REVO 3.3 Glow Plug Wire

[smithn50]

I broke my glow plug wire right at the glow plug connector. Is there anything I can do to fix this other than ordering a new wire? If I do have to order, I have to order a whole new harness correct? ( I tried to pull the blue wire out of the harness where the starter connects to see if i can replace just the blue wire, but the wire wouldn't come out). Also will my turck start with a glow plug ignitor?

[NOSC8P]

you can replace the blue glow wire, when you buy the new one it will come with a "slide" that will allow you to remove the broken one and install the new one...also if you want to do away with the glow wire you can use any glow igniter.....i tried this but got tired of lugging both the starter and the glow igniter around....

[crazyjr]

Looks like you need a new wire. I tried to fix one and never got it right. yes an ignitor will work but you need to get one with a long connecter because its a deep head that the 3.3 has

[smithn50]

Thanks for the info...that wire needs to be upgraded or something...not a very good setup with that weak wire...

[zakerid]

you could use this- http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXSP09&P=Z
you will have to crimp a bullet connector to the wire in the truck- http://www.radioshack.com/product/index.jsp?productId=2104095&cp=2032058.2032231.2032283&parentPage=family
or
just get this- http://www2.towerhobbies.com/cgi-bin/wti0095p?FVSEARCH=4581X+&FVPROFIL=++&search3=Go

[smithn50]

Thanks for the research!! I think with everyones help, my truck will be running soon!!