Chilly Duncan
06-16-2009, 09:20 AM
New from Pro-Line (http://www.prolineracing.com):
87962
Hole Shot VTR 4.0" Off-Road 1:8 Truck Tires (2) for Front or Rear
The 1:8 Truck class has advanced significantly in the past few years from chassis configurations, suspension, drive train technology and other advancements. Wheels and tires are no exception to this and today, Pro-Line introduces the next generation of wheel and tire combination with the VTR line.
Now, the VTR line is just more packs a bigger punch with the Hole Shot tread pattern. The Hole Shot tread is your 2009 The Dirt Nitro Challenge Champion in 1:8 Truck. It’s also been used to capture numerous regional and national events over the past decade. When you’re looking to turn up the heat at a local, regional, or national level, check out the VTR series Hole Shot 1:8 Truck tire.
VTR is already the choice of champions:
2009 Silver State Nitro Challenge Champion
2009 Canadian Indoor Off-Road Shootout Champion – Chad Bradley
2009 JBRL rounds #1 and #2 winner in 1:8 Truck – Ryan Cavalieri
The 2009 Hank Perry 240 Champion in 1:8 Truck – Rick McCrery
2009 Memorial Day Shootout 1:8 Truck Champion – Phillip Atondo
Hole Shot VTR Features:
Small pin design for the ultimate in responsiveness
A triumphant contender on blue groove to wet, hard packed surfaces.
Square-lug technology throughout the tread design
Available in World Championship / extremely proprietary XTR, M2, and M3 compounds
VTR Features:
Forward thinking 1:8 style mounting beads for increased bonding strength and easy mounting ability
Next generation long-lasting Molded Foam Inserts
The lightest 1:8 Truck wheel, tire, and foam combination available. Only 177 grams total weight (using Hole Shot M3 and zero offset wheels)
Balancing virtually unnecessary
Textured bonding surfaces with molded in glue channel
Narrow tire profile reduces sidewall flex while increasing agility and responsiveness
Packaged together with w resealable bag complete with tire selection chart, tire performance tracking log, and tire identification ID labels
Tires and wheels designed, developed and made completely right here in the USA
A collaborative effort between World Champions Ryan Cavalieri, Billy Easton and Pro-Line’s dedicated in-house engineering team – you’re getting the best of all worlds
What’s included:
Hole Shot tire (2)
Next generation long-lasting Molded Foam Inserts (2)
Resealable bag (1)
Tire ID labels (1 sheet)
Tire Specs
Height: 5.52"
(140mm)
Width: 2.36"
(60mm)
Mounting Bead: 4.0"
(102mm)
Weight: 88.0g
Foam Specs
Outer Diameter: 5.30"
(135mm)
Inner Diameter: 3.92"
(100mm)
Width: 2.27"
(58mm)
#9033-00
(XTR) Pair (fits VTR Wheels)
Price: $34.95
#9033-01
(M2) Pair (fits VTR Wheels)
Price: $34.95
#9033-02
(M3) Pair (fits VTR Wheels)
Price: $34.95
87963
87964
87965
87966
Split Six 2.2"/3.0" Bead-Loc Front & Rear Wheels (2) for Slash®
Hey there all you Slash® fans check out Pro-Line’s new 2.2” x 3.0” Bead-Loc wheels for your Slash®. New wheel, new and improved Bead-Loc, and all in one complete wheel package it’s the Split Six.
Wheel Features:
One sided Bead-Loc captures both sides of tire evenly
3-piece design for easy install and no gluing of tires.
Wheel made from high-strength, durable DuPont® nylon material
New and improved die cast ring design has stronger hold and casted in Pro-Line logos
For use on front (#2714) and rear (#2715) of Slash®
Six stainless steel button head screws included per wheel
2.2” front side for realistic look and 3.0” back side for suspension clearance
Same track width as stock wheels
A deep, sating black finish on all Split Six wheels.
Bead-Locs available in stainless steel, red, or satin black finish
What’s included:
Split Six Wheels (2)
Bead-Loc Sleeves (2)
Die Cast Bead-Loc Rings (2)
Stainless Steel Button Head Screws (12)
SPECS:
Outer Diameter: 2.2"
(56mm)
Inner Diameter: 3.0"
(76mm)
Split Six 2.2"/3.0" Bead-Loc Front Wheels (2) for Slash®
#2714-02
Black/Black Pair (2pc)
Price: $29.95
#2714-03
Stainless Steel/Black Pair (2pc)
Price: $29.95
#2714-04
Red/Black Pair (2pc)
Price: $29.95
Split Six 2.2"/3.0" Bead-Loc Rear Wheels (2) for Slash®
#2715-02
Black/Black Pair (2pc)
Price: $29.95
#2715-03
Stainless Steel/Black Pair (2pc)
Price: $29.95
#2715-04
Red/Black Pair (2pc)
Price: $29.95
87962
Hole Shot VTR 4.0" Off-Road 1:8 Truck Tires (2) for Front or Rear
The 1:8 Truck class has advanced significantly in the past few years from chassis configurations, suspension, drive train technology and other advancements. Wheels and tires are no exception to this and today, Pro-Line introduces the next generation of wheel and tire combination with the VTR line.
