problem with airtronics recivers

[GeoVW72]

i'm just curious if anyone has had the same problem with their airtronics recivers that i have. at the moment both of my airtronics recivers do not work. one day they were working fine i would put the car away, i would get it out the next time plug in a charged battery and they do nothing. no busted wires or anythig else i checked. it happened with both of them, one day it worked the next it didn't and hasen't worked since.
any one got an answer?

[rccardude04]

Are you sure it's not the transmitter? Maybe the crystal is popped loose?
-Eric

[GeoVW72]

checked everything in reciver.
i have an m11 and i treat it well, i don't think the crystal came loose
and the first one that went bad, my other one still worked
but now i have no working recivers, life sucks with out r/c

[terrible-t]

Strange that both RX have the same problem at the same time. Reseat the crystals in the RX, TX reseat the crystal in the module by removing 4 small screws on the module and remove the module from the tX reseating it to the module.


If you have a friend with a frequecny checker by Duratrax, he can see it your TX is ok. If you know anybody with a HAM radio he can check the FS(field strength) of your TX. last thing visit your LHS

[Winston]

Plug the battery straight into the RX to check because you could have a switch that's gone faulty.Also check you're not plugging into the charging lead if you have one fitted on the switch.


.

[GeoVW72]

at college and all i have is my electric car. cannot plug battery into reciver
they both didn't go bad a the same time
frist one was in t-maxx, got everything set up and working put it away, got it out the next time nothing worked, put new novac reciver in every thing worked.
losi xxx-t had reciver in for a while, ran it one day nothing really got abused or anything, put it away, got it out next day plugged in a new battery nothing worked, thought it was a bad wire so i replaced that and it still didn't work