ST Racing Concepts Option Parts for Traxxas Slash, Bandit, Stampede and Rustler

[News]

New from ST Racing Concepts (http://www.teamstrc.com/):

http://i344.photobucket.com/albums/p347/rccanews/ST5837.jpg


Machined from high quality aluminum, our new Traxxas Slash Front Skid plate offers great strength to the front end of your Traxxas Slash and adds solid protection to the steering assembly. Comes complete with aluminum steering posts, this aluminum front skid plate also adds great realism to your Traxxas Slash truck in resembling their full-size counterparts. Complete the setup with our already available Slash/Stampede Rear Skid Plate as well (ST3623R) Available in red, silver, and blue anodizing.

ST5837B/R/S: ST Racing Concepts CNC Machined Aluminum Front Skid Plate set (w/steering posts) for Traxxas Slash

MSRP: $25.99

http://i344.photobucket.com/albums/p347/rccanews/ST3677.jpg

CNC Machined from high grade aluminum, our rear aluminum motor guard adds extra protection around the motor area and provides more strength to the rear of your Traxxas vehicle, while enhancing the looks as well. Works with Traxxas Slash, Rustler VXL and Bandit VXL. Anodized in red, silver and blue.

ST3677B/R/S: ST Racing Concepts CNC Machined Aluminum Rear Motor Guard for Traxxas Slash, VXL Bandit, VXL Rustler

MSRP: $28.99

http://i344.photobucket.com/albums/p347/rccanews/ST2555.jpg

CNC Machined from high grade aluminum material, these aluminum Rear A-arms are made specifically for the Traxxas Slash. Aluminum A-Arms adds great strength to the rear suspension of your Traxxas Slash, and when combined with our aluminum front A-arms (ST3631) it provides a bullet proof setup for your Traxxas Slash. For smooth suspension operation, the hinge-pin holes are fitted with machined delrin inserts. Each set of A-arms also comes with high-grade steel hinge-pin set w/e-clips. Solid in design and construction. (1 pair) Anodized in Red, Silver, and Blue

ST2555B/R/S: ST Racing Concepts CNC Machined Aluminum Rear A-Arm set (w/steel hinge-pins) for Traxxas Slash

MSRP: $34.99 per pair

http://i344.photobucket.com/albums/p347/rccanews/Red_parts_resize.jpg

ST Racing Concepts CNC Machined Aluminum Option Parts for Traxxas Slash, Bandit, Stampede, and Rustler now in anodized red.

Along with our already released red anodized CNC machined aluminum suspension components for the Traxxas Stampede, Rustler, Bandit and the new Slash, we now offer the rest of our option parts line in brilliant red anodizing. You can now hop-up your favorite Traxxas cars or trucks with our complete line of performance option parts in the unique new red anodizing colors that really set your vehicle apart from others, while matching well with the Traxxas black/red pre-painted paint scheme on their bodies.

ST3632R CNC Machined Aluminum Caster Blocks: $15.99
ST3636R CNC Machined Aluminum Steering Knuckles w/oversized bearings: $19.99
ST3652R CNC Machined Aluminum Rear Hub Carriers w/oversized bearings: $19.99
ST3638R CNC Machined Aluminum Rear Shock Towers: $23.99
ST3639R CNC Machined Aluminum Front Shock Towers: $19.99
ST2735R CNC Machined Aluminum Oversized front bumper: $12.99
ST2530R CNC Machined Aluminum Front Bulkhead: $25.99
ST3623FR CNC Machined Aluminum Front Skid Plate (Stampede only): $19.99
ST3623RR CNC Machined Aluminum Rear Skid Plate (Stampede/Slash) $16.99
ST3743XR CNC Machined Aluminum Steering Bellcrank (w/bearings): $32.99
ST3654-12R CNC Machined Alum. Hex Adapters (4 pcs) $13.99
ST3631R CNC Machined Aluminum Front A-Arm Set (Stampede/Rustler/Slash): $32.99
ST3655R CNC Machined Alum. Rear A-Arm Set (Stampede/Rustler) $34.99
ST2555R CNC Machined Alum. Rear A-Arm Set (Slash only) $34.99
ST3677R CNC Machined Alum. Rear Motor Guard (Slash/VXL Bandit, Rustler): $28.99
ST5837R CNC Machined Alum. Front Skid Plate w/steering posts (Slash Only): $25.99

[rccardude04]

EEEEEEEEEEE!!!!!!!! A WHEELIE BAR MOUNT!!!!

lol, seriously. The arms are top quality, and it's nice to see a bit of color options out there from STRC.

Good stuff.

I might have to pick up the motor guard/wheely bar mount for my Pede. :D

-Eric

[wishingfortlt1]

nice strong stuff, but for as much abuse as my slash takes, the parts will make the truck ugly as they will get totally jacked up within the first few runs.....

great for a show queen

[MikeWest]

I'm with you on high-werar items like the skidplates, but when I get a Slash, I MUST have those shock towers. That's the beauty of a $200 truck--it's a lot easier to spend extra on upgrades!

[rccardude04]

I got a lot of the stuff for my Pede, and like Mike said, the shock towers are almost a must. The bulkhead, carriers, and caster blocks are also nearly necessary!

Skid plates I kind of wish I had not gotten, but they look decent anyway. They tend to bend a bit on my truck though... :D

-Eric

[teamstrc]

nice strong stuff, but for as much abuse as my slash takes, the parts will make the truck ugly as they will get totally jacked up within the first few runs.....

great for a show queen

Thank you for your compliment. If you're concerned about scratching up the parts, we highly recommend the silver clear anodized parts (silver hides the scratches really well in our testing) :D

Thanks

Steve Wang

[teamstrc]

I'm with you on high-werar items like the skidplates, but when I get a Slash, I MUST have those shock towers. That's the beauty of a $200 truck--it's a lot easier to spend extra on upgrades!

Shock towers works really well in reducing the amount of twist and flex the stock plastic pieces have (you can try once you receive your car and twist the shock towers) and that will also help keep the shocks in place and not twist off the shock cap which some of the Slash owners have been experiencing, which might be due to the shock tower twisting in so many ways.

Steve Wang

[MikeWest]

How great is it when the actual maker pops up on the board? Gotta respect that. Steve, we need to see shots of this stuff installed!

[teamstrc]

How great is it when the actual maker pops up on the board? Gotta respect that. Steve, we need to see shots of this stuff installed!

Hi Mike,

Thank you for the welcome. I actually enjoy visiting all the forums and msg boards and interacting with the customers (although sometimes I simply can't find enough time to do it), it has really helped us make better products.

I'm working on some shots of the parts installed on the truck, and will probably post them on our website's gallery soon.

Steve Wang