fiat124
08-29-2007, 02:35 PM
I have a 1/12 4 cell car
And am using a 10T flat liner mooter
Can i use the any turn speed controlor from my 1/8th 7.2v car In my, 1/12 4.8v car> what do you guys use in your 4 cell cars do i need a 4.8v ESC
InspGadgt
08-30-2007, 05:09 PM
You can use an ESC designed for 1/10th or larger that can handle a 10T motor normally. A 1/18th ESC is designed for a much smaller motor. The BEC voltage will still be normal however the draw of a 10T motor may be too much to properly supply the reciever with power so you may need a reciever pack. 10T is a hell of a lot of motor in a 1/12th. If you've never driven pan cars in the past I HIGHLY reccomend you start with a stock motor.
highroller
08-31-2007, 02:22 PM
I replied to a couple of your posts, as well as your PM to me.
Since you are not considering racing, the car is a handful on any unprepared surface. Basically all my pan cars 1/10 or 1/12 tha are used exclusively for racing - my old rc10, tc3 or other transmission cars are run on unprepared surfaces.