Moter for U-force75 in 1/10 touring car

[poobee]

Hi,

Could someone reccimend a moter, and some lipos for my 1/10 touring car and u-force 75 esc. Also where can i buy lipos that will fit in my car?

Thanks

[Rtsbasic]

Depends on your budget. A Feigao 380C 6t would work well on 2s lipo such as the Kokam 3200's, or if you have a bit more $$ to spend a Feigao 380C 9t with 3s lipo (works great on 2s - around 13/14t brushed performance, but would scream on 3s). Not sure if a 3s Kokam 3200 fits in, I'm pretty sure a 3s Polyquest 2500XP 20C would, but I'm not sure if you can still buy them anywhere. The motors can be brought from www.starluckrc.com for a really good price.

[SpEEdyBL]

The kokam 3200 3s is a perfect fit btw. I have one in my xxx4.

[TheSteve]

The Kokam 3200 3S is a little tight in a Losi Jrxs - and you need a custom battery door. So if you happen to be using a Jrxs keep that in mind.
A 6 turn with a 2S Kokam would still rock.

[Jev]

Tanic 3650's should fit fine

[poobee]

Thankyou verry much guys, there is no real budjet i have a 380c 7t at the moment, and its kinda slow (with 7.2v budjet 3300ma pack).

I heard Plettenberg is good, but thay make more than 1 moter, im not sure wich moter would be right for me, i would like the most power i can have and 3s lipo or 4s..

These are the moters from Plettenberg:
--------------------------------------
Shadow
Indoor
Extreme
MAXXimum
MAXXimum with fan
BigMAXXimum with fan
Bolido (HP370/50/A1 S Car)
--------------------------------------

I would like something that i can put in a truck some day too.. im thinking the Extreme, but whats the diffrence??

[kufman]

The extreme would be good for a truck and it will run on a 3s. The shadow is wicked fast on 6 cells, but can't run on 3S. The indoor is the same physical size as a shadow, but is slower, may run on 3s I am not sure. The Extreme is a larger motor lengthwise. The Maxxium's are all e-maxx motors. large diameter and long length. I don't know what the Bolido is. Sounds like a bigger motor. The data sheet indicates that it is a high voltage, large motor

http://www.plettenberg-motoren.com/Daten/PDF/Daten/370-50/HP37050A1S.pdf

Here is the page for the car motors

http://www.plettenberg-motoren.com/Daten/HP220car.htm

The indoor 2 is about 4000 rpm/v, 6 pole

The indoor is about 4050 rpm/v, 4 pole

the shadow is about 6280 rpm/v, 4 pole

the extreme is about 4580 rpm/v, 4 pole long can.

The shadow may have a lower rpm/v that the 380c motors, but it can be geared hard since it has a lot of torque.

[Key]

According to Ettienne at Icarerc the indoor model (only) may be discontinued shortly. This isn't confirmed until we directly hear otherwise from the Plett Man.