News
09-03-2008, 10:25 AM
Latest from Tamiya (http://www.tamiya.com/):
http://i344.photobucket.com/albums/p347/rccanews/sherman.jpg
The M4 Sherman Tank was the most used tank during WWII by the American Army. The M4A3 came armed with a 75mm gun and approximately 3071 tanks were produced. They saw fierce action at Normandy, and also served throughout the Pacific through to the end of the war.
About the Model
4 channel transmitter included.
Moves forward/reverse, sharp turning, pivot turning, gun turret rotates, gun barrel can be elevated and depressed.
Pre-assembled belt type tracks.
Compact gearboxes and motors drive the tank.
One compact unit controls both turret rotation and gun elevation.
The gearboxes and the all-in-one turret rotation and gun elevation unit are pre-assembled.
Two standard buttons are also equipped for extra channel use.
Uses four R03/AAA/UM4 alkaline batteries and one 006(9V)/6F22 alkaline battery for transmitter.
Equipped die-cast tension shaft allows you to adjust the tension of the tracks.
48207 1/35 R/C M4A3 Sherman Tank (w/4ch Transmitter)
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/NISMOGT-R.jpg
2008 saw the end of the Nissan 350Z and the debut of the rear wheel drive No.23 Nissan Xanavi NISMO GT-R/VK45DE at the Super GT, which is driven by team drivers Satoshi Motoyama and Benoit Treluyer. The GT-R has a 4,494cc sized motor which thumps out in excess of 500ps roar power. On its debut the No.23 Xanavi GT-R won and team Motul Autech GT-R came second for a well earned one-two finish, and continued its winning ways at the second round with the Xanavi recording back to back wins.
About the Model
New TB-03 chassis follows in the footsteps of the TB-02.
Bathtub frame comes with a motor cooling duct to improve heat dissipation for better performance.
In-board Front Suspension system features horizontally-mounted front dampers to enable a low-nose profile to mount the new-mold aerodynamic polycarbonate body shell. (Body shell is also compatible with TA05-IFS chassis)
Newly-designed one-piece aluminum motor mount makes changing and adjusting gears a breeze.
Equipped with front and rear ball differentials for greater power transmission efficiency.
Race-proven reversible short suspension and TRF416 front and rear knuckles.
PS2 Red, PS23 Gun Metal, PS48 Semi-Gloss Silver Anodized Aluminum, PC-5 Black colors are separately required to recreate the race car’s livery.
Includes body, narrow 6-spoke wheels, racing slick tires, and Type 540 motor.
2-channel R/C system, 7.2V battery and charger separately required.
58412 1/10 R/C 4WD High Performance Racing Car Xanavi NISMO GT-R (R35) (TB-03 Chassis)
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/lambo.jpg
At the 1971 Geneva Motor Show, the Lamborghini Countach prototype was put on show. Three years later in 1974, Lamborghini released the first LP400 model Countach with the LP400S the LP500S models soon following. At the 1982 Geneva Motor Show both the LP400S and LP500S prototypes were showing off their overhanging front and rear fenders and a rear wing option. In 1985, approximately 320 of these vehicles sporting a new 4754cc motor replacing the previous 3929cc motor were manufactured.
About the Model
New polycarbonate body captures the beautiful form of the Countach.
Mirror, rear wing, and metal plated light case are separately-molded parts.
Head lights are in the down position (Can not pop up)
Type 540 motor installed on the impressive shaft-driven 4WD TT-01 (Type-E)
Improved steering linkage design features TA05 steering posts for sharper steering response.
Short wheel base (251mm), Rear wide tread (Uses long wheel axle).
Countach LP500S (TT-01E) wheels. Front offset [+2] Rear offset [+4].
Racing Slicks (Item 50419) provide excellent traction for high speed racing.
LED Lights: Fog lights (5mm white) x 2, Taillights (5mm Red) x 2 are included.
Both front & rear light cases have two 5mm and four 3mm LED Light installation points.
