blade cp not working

[sangoma90]

Today i tried flying my blade cp and it didnt work. i turned on the radio, then plugged the battery into the heli; the light flashed red, then went solid red (its meant to be green). I push up on the throttle, nothing spins, but the blades tilt. I tested the other controls and they worked, but my rotor is just not spinning! I had this problem the first time i tried it, the throttle had to be in the down position to start, which i did, then it worked. but this time, thats not working. can somebody PLEASE help!

thanks

[rocknbil]

This one's probably pretty easy. :D You still have a little "throttle on." Make sure the throttle stick is all the way down AND the throttle trim is all the way down.

This is a safety feature of the 4-in-1's, it won't arm if there's a throttle signal at startup.

[sangoma90]

i tried with the throttle down and trim down and it still doesnt work. what else could it be?

[gainman]

the switch on the top of the control on the right side. make sure its down (away from you if you looking at front of remote)