News
09-02-2008, 09:49 PM
81896
New from Axial (http://www.axialracing.com):
If your driving style prefers a narrower chassis with just the right amount of suspension travel to maintain stability on any terrain, then you will demand the Bender Customs SWX. The SWX is the 4th generation of several years of chassis research and development.
Narrow chassis for squeezing through tight gaps
The originator of the "open sided motor plate".
Delrin skid plate wraps under the side plates to help you slide over the rocks better
Skid plate has a directional channel down the center to help prevent lateral slides when on the rocks
Counter sunk screws help prevent hang ups
Thick 3mm aluminum side plates provide a rigid chassis
Includes grey anodized links and bolts directly to any AX10 Scorpion
Complete easy to follow instructions makes it easy for anyone to install and setup
Allows the use of most transmissions and dig units currently on the market
AX30506 - Axial Bender Customs SWX Chassis Kit - $120.00
AX30505 - Axial Bender Customs SWX Chassis Plates - $50.00
AX30504 - Axial Bender Customs SW Series Skid Plate - $28.00
AX30475 - Threaded Aluminum Pipe 6x74.5mm - Green (2pcs) - $9.25
AX30476 - Threaded Aluminum Pipe 6x74.5mm - Red (2pcs) - $9.25
AX30477 - Threaded Aluminum Pipe 6x74.5mm - Blue (2pcs) - $9.25
AX30478 - Threaded Aluminum Pipe 6x74.5mm - Orange (2pcs) - $9.25
AX30479 - Threaded Aluminum Pipe 6x74.5mm - Grey (2pcs) - $9.25
AXA1413 - 1x6mm Spacer - Grey (6pcs) - $6.25
AXA1415 - 3x6mm Spacer - Grey (6pcs) - $6.25
AXA1416 - 4x6mm Spacer - Grey (6pcs) - $6.25
AXA1427 - 7x50mm Post - Grey (2pcs) - $6.75
AXA1429 - 7x60mm Post - Grey (2pcs) - $8.00
AXA149 - M3x20mm Hex Socket Flat Head - Black (10pcs) - $2.50
AXA146 - M3x12mm Hex Socket Flat Head - Black (10pcs) - $2.50
AXA896 - M3x12mm Tapping Flat Head (Black) (10pcs) - $2.50
81895
81897
81898
New from Axial (http://www.axialracing.com):
If your driving style prefers a narrower chassis with just the right amount of suspension travel to maintain stability on any terrain, then you will demand the Bender Customs SWX. The SWX is the 4th generation of several years of chassis research and development.
Narrow chassis for squeezing through tight gaps
The originator of the "open sided motor plate".
Delrin skid plate wraps under the side plates to help you slide over the rocks better
Skid plate has a directional channel down the center to help prevent lateral slides when on the rocks
Counter sunk screws help prevent hang ups
Thick 3mm aluminum side plates provide a rigid chassis
Includes grey anodized links and bolts directly to any AX10 Scorpion
Complete easy to follow instructions makes it easy for anyone to install and setup
Allows the use of most transmissions and dig units currently on the market
AX30506 - Axial Bender Customs SWX Chassis Kit - $120.00
AX30505 - Axial Bender Customs SWX Chassis Plates - $50.00
AX30504 - Axial Bender Customs SW Series Skid Plate - $28.00
AX30475 - Threaded Aluminum Pipe 6x74.5mm - Green (2pcs) - $9.25
AX30476 - Threaded Aluminum Pipe 6x74.5mm - Red (2pcs) - $9.25
AX30477 - Threaded Aluminum Pipe 6x74.5mm - Blue (2pcs) - $9.25
AX30478 - Threaded Aluminum Pipe 6x74.5mm - Orange (2pcs) - $9.25
AX30479 - Threaded Aluminum Pipe 6x74.5mm - Grey (2pcs) - $9.25
AXA1413 - 1x6mm Spacer - Grey (6pcs) - $6.25
AXA1415 - 3x6mm Spacer - Grey (6pcs) - $6.25
AXA1416 - 4x6mm Spacer - Grey (6pcs) - $6.25
AXA1427 - 7x50mm Post - Grey (2pcs) - $6.75
AXA1429 - 7x60mm Post - Grey (2pcs) - $8.00
AXA149 - M3x20mm Hex Socket Flat Head - Black (10pcs) - $2.50
AXA146 - M3x12mm Hex Socket Flat Head - Black (10pcs) - $2.50
AXA896 - M3x12mm Tapping Flat Head (Black) (10pcs) - $2.50
81895
81897
81898