2-channel R/C system, 7.2V battery and charger separately required.
Wide variety of Option Parts are separately available to customize your machine.
58413 1/10 R/C 4WD High Performance Racing Car Lamborghini countach LP500S (TT-01 Type-E Chassis)
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/toyyotatundra.jpg
http://i344.photobucket.com/albums/p347/rccanews/toyyotatundrahighlift.jpg
In February 2007, after a full model change, Toyota released a full-sized American pick-up truck. It was the first time in Toyota’s history that an “All American Made” pick-up truck was sold. With the rising crude oil prices and the increasing demand for economical Japanese cars, the sales of the Tundra in the Pick-Up truck market was quite strong. This model precisely shows off the Tundra’s modern looks and its great ability to take on any terrain with its excellent drive system. Tamiya’s truck model of the Tundra comes as an accurately reproduced Double Cab version. Furthermore, this model Tundra comes with option parts allowing the user to raise the body in the same manner as the actual pick-up truck.
About the Model
The durable ladder frame chassis features steel channels and resin cross members for high strength.
Accurately replicating the Tundra’s suspension system are metal leaf springs, and coil springs with metal friction dampers.
Equipped amidships for a lower center of gravity is a 3-speed transmission allowing gear changing and realistic low speed driving.
Propeller shafts and slipper clutch efficiently transfer power to all wheels on any type of terrain.
Powered by a type 540 motor. (included)
The full-time 4WD guarantees road hugging performance.
The differential can be locked in place to enable improved performancing on any surface it may face.
The newly designed chrome plated wheels with bead lock rings precisely catch the essence of the Pick-up truck. Because the Tundra is fitted with similar side-block tires like the F-350 (58397), it is possible to change them with any other cross country tires.
4-Channel transmitter, ESC, and running battery & charger are separately available.
Loading the separately available Pick-Up Truck Multi-Function Unit (Item 53957) MFC-02 will further enhance the truck and put a wide range of realistic light, sound, and vibration effects at your fingertips.
For dressing-up the model, snow boards (2) and roof racks are included.
58415 1/10 R/C Toyota Tundra Highlift
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/risingfighter.jpg
The all terrain 2WD Rising Fighter inherits all its great qualities and excellent performance from its predecessors The Hornet (Item 58336) and The Grasshopper (Item 58346) and also uses a similar body to that of other fighter series R/C cars.
About the Model
Length: 418mm, Width: 236mm, Height: 187mm, Wheel base: 268mm, Weight: 1000g.
Independent swing axles for the front suspension, a rolling rigid rear suspension, and large sized friction dampers effectively absorb shocks and bumps.
Bevel type diff gear.
Semi monocoque structure acts as the chassis strengthening part (Screws are used to secure the resin body to the bathtub chassis).
Fully enclosed gearbox preventing dirt and debris from interfering with operation.
Powered by a 540 motor (included).
Grooved front tires and rear spike tires ensure excellent traction for any surface.
Stylish resin molded body.
ESC included.
Running 7.2V battery & charger and Expec 2-channel R/C system separately required.
58416 1/10 Rising Fighter
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/XBGT-R.jpg
The aerodynamic form of the beautiful Nissan GT-R has been precisely reproduced with its lightweight polycarbonate body being mounted on the equally impressive TT-01 Type- E chassis. LED lights depict realistic head and tail lights.
About the Model
The lightweight polycarbonate body precisely captures the beautiful lines of the GT-R
Racing Slicks (Item 50419) provide excellent traction for high speed racing.
Stylish Nissan GT-R Wheels accurately reproduced.
Type 540 motor installed on the impressive shaft-driven 4WD TT-01Type-E chassis.
Improved steering linkage design features TA05 steering posts for sharper steering response.
Equipped with LED Light Unit TLU-01. *It is possible to assemble with LED Light Control
Unit TLU-02 (sold separately).
2 white and 2 red 5mm LED lights (total 4) are included.
Both front & rear light cases have two 5mm and four 3mm LED Light installation points.
