View Full Version : Maryland
fountain 64
10-10-2008, 12:05 PM
Are there any gas/nitro boaters in the Maryland area near Baltimore/ Harford counties.
big boater
10-13-2008, 09:16 AM
hello, i live in edgewood,md thats in harford county. were do you live?
fountain 64
10-13-2008, 02:57 PM
hello, i live in edgewood,md thats in harford county. were do you live?
I live in Baltimore County near the Harford County line. Have you been to Lakeside industrial park yet with your boat? There's a good sized pond in there for the boats, I was there about a week ago.
big boater
10-14-2008, 01:14 PM
I live in Baltimore County near the Harford County line. Have you been to Lakeside industrial park yet with your boat? There's a good sized pond in there for the boats, I was there about a week ago.
no iv never been there were is it?? thanks.
big boater
10-14-2008, 01:19 PM
hello, i sent you a pm.
big boater
10-15-2008, 08:14 AM
hello randy, i forgot to ask what channel are you on?? im running the same radio. i had a lot of fun lastnight at the pond. im working on my cat right now. ill be ready...
fountain 64
10-15-2008, 08:19 AM
hello randy, i forgot to ask what channel are you on?? im running the same radio. i had a lot of fun lastnight at the pond. im working on my cat right now. ill be ready...
When I get home later i'll check the frequency and let you know.
big boater
10-15-2008, 08:23 AM
also here a forum you mite like..www.jrcbd.com
you will have to singn up but you will like it.
big boater
10-15-2008, 12:57 PM
pic..
fountain 64
10-15-2008, 02:26 PM
pic..
Hey Scott ,the cat looks awsome, is she ready to go yet for Sunday. What size is that ?
big boater
10-15-2008, 04:08 PM
its about 42" by 17" wide and its almost ready cant Wait for this weekend. its a styker f41 cat. ill get you a website to look at it.
heres the web site..www.rcboatworks.com
big boater
10-15-2008, 04:09 PM
do you see the hooks on the front thats what i was talking about.
also hers another web sitewww.modelgasboats.com
my name on that site is speed freak.
fountain 64
10-15-2008, 05:53 PM
do you see the hooks on the front thats what i was talking about.
also hers another web sitewww.modelgasboats.com
my name on that site is speed freak.
I see the hooks ,are they chrome or silver, one of those would cool on the Bonzi.
big boater
10-15-2008, 06:01 PM
thay are clear plastic and ill give you one. ill bring it on sunday for ya:wave:
fountain 64
10-16-2008, 08:14 AM
thay are clear plastic and ill give you one. ill bring it on sunday for ya:wave:
The frequency on my radio 75.690.
big boater
10-16-2008, 10:08 AM
The frequency on my radio 75.690.
good mine is 75.590 (ch90). im almost done with the setup:D.
fountain 64
10-16-2008, 06:30 PM
good mine is 75.590 (ch90). im almost done with the setup:D.
Hey Scott ,that water leaking from the hose that cools the head on my motor turned out to be the brass fitting, it's cracked, I need to get another one before Sunday, i'm going to Home Depot to see if they have one.
big boater
10-16-2008, 07:56 PM
were is it cracked at?? you could use jb weld for a temp. fix. i will see if i have one and can have, ill check tomorow.
big boater
10-17-2008, 07:25 PM
I'm ready to go:D i just hope the engine runs? i put this engine together and now has a lot of compression.
fountain 64
10-17-2008, 09:02 PM
I'm ready to go:D i just hope the engine runs? i put this engine together and now has a lot of compression.
Have you tried to start it yet?
What time is good on Sunday?
big boater
10-17-2008, 11:52 PM
Have you tried to start it yet?
What time is good on Sunday?
no have not started it yet, i will when i get there. anytime is good with me. I'm thinking of getting there about 10.00.
big boater
10-17-2008, 11:57 PM
i made an order today with bonzi. i ordered..
cylinder
spark plug
gasket set
piston ring
this way if for some reason this engine will not run i can put my other engine together for next week. also ordered a battery from tower hobbies.
fountain 64
10-18-2008, 08:30 AM
no have not started it yet, i will when i get there. anytime is good with me. I'm thinking of getting there about 10.00.
I'll try to get there around 10:00,maybe a little later.
big boater
10-18-2008, 09:33 AM
that sounds good. im looking forword to running with you, sould be a lot of fun.
dbm0011
01-18-2009, 06:16 AM
Have you guys found the clubs in the area?
www.delmarvamodelboaters.com
Capitol RC Model Boat Club
Springfield, Virginia
www.capitolrc.com
President
Tracy Dolphin
3080 Vidalia Court
Dumfries, VA 22026
703-441-1158
tdolphin@revtekinc.com
Old Dominion Model Boat Association
Chesapeake, Virginia
President
Preston Hall
31331 Community House Drive
Carrsville, VA 23315
757-286-1574
pkhydro@yahoo.com
Piedmont Triad Prop Twisters
Greensboro, North Carolina
http://www.geocities.com/ptproptwisters/
President
Mike Hemric
336-215-9162
mhalflap@bellsouth.net
R/C Model Boaters of Baltimore
Baltimore, Maryland
President
Tim Clark
(301) 984-4005
hydronut@verizon.net
Wilmington Area Model Boaters
Wilmington, North Carolina
http://www.wilmingtonareamodelboaters.com
President
Todd Anderson
905 Marlow Drive
Wilmington, NC 28405
910-232-8046
todd140@hotmail.com
fountain 64
01-18-2009, 04:01 PM
In the spring I want to come to Queenstown and check out the races, where exactly is the club located in Queenstown.
dbm0011
01-19-2009, 10:28 AM
214 Cherry Lane, Queenstown, Maryland 21658
You will need to contact Earl Eber/Mike Hart/ Omro Wiley before you can run there. I think you need to be a club/IMPBA member.
go to the website.... www.delmarvamodelboaters.com
roadkilld
03-10-2009, 09:06 PM
Are there any gas/nitro boaters in the Maryland area near Baltimore/ Harford counties.Hello,I live in Perry Hall,been going to Columbia to run mine,but have been looking for someplace closer.Lakeside appears to be pretty nice-how do you like it?
fountain 64
03-12-2009, 09:52 AM
Hello,I live in Perry Hall,been going to Columbia to run mine,but have been looking for someplace closer.Lakeside appears to be pretty nice-how do you like it?
The place is great and the pond is huge. We usually go on the weekends when nobody is working in the industrial park, that way there won't be any complaints. As soon it warms up we'll be up there, we'll let you know when we're going.
roadkilld
03-13-2009, 04:48 PM
The place is great and the pond is huge. We usually go on the weekends when nobody is working in the industrial park, that way there won't be any complaints. As soon it warms up we'll be up there, we'll let you know when we're going.
Thanx---I'll be waiting!
fountain 64
05-22-2009, 11:26 AM
Thanx---I'll be waiting!
Hey roadkilled, we are going to the pond this weekend if you want go.
roadkilld
05-26-2009, 08:32 PM
Hey roadkilled, we are going to the pond this weekend if you want go.Thanks for getting back to me,I really appreciate it,I was out of town this past weekend doing the camping thing-still haven't been out this year with the toys :( Could you let me know again next time?----Thanx!!!
fountain 64
05-30-2009, 09:23 PM
Thanks for getting back to me,I really appreciate it,I was out of town this past weekend doing the camping thing-still haven't been out this year with the toys :( Could you let me know again next time?----Thanx!!!
We may be going to the pond tommorrow/ Sunday.... i'm still waiting for my friend Scott to get back to me... if he can go we'll be there... i'll let you know for sure in the morning.
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.