Chilly Duncan
12-15-2008, 09:36 AM
83949
New from XRAY (http://www.teamxray.com):
XRAY proudly presents the new ECS drive shaft 52mm, designed with high-level racing in mind. The ECS drive shafts were developed to decrease front wheel vibration when racing with a solid front axle, thus providing a much smoother and quieter ride and increasing steering.
The ECS drive shaft equalizes the speed between the drive shaft and the wheel. With a unique 2-piece joint between the axle and the wheel, the same extreme wheel turning angle is divided into two shallower angles without joint binding. This means that at the same cornering speed, the inner wheel will not bind or vibrate. Drive through the corner is more stable, more precise and easier to drive.
With the new ECS drive shafts, wheel vibrations and noise are decreased to minimum, steering is increased and cornering speed and smoothness increases noticeable.
The ECS drive shaft comes factory pre-assembled for quality checking, but it is not immediately ready to use. Before using follow the instruction manual.
Optional ECS front drive shaft to fit the T2 family of cars
Recommended for use with solid front axle
52mm version specifically for EU edition
Sold in set of 1 drive shaft assembly
The ECS drive shaft minimizes vibration of inner wheel at extreme wheel turning angles
Unique system as used by fuel-size vehicles, scaled down with artisan craftsmanship and attention to the smallest details
Improves cornering speed
Makes car easier to drive, more stable, more precise
Manufactured from world-renowned HUDY Spring SteelTM
High-precision, hand-ground connecting joints have a perfect fit
Each part is inspected and measured to ensure proper tolerasnce and parts matching
Laser engraved for authenticity and symbol of 52mm
NOTE: To use the ECS drive shafts you need to use the front C-hubs V2 with the larger opening. The C-hubs V2 were included in all T2'008 kits, so owners of the T2, T2'007 and T2R must purchase the C-hubs V2 separately.
Part: 305327
Price: TBA
83950
83951
83952
83953
83954
New from XRAY (http://www.teamxray.com):
XRAY proudly presents the new ECS drive shaft 52mm, designed with high-level racing in mind. The ECS drive shafts were developed to decrease front wheel vibration when racing with a solid front axle, thus providing a much smoother and quieter ride and increasing steering.
The ECS drive shaft equalizes the speed between the drive shaft and the wheel. With a unique 2-piece joint between the axle and the wheel, the same extreme wheel turning angle is divided into two shallower angles without joint binding. This means that at the same cornering speed, the inner wheel will not bind or vibrate. Drive through the corner is more stable, more precise and easier to drive.
With the new ECS drive shafts, wheel vibrations and noise are decreased to minimum, steering is increased and cornering speed and smoothness increases noticeable.
The ECS drive shaft comes factory pre-assembled for quality checking, but it is not immediately ready to use. Before using follow the instruction manual.
Optional ECS front drive shaft to fit the T2 family of cars
Recommended for use with solid front axle
52mm version specifically for EU edition
Sold in set of 1 drive shaft assembly
The ECS drive shaft minimizes vibration of inner wheel at extreme wheel turning angles
Unique system as used by fuel-size vehicles, scaled down with artisan craftsmanship and attention to the smallest details
Improves cornering speed
Makes car easier to drive, more stable, more precise
Manufactured from world-renowned HUDY Spring SteelTM
High-precision, hand-ground connecting joints have a perfect fit
Each part is inspected and measured to ensure proper tolerasnce and parts matching
Laser engraved for authenticity and symbol of 52mm
NOTE: To use the ECS drive shafts you need to use the front C-hubs V2 with the larger opening. The C-hubs V2 were included in all T2'008 kits, so owners of the T2, T2'007 and T2R must purchase the C-hubs V2 separately.
Part: 305327
Price: TBA
83950
83951
83952
83953
83954