Comes in PS-23 Gun Metal color.
ESC and Expec 2-channel R/C system included.
Running 7.2V battery & charger separately required.
Wide variety of Option Parts are separately available to customize your machine.
57779 1/10 XB Nissan GT-R (TT-01 Type-E Chassis)
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/risingfighter.jpg
This all terrain 2WD XB Ready-to-Run Rising Fighter inherits all its great qualities and excellent performance from its predecessors The Hornet (Item 58336) and The Grasshopper (Item 58346) and also uses a similar body of that to other fighter series R/C cars. All you need is eight R6/AA/UM3 batteries (sold separately) for your transmitter and a 7.2V battery for your car and then you are good to go!
About the Model
Length: 418mm, Width: 236mm, Height: 187mm, Wheel base: 268mm, Weight: 1000g.
Independent swing axles for the front suspension, a rolling rigid rear suspension, and large sized friction dampers effectively absorb shocks and bumps.
Bevel type diff gear.
Semi monocoque structure acts as the chassis strengthening part (Screws are used to secure the resin body to the bathtub chassis).
Fully enclosed gearbox preventing dirt and debris from interfering from operation.
Powered by a 540 motor. (included)
Grooved front tires and rear spike tires ensure excellent traction for any surface.
Stylish resin molded body.
ESC and Expec 2-channel R/C system included.
Running 7.2V battery & charger separately required
57781 R/C XB Rising Fighter
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/motormount.jpg
This high precision motor mount assists in the decreasing of power loss. Compared with other normal motor mounts it has a wider heat sink gap, it is lighter (Normal Motor Mount 33.5g, DB01 Motor Mount 29.0g) and is more heat resistant. Can be used with all DB-01 chassis vehicles.
54079 DB01 Aluminum Motor Mount (Blue)
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/heatsink.jpg
This is a heat sink for longitudinally mounted motors. When attached to a motor, both heat resistance and motor efficiency improves and it also limits performance deterioration. Can be used with all TB-03 chassis vehicles. It can also be used with the Evo5MS chassis, but care must be taken regarding clearance between the pinion gear and upper deck.
54093 TB-03 Aluminum Heat Sink
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/aluspurgearmount.jpg
This Aluminum Spur Gear Mount can be exchanged with the standard TB-03 kit K6 (Spur Gear Mount) parts. When installed, it raises the propeller joint (B) efficiency and improves rigidity, which helps to minimize friction loss. Can be used with all TB-03 chassis vehicles.
54094 TB-03 Aluminum Spur Gear Mount
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/alusteerset.jpg
This set can be exchanged with the standard TB-03 kit K2 and K3 steering arm parts and the steering arm has 850 ball bearing. When installed, rigidity improves and offers the ball bearings more support, thereby raising overall driving stability and steering performance.
Can be used with all TB-03 chassis vehicles.
About the Set
New TB-03 Steering Arm (L) x 1
New TB-03 Steering Arm (R) x 1
5.5x1.0mm Spacer x 2
5.5x2.5mm Spacer x 1
5.5x3.0mm Spacer x 1
5mm Ball Connector Nut x 1
5mm Ball Connector x 2
TA05 Steering Post (Alu.) x 2
3x16mm Screw x 1
3x16mm Hex Screw x 1
Can be used with item 54097.
54095 TB-03 Aluminum Racing Steering Set
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/carbonsteerlink.jpg
These parts improve the steering linkage rigidity, driving stability, and steering performance, and can be used in replace of the standard TB-03 kit K8 steering link parts. Can be used with all TB-03 chassis vehicles.
54097 TB-03 Carbon Steering Link
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/carbonaparts.jpg
These A Parts can be used in place of the standard A Parts that come with any TB-03 vehicle. Comparing these new parts with the standard fiber glass resin parts they are lighter and more rigid. Drive efficiency improves due to the greater rigidity of the gear case, and installable parts such as the rocker arms and dampers.
