Debra
10-18-2006, 04:35 PM
Latest from Hobby Lobby:
http://www.modelairplanenews.com/pics/hl2.jpg
Laser cut built-up balsa and plywood construction. The wings are rib and spar construction, completely pre-built and pre-covered. Motor cowl and wheel pants are pre-finished fiberglass. Landing gear is anodized aluminum. Laser cut motor mount is ready for your AXI motor. The correct side and down thrust is already built in. Flight battery is easy to install through the hatch under the nose. A great second airplane with smooth and predictable flying characteristics. Lots of power for short take-offs even from the grass and so light it floats in slowly for easy landings. Very stable with a gentle stall and quick recovery. As easy to fly as a trainer but with enough power to practice more advanced maneuvers. Rolls, loops, inverted, even sustained knife-edge is easily accomplished. Photo-illustrated instructions are clear; assembly time is about 4-6 hours. Flight time is about 8-12 minutes. For 4 channels: Ailerons (2 servos), Elevator, Rudder and Throttle.$168.30
63" wingspan, 43-1/4" long, 744 sq. in. wing area, 57 oz. flying weight. 11 oz. per sq. ft. wing loading.
http://www.modelairplanenews.com/pics/hl2.jpg
Laser cut built-up balsa and plywood construction. The wings are rib and spar construction, completely pre-built and pre-covered. Motor cowl and wheel pants are pre-finished fiberglass. Landing gear is anodized aluminum. Laser cut motor mount is ready for your AXI motor. The correct side and down thrust is already built in. Flight battery is easy to install through the hatch under the nose. A great second airplane with smooth and predictable flying characteristics. Lots of power for short take-offs even from the grass and so light it floats in slowly for easy landings. Very stable with a gentle stall and quick recovery. As easy to fly as a trainer but with enough power to practice more advanced maneuvers. Rolls, loops, inverted, even sustained knife-edge is easily accomplished. Photo-illustrated instructions are clear; assembly time is about 4-6 hours. Flight time is about 8-12 minutes. For 4 channels: Ailerons (2 servos), Elevator, Rudder and Throttle.$168.30
63" wingspan, 43-1/4" long, 744 sq. in. wing area, 57 oz. flying weight. 11 oz. per sq. ft. wing loading.