Where to buy Mamba motors

[ehacker]

My motor burnt out..just wondering where I could get one..thanks

[bomb-proof]

email www.starluckrc.com

[studysession]

I got mine from:
http://www.allerc.com

[^j!nx^]

if your interested, I have a almost new compx motor, the 8000. It only had 2 packs threw is.


Make me an offer.

http://rs-scooby.com/albums/R-C/mini_bomb_021.jpg

[ducati777]

burnt out? Thought the mamba was supposed to be resistant to that sort of thing, what were you running?

[ehacker]

burnt out? Thought the mamba was supposed to be resistant to that sort of thing, what were you running?

nothing last forever...8000 KV too much use maybe

[starluckrc]

Running it on 3 cells?

Best to contact Castle since the motors aren't available seperately. You can also
possibley use a Feigo 20mm can in it's place.

[ehacker]

Running it on 3 cells?

Best to contact Castle since the motors aren't available seperately. You can also
possibley use a Feigo 20mm can in it's place.

Yes....3 cells...ya I checked your site no motor..interested in this 20mm..whats the part number?

Thanks

[ehacker]

Ya..ok..I saw the 200m's..which is the best for the mamba 25 controller running on typical 7.2v

BTW..40.00 is cheap

[starluckrc]

What vehicle? The motors are a direct bolt in on the 18T but need an adpater for the mini-T due to the bearing race on the front and different hole spacing. I run the 130-12L in my 18T for a little extra torque over the Mamba. For only 7.2V, the 130-15S will be the fastest......but you will need pinions with 2.3mm bore for that motor.

[ehacker]

What vehicle? The motors are a direct bolt in on the 18T but need an adpater for the mini-T due to the bearing race on the front and different hole spacing. I run the 130-12L in my 18T for a little extra torque over the Mamba. For only 7.2V, the 130-15S will be the fastest......but you will need pinions with 2.3mm bore for that motor.


Yes the 18T..I'll get my order in..thanks