54098 TB-03 Carbon Reinforced A Parts (Gear Case)
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/sherman.jpg
The M4 Sherman Tank was the most used tank during WWII by the American Army. The M4A3 came armed with a 75mm gun and approximately 3071 tanks were produced. They saw fierce action at Normandy, and also served throughout the Pacific through to the end of the war.
About the Model
4 channel transmitter included.
Moves forward/reverse, sharp turning, pivot turning, gun turret rotates, gun barrel can be elevated and depressed.
Pre-assembled belt type tracks.
Compact gearboxes and motors drive the tank.
One compact unit controls both turret rotation and gun elevation.
The gearboxes and the all-in-one turret rotation and gun elevation unit are pre-assembled.
Two standard buttons are also equipped for extra channel use.
Uses four R03/AAA/UM4 alkaline batteries and one 006(9V)/6F22 alkaline battery for transmitter.
Equipped die-cast tension shaft allows you to adjust the tension of the tracks.
48207 1/35 R/C M4A3 Sherman Tank (w/4ch Transmitter)
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/NISMOGT-R.jpg
2008 saw the end of the Nissan 350Z and the debut of the rear wheel drive No.23 Nissan Xanavi NISMO GT-R/VK45DE at the Super GT, which is driven by team drivers Satoshi Motoyama and Benoit Treluyer. The GT-R has a 4,494cc sized motor which thumps out in excess of 500ps roar power. On its debut the No.23 Xanavi GT-R won and team Motul Autech GT-R came second for a well earned one-two finish, and continued its winning ways at the second round with the Xanavi recording back to back wins.
About the Model
New TB-03 chassis follows in the footsteps of the TB-02.
Bathtub frame comes with a motor cooling duct to improve heat dissipation for better performance.
In-board Front Suspension system features horizontally-mounted front dampers to enable a low-nose profile to mount the new-mold aerodynamic polycarbonate body shell. (Body shell is also compatible with TA05-IFS chassis)
Newly-designed one-piece aluminum motor mount makes changing and adjusting gears a breeze.
Equipped with front and rear ball differentials for greater power transmission efficiency.
Race-proven reversible short suspension and TRF416 front and rear knuckles.
PS2 Red, PS23 Gun Metal, PS48 Semi-Gloss Silver Anodized Aluminum, PC-5 Black colors are separately required to recreate the race car’s livery.
Includes body, narrow 6-spoke wheels, racing slick tires, and Type 540 motor.
2-channel R/C system, 7.2V battery and charger separately required.
58412 1/10 R/C 4WD High Performance Racing Car Xanavi NISMO GT-R (R35) (TB-03 Chassis)
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/lambo.jpg
At the 1971 Geneva Motor Show, the Lamborghini Countach prototype was put on show. Three years later in 1974, Lamborghini released the first LP400 model Countach with the LP400S the LP500S models soon following. At the 1982 Geneva Motor Show both the LP400S and LP500S prototypes were showing off their overhanging front and rear fenders and a rear wing option. In 1985, approximately 320 of these vehicles sporting a new 4754cc motor replacing the previous 3929cc motor were manufactured.
About the Model
New polycarbonate body captures the beautiful form of the Countach.
Mirror, rear wing, and metal plated light case are separately-molded parts.
Head lights are in the down position (Can not pop up)
Type 540 motor installed on the impressive shaft-driven 4WD TT-01 (Type-E)
Improved steering linkage design features TA05 steering posts for sharper steering response.
Short wheel base (251mm), Rear wide tread (Uses long wheel axle).
Countach LP500S (TT-01E) wheels. Front offset [+2] Rear offset [+4].
Racing Slicks (Item 50419) provide excellent traction for high speed racing.
LED Lights: Fog lights (5mm white) x 2, Taillights (5mm Red) x 2 are included.
Both front & rear light cases have two 5mm and four 3mm LED Light installation points.
2-channel R/C system, 7.2V battery and charger separately required.
Wide variety of Option Parts are separately available to customize your machine.
