Warrior ESC programming help

[studysession]

Problem -

No matter what I do, I can not program this ESC. I remove orange jumper - wait for beep - move stick into position and no more beeps.

I have used a Futaba 3pk and a cheap stick radio trying to see if makes a difference and it does not.

Programming instructions:
pull off the orange jumper, turn on tx, plug in batteries, wait for beep, full throttle, beep, reverse, double beep, neutral, put jumper back on and power down.

[OpIvy]

BK updated their site, and they have the instructions on there as well.
www.bk-electronics.com

-Nick

[studysession]

There site is nice - Seems like same thing I am already trying to do over all.

[studysession]

Frustrating - No matter what, nothing. After moving throttle after first beep. it is supposed to do second beep but nothing.

[mac0326]

You must remove the red jumper BEFORE you plug in the batteries. All you are doing is reversing the motor rotation.

[tcolesen]

I don't know if you have tried this, or if it will fix the problem, but it worked for me. I had the throttle reversed, so I had to put it to normal, and then it worked. Also, is your exponential as far in each direction as it can go?

[studysession]

I am removing the jumper before plugging in the batteries.

[studysession]

Figured it out. Thanks for the help.

[tcolesen]

What did you do to get it to work?