Now, the VTR line is just more packs a bigger punch with the Hole Shot tread pattern. The Hole Shot tread is your 2009 The Dirt Nitro Challenge Champion in 1:8 Truck. It’s also been used to capture numerous regional and national events over the past decade. When you’re looking to turn up the heat at a local, regional, or national level, check out the VTR series Hole Shot 1:8 Truck tire.
VTR is already the choice of champions:
2009 Silver State Nitro Challenge Champion
2009 Canadian Indoor Off-Road Shootout Champion – Chad Bradley
2009 JBRL rounds #1 and #2 winner in 1:8 Truck – Ryan Cavalieri
The 2009 Hank Perry 240 Champion in 1:8 Truck – Rick McCrery
2009 Memorial Day Shootout 1:8 Truck Champion – Phillip Atondo
Hole Shot VTR Features:
Small pin design for the ultimate in responsiveness
A triumphant contender on blue groove to wet, hard packed surfaces.
Square-lug technology throughout the tread design
Available in World Championship / extremely proprietary XTR, M2, and M3 compounds
VTR Features:
Forward thinking 1:8 style mounting beads for increased bonding strength and easy mounting ability
Next generation long-lasting Molded Foam Inserts
The lightest 1:8 Truck wheel, tire, and foam combination available. Only 177 grams total weight (using Hole Shot M3 and zero offset wheels)
Balancing virtually unnecessary
Textured bonding surfaces with molded in glue channel
Narrow tire profile reduces sidewall flex while increasing agility and responsiveness
Packaged together with w resealable bag complete with tire selection chart, tire performance tracking log, and tire identification ID labels
Tires and wheels designed, developed and made completely right here in the USA
A collaborative effort between World Champions Ryan Cavalieri, Billy Easton and Pro-Line’s dedicated in-house engineering team – you’re getting the best of all worlds
What’s included:
Hole Shot tire (2)
Next generation long-lasting Molded Foam Inserts (2)
Resealable bag (1)
Tire ID labels (1 sheet)
Tire Specs
Height: 5.52"
(140mm)
Width: 2.36"
(60mm)
Mounting Bead: 4.0"
(102mm)
Weight: 88.0g
Foam Specs
Outer Diameter: 5.30"
(135mm)
Inner Diameter: 3.92"
(100mm)
Width: 2.27"
(58mm)
#9033-00
(XTR) Pair (fits VTR Wheels)
Price: $34.95
#9033-01
(M2) Pair (fits VTR Wheels)
Price: $34.95
#9033-02
(M3) Pair (fits VTR Wheels)
Price: $34.95
87963
87964
87965
87966
Split Six 2.2"/3.0" Bead-Loc Front & Rear Wheels (2) for Slash®
Hey there all you Slash® fans check out Pro-Line’s new 2.2” x 3.0” Bead-Loc wheels for your Slash®. New wheel, new and improved Bead-Loc, and all in one complete wheel package it’s the Split Six.
Wheel Features:
One sided Bead-Loc captures both sides of tire evenly
3-piece design for easy install and no gluing of tires.
Wheel made from high-strength, durable DuPont® nylon material
New and improved die cast ring design has stronger hold and casted in Pro-Line logos
For use on front (#2714) and rear (#2715) of Slash®
Six stainless steel button head screws included per wheel
2.2” front side for realistic look and 3.0” back side for suspension clearance
Same track width as stock wheels
A deep, sating black finish on all Split Six wheels.
Bead-Locs available in stainless steel, red, or satin black finish
What’s included:
Split Six Wheels (2)
Bead-Loc Sleeves (2)
Die Cast Bead-Loc Rings (2)
Stainless Steel Button Head Screws (12)
SPECS:
Outer Diameter: 2.2"
(56mm)
Inner Diameter: 3.0"
(76mm)
Split Six 2.2"/3.0" Bead-Loc Front Wheels (2) for Slash®
#2714-02
Black/Black Pair (2pc)
Price: $29.95
#2714-03
Stainless Steel/Black Pair (2pc)
Price: $29.95
#2714-04
Red/Black Pair (2pc)
Price: $29.95
Split Six 2.2"/3.0" Bead-Loc Rear Wheels (2) for Slash®
#2715-02
Black/Black Pair (2pc)
Price: $29.95
#2715-03
Stainless Steel/Black Pair (2pc)
Price: $29.95
#2715-04
Red/Black Pair (2pc)
Price: $29.95