58413 1/10 R/C 4WD High Performance Racing Car Lamborghini countach LP500S (TT-01 Type-E Chassis)
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/toyyotatundra.jpg
http://i344.photobucket.com/albums/p347/rccanews/toyyotatundrahighlift.jpg
In February 2007, after a full model change, Toyota released a full-sized American pick-up truck. It was the first time in Toyota’s history that an “All American Made” pick-up truck was sold. With the rising crude oil prices and the increasing demand for economical Japanese cars, the sales of the Tundra in the Pick-Up truck market was quite strong. This model precisely shows off the Tundra’s modern looks and its great ability to take on any terrain with its excellent drive system. Tamiya’s truck model of the Tundra comes as an accurately reproduced Double Cab version. Furthermore, this model Tundra comes with option parts allowing the user to raise the body in the same manner as the actual pick-up truck.
About the Model
The durable ladder frame chassis features steel channels and resin cross members for high strength.
Accurately replicating the Tundra’s suspension system are metal leaf springs, and coil springs with metal friction dampers.
Equipped amidships for a lower center of gravity is a 3-speed transmission allowing gear changing and realistic low speed driving.
Propeller shafts and slipper clutch efficiently transfer power to all wheels on any type of terrain.
Powered by a type 540 motor. (included)
The full-time 4WD guarantees road hugging performance.
The differential can be locked in place to enable improved performancing on any surface it may face.
The newly designed chrome plated wheels with bead lock rings precisely catch the essence of the Pick-up truck. Because the Tundra is fitted with similar side-block tires like the F-350 (58397), it is possible to change them with any other cross country tires.
4-Channel transmitter, ESC, and running battery & charger are separately available.
Loading the separately available Pick-Up Truck Multi-Function Unit (Item 53957) MFC-02 will further enhance the truck and put a wide range of realistic light, sound, and vibration effects at your fingertips.
For dressing-up the model, snow boards (2) and roof racks are included.
58415 1/10 R/C Toyota Tundra Highlift
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/risingfighter.jpg
The all terrain 2WD Rising Fighter inherits all its great qualities and excellent performance from its predecessors The Hornet (Item 58336) and The Grasshopper (Item 58346) and also uses a similar body to that of other fighter series R/C cars.
About the Model
Length: 418mm, Width: 236mm, Height: 187mm, Wheel base: 268mm, Weight: 1000g.
Independent swing axles for the front suspension, a rolling rigid rear suspension, and large sized friction dampers effectively absorb shocks and bumps.
Bevel type diff gear.
Semi monocoque structure acts as the chassis strengthening part (Screws are used to secure the resin body to the bathtub chassis).
Fully enclosed gearbox preventing dirt and debris from interfering with operation.
Powered by a 540 motor (included).
Grooved front tires and rear spike tires ensure excellent traction for any surface.
Stylish resin molded body.
ESC included.
Running 7.2V battery & charger and Expec 2-channel R/C system separately required.
58416 1/10 Rising Fighter
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/XBGT-R.jpg
The aerodynamic form of the beautiful Nissan GT-R has been precisely reproduced with its lightweight polycarbonate body being mounted on the equally impressive TT-01 Type- E chassis. LED lights depict realistic head and tail lights.
About the Model
The lightweight polycarbonate body precisely captures the beautiful lines of the GT-R
Racing Slicks (Item 50419) provide excellent traction for high speed racing.
Stylish Nissan GT-R Wheels accurately reproduced.
Type 540 motor installed on the impressive shaft-driven 4WD TT-01Type-E chassis.
Improved steering linkage design features TA05 steering posts for sharper steering response.
Equipped with LED Light Unit TLU-01. *It is possible to assemble with LED Light Control
Unit TLU-02 (sold separately).
2 white and 2 red 5mm LED lights (total 4) are included.
Both front & rear light cases have two 5mm and four 3mm LED Light installation points.
Comes in PS-23 Gun Metal color.
ESC and Expec 2-channel R/C system included.
