View Full Version : Lunsford Ti-Turnbuckles from E-Maxx article
OK, I ordered the turnbuckles in George's racing E-Maxx awhile ago and have been in contact with them. But here's the problem. They are too long making the toe-in about 5-6 degrees on each wheel, even when screwed in all the way. I e-mailed Lunsford and they said they should fit, but they dont. They said to replace them, get the sizes you need and return them with a letter. No problem, except I dont know the sized of the stock turnbuckles. I would measure them with a ruler, but I dont know if thats how they measure them or what. IS there somewhere I can find it for front an rear in inches? RCCA: What size's did George use?
Thanks, James
ammoace
05-22-2001, 03:33 AM
Well the T-Maxx manual shows that their Ti Turnbuckles are 96mm in front and 105mm in the rear.
Hope this helps,
AMMOACE
SteveP
05-22-2001, 09:38 AM
I used the 96 and 105mm turnbuckles on my truck and it worked fine. You sure your not trying to use the long turnbuckles on the front?
Clayton
05-24-2001, 03:06 PM
You may be putting your turnbuckles on the bottom of the steering arm and not the top as they should be.
All is installed correctly. I got the ones from the mag that George used on his E-Maxx, same exact part number. The front and rear has too much toe in. I wonder if they gave me the wrong ones on accident? The front and back ones are longer than the stock steel ones. Im VERY confused.