox 2 turn acctually.

[69dart]

actuall it was a 1/10 car the on road was a rc10l3
look again
and my car was radared by police and it had the venom speedometer installed to verify and we live on the service drive and i drove next to my dads car to verify and it was true but the batts were hot and so were the motor and i tuned myt motor light springs hi silver brushes and short wires

[TrickSpeed]

sounds almost like what i'm gonna do. HPI mini on 12 cells and brushless, suzuki wagon R body. and a 2 speed.

[Sparkey_STi]

That was basicly my idea. Get the new T1 ( i think thats it... the new 1/12 x ray) and use 7 GP33's with highest volt you can find, 2x3, and drilled chassis with REALLY high gearing... should get past 110 easy...

And It was the TC3... sorry.. cause isnt the l3 1/12th?

[69dart]

they have to versions the tenth scale and the twelf scale cliff used a tenth scale and i am talking about using a carpetnife it is lighter than the exray and less moving parts and the bodys used for carpetknifes are better suited for high speeds

[ElectricThunder]

The 1/12 scale platform by itself is very fast with just a stock motor. Your idea of using lipo cells and a hacker setup might work, but i don't know if it will be the fastest. However, it'll probably give a lot of people a run for their money. The only thing is, if you crash, you're going to have to pick up hundreds of little pieces of chassis.:D

[Maxxcrazy]

drilled chassis

Thats not very smart, the chassis will just rip apart at high speeds. You could drill holes in the aluminum parts, but not plastic ones.

[RespirologyRC]

Dude

[minitdriver]

Ok now I'm stuck on the 6x2 with 5 cells.Cliff lett loaded both cars with a terdload of cells and you guys make his speeds nothing.I don't think a 1x2 could make it past 70 with 5 cells.I'm no speed expert but that seems alittle farfetched.Sure he said cops,dad and venom checked it but c'mon.what cells were they?Not li-po's obviously.Maybe 6000Ni-MH?If thats the case hook me up with some but i do not believe it.
Ken

[LosiXXXS 69]

...I don't think a 1x2 could make it past 70 with 5 cells...

Is it possible to make a 1x2???

[Chris LaPanse]

Sure. It just would have NO torque and crazy top end (and it'd be FRYING the ESC's)