Running 7.2V battery & charger separately required.
Wide variety of Option Parts are separately available to customize your machine.
57779 1/10 XB Nissan GT-R (TT-01 Type-E Chassis)
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/risingfighter.jpg
This all terrain 2WD XB Ready-to-Run Rising Fighter inherits all its great qualities and excellent performance from its predecessors The Hornet (Item 58336) and The Grasshopper (Item 58346) and also uses a similar body of that to other fighter series R/C cars. All you need is eight R6/AA/UM3 batteries (sold separately) for your transmitter and a 7.2V battery for your car and then you are good to go!
About the Model
Length: 418mm, Width: 236mm, Height: 187mm, Wheel base: 268mm, Weight: 1000g.
Independent swing axles for the front suspension, a rolling rigid rear suspension, and large sized friction dampers effectively absorb shocks and bumps.
Bevel type diff gear.
Semi monocoque structure acts as the chassis strengthening part (Screws are used to secure the resin body to the bathtub chassis).
Fully enclosed gearbox preventing dirt and debris from interfering from operation.
Powered by a 540 motor. (included)
Grooved front tires and rear spike tires ensure excellent traction for any surface.
Stylish resin molded body.
ESC and Expec 2-channel R/C system included.
Running 7.2V battery & charger separately required
57781 R/C XB Rising Fighter
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/motormount.jpg
This high precision motor mount assists in the decreasing of power loss. Compared with other normal motor mounts it has a wider heat sink gap, it is lighter (Normal Motor Mount 33.5g, DB01 Motor Mount 29.0g) and is more heat resistant. Can be used with all DB-01 chassis vehicles.
54079 DB01 Aluminum Motor Mount (Blue)
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/heatsink.jpg
This is a heat sink for longitudinally mounted motors. When attached to a motor, both heat resistance and motor efficiency improves and it also limits performance deterioration. Can be used with all TB-03 chassis vehicles. It can also be used with the Evo5MS chassis, but care must be taken regarding clearance between the pinion gear and upper deck.
54093 TB-03 Aluminum Heat Sink
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/aluspurgearmount.jpg
This Aluminum Spur Gear Mount can be exchanged with the standard TB-03 kit K6 (Spur Gear Mount) parts. When installed, it raises the propeller joint (B) efficiency and improves rigidity, which helps to minimize friction loss. Can be used with all TB-03 chassis vehicles.
54094 TB-03 Aluminum Spur Gear Mount
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/alusteerset.jpg
This set can be exchanged with the standard TB-03 kit K2 and K3 steering arm parts and the steering arm has 850 ball bearing. When installed, rigidity improves and offers the ball bearings more support, thereby raising overall driving stability and steering performance.
Can be used with all TB-03 chassis vehicles.
About the Set
New TB-03 Steering Arm (L) x 1
New TB-03 Steering Arm (R) x 1
5.5x1.0mm Spacer x 2
5.5x2.5mm Spacer x 1
5.5x3.0mm Spacer x 1
5mm Ball Connector Nut x 1
5mm Ball Connector x 2
TA05 Steering Post (Alu.) x 2
3x16mm Screw x 1
3x16mm Hex Screw x 1
Can be used with item 54097.
54095 TB-03 Aluminum Racing Steering Set
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/carbonsteerlink.jpg
These parts improve the steering linkage rigidity, driving stability, and steering performance, and can be used in replace of the standard TB-03 kit K8 steering link parts. Can be used with all TB-03 chassis vehicles.
54097 TB-03 Carbon Steering Link
Availability: October
http://i344.photobucket.com/albums/p347/rccanews/carbonaparts.jpg
These A Parts can be used in place of the standard A Parts that come with any TB-03 vehicle. Comparing these new parts with the standard fiber glass resin parts they are lighter and more rigid. Drive efficiency improves due to the greater rigidity of the gear case, and installable parts such as the rocker arms and dampers.
54098 TB-03 Carbon Reinforced A Parts (Gear Case)
Availability: October