Traxxas Nitro Stampede

[N-Pede madness]

I only know of the rd ones

[dcshoelover]

Which pipe has more low-end punch...the mip stinger exhaust, or one of those cvec dual outlet pipes? And would I beable to fit a cvec on a mip header and shocktower set-up?

[dcshoelover]

double post - sorry.

[Racerze]

whens the stampede gonna get an engine upgrade like the rustler? and im wearing DC shoes right now

[dcshoelover]

They only said sompthin about the rustler and 4tec being updated. Im sure you could put in the new 2.5 or whatever it is tho. So do you skate or what?

[R6905]

if you put a wheelie bar on your stampede wouldnt it work just fine with a 2.5 engine in it? also you could make a wheelie bar that touches the ground at all times so if couldnt pop wheelies at all



Brandon

[Racerze]

never popping wheelies would suck! its 2wd so wheelies are a good thing. oh yea i skate, recently been getting into some old school pogo type stuff.

[CJ-5]

The 2.5 will fit directly onto the Nitro Stampede. But the pede is already overpowerd as it is, think we should mess with that??. . . . . .yep!:D

I'll be getting a 2.5 ASAP

[dcshoelover]

There was someone on here before talking about putting a .21 in his pede, think of that kina wheelie power! Anyone know how much this new engine is gunna cost? And could you possibly exchange the old one for the new one?

[CJ-5]

The new engine is 165.99 at tower and I think we are going to ba able to exchange the engines in their exchange program. But your gonna have to pay somethuing like 90 for the new engine.

[dcshoelover]

Well I guess that's better than $165!

[Evil_S10]

I have a Pro Ball Differential w/bearings for sale. I personally built it myself and used all the necessary steps to make it better than Traxxas's ways. I bought it new and Hobbytown for 60, but I will sacrifice it here for 20+s/h.

[geofroley]

DUDE I NEED HOP UPS FOR MY PEDE!!!!!!!!!!!!!!!!!!!!!!ALL I HAVE IS AN RPM BUMPER.I CANT GET A STINGER FOR LIKE SIX WEEKS

[dcshoelover]

Buy bearings.

[trxstr1961]

I just got my rom mate a N-PEDE, its stock, and need to know some things about it:


where can i get a new .15,body,front body mount,stock exhaust for it at?? i know about tower but do they carry the front body mount and the stock exhaust for it:confused:


For the best in smilies, go here:
http://www.click-smilie.de

[dcshoelover]

Tower carries everything for the npede, just go into the npede, then click on replacement parts, or search the parts individually.

[N-Pede madness]

all stock but the MIP stinger pipe and steel yokes


http://mediaservice.photoisland.com/auction/Sep/2002982433582839926405.jpg


http://mediaservice.photoisland.com/auction/Sep/2002988614277657271008.jpg

http://mediaservice.photoisland.com/auction/Sep/2002981893275189485454.jpg

http://mediaservice.photoisland.com/auction/Sep/2002982459643004205823.jpg


http://mediaservice.photoisland.com/auction/Sep/2002988585098950659304.jpg

[dcshoelover]

Sweet pics man, is that some kina moto trail ya got?
I finally got new fuel lines and a new fuel tank, and now my truck runs sweet as ever, except I broke the servo saver.

[geofroley]

that is so ******* sweet man!!!!wish i could do that with my npede

[GreenArrow]

PLEASE HELP!!

I've tuned and tuned and reset the needles to the factory settings and I get nothing. If I can get it to run, it will only run while I press the button on the EZ Start thingy (and it only did that once). After that all it would do is spit fuel out the exhaust. So naturally I think its waaaay rich and lean it out some and still nothing.

I have bought new glow plugs, but the blue wire won't fit over them so I have to wait until I get an igniter.

This is really getting depressing. I've seen all these pics of other folks having so much fun with their pede while mine sits on my desk, mocking me :(

Oh, and I should make a point to say that I had run about two tankfulls out before it started to act up.

So does anybody have any ideas?

[dcshoelover]

You should be able to widen the ez start wire to fit over any glowplug.

[dont slow down]

im breaking in the new engine in my new pede, i got a .18 for it, wow, that thing is fast. i also added some traction bars just for cool looks. one thing about this thread that bothered me, all the pics of yours guys trucks, they are wayyy too clean. lol mine is just plain gross after i run it. oil, and fuel all over the place, and its a freaking dirt magnet!! dirt and dust everywhere, i definately appreciate the cleanlieness of electric, but nitro is really cool too. well ill see you guys later.

[dcshoelover]

I recently took my pede through my dad's nature trail in his back yard right after it rained...What's clean mean?!?!? But I broke the servo saver so im outta comission again.

[dont slow down]

i just picked up a boost bottle so im gonna try one of those, then eventually i want to get a tuned pipe. ill put up some pics later.

[geofroley]

i just got a new CVEC pipe.i havent tried it out yet,but im sure it rips.ill have pics up soon

[dont slow down]

here is my stampede. i dont have any pics of the chassis yet but hopefully i will soon. btw, the stampede is the red one, just to let you know. :D

[geofroley]

i just got to run my npede with my CVEC.that pipe rox

[dont slow down]

i was just wondering, does anybody have any problems with spur gears stripping? i have gone through about 5 in 3 days. it seems no matter what i do, when ever i go in the dirt, it stripps. on the street it is fine, they will last a really long time, but as soon as i take it in the dirt, it strips within a minute. i know how to set the mesh and all that but it ticks me off that i cant go off road.

[R6905]

dont slow down... whats the blue truck in the picture????? you have some sweet looking trucks!



Brandon

[geofroley]

im not havin that prob

[dont slow down]

R6905- thanks. i try to make them look nice, its a mrc m10-s that i converted to a monster truck, sort of, just big tires, new shock positions and a body lift. it has a ton of hop ups but i wont go into detail cause it takes a while for me to write all the stuff down. :D i also have a tamiya wild dagger that i play with but it doesnt have anything special on it, yet :D i plan to do a lot to the dagger. but my new toy is the stampede, but yeah maybe im just retarded or something but i go through spur gears quite a bit, but thats ok, cause i got hook ups. i can get them for only 1$ :) ill have to take a pