I'm screwed....

[tonyt]

ok, i was adjusting the 2 speed tranny in my MGT when the end of my driver BROKE OFF....IT WAS TI-NITRADE!!!!!

so now i have a 2 speed tranny that is out of wack with one of the screws stuck in due to a broken off driver.

of course i could buy a new one but i'm too cheap for that


NEED HELP!!!

Tony T.

[ericem]

Wait wait wait, SO u turned the screw and ***? OH i see u turn with ur allen key and it broke. Now u need to make them, even dont worry. Just turn the screws all the way in then turn back out. With a new allen key wrench. Also wait for another reply just to be sure.

[travis j]

hmm...well I dont see how you did that,are you sure you didint try the set screw that holds the two speed spur to the shaft/sivler color screw?ae uses alot of red lock tight on stuff and Iv broke of alot of things,e-z outs,hex drivers,allen keys,but if it was the adjusting screw it should have turnd freely,but good luck geting it out.

[ericem]

Ya hes right i remember where i heard about that screw that holds the shaft, and if u loosened it u need to retighten it with locktight and make sure it hit the flat side somehow.

[tonyt]

ok, i turned the screw that was angled first and got it to tighten 1/4th of a turn. the screw that came just before it was the one that it broke of into....it's stuck in there and i think i need to get a new 2 speed clutch.......

(pics comming soon)

Tony T.

[tonyt]

CLICK HERE (C:\Documents and settings\tony\my documents\my pictures\problems\P1010302\)

ok, i can't get this to work......

Tony T. :(

[tonyt]

hmm...well I dont see how you did that,are you sure you didint try the set screw that holds the two speed spur to the shaft/sivler color screw?ae uses alot of red lock tight on stuff and Iv broke of alot of things,e-z outs,hex drivers,allen keys,but if it was the adjusting screw it should have turnd freely,but good luck geting it out.

yea, the screw's silver....... but the manual says that there is a black screw AND a silver screw that you need to adjust equally to set the 2 speed.... :confused:

Tony T.

[travis j]

no no no,the black set screw is the one you want to adjust not the silver.

[travis j]

here ya go,thanks to chevy ss I found this pick

[tonyt]

THERE WE GO!!!

Thanks a TON!!!

(now that i've got it appart....)

this is pretty bad.....the camera is horrible and there's no way the bit is comming out of this.....

(i'm gonna go replace it tommorow...THANKS A TON ONCE AGAIN!)

Tony T.

[travis j]

if you need any kind of help for you mgt give me a pm or post er up the forum and Ill help ya the best I can.
travis

[tonyt]

if you need any kind of help for you mgt give me a pm or post er up the forum and Ill help ya the best I can.
travis

OK. help me with this: what weight of shock fluid is in the stock shocks??? (i need some more of it...)

Tony T.

[travis j]

35 I think

[ericem]

Just remember when refilling to push the shock in and out to release the air, and dont fill right to the top. The shock fluid will burst out if filled right to the top.

[tonyt]

35 I think

thanks, and yes, i know how to fill a shock

Tony T.

[ericem]

Lol making sure hate talking to people like n00bz but it good to double check.

[tonyt]

Lol making sure hate talking to people like n00bz but it good to double check.


yet again, thanks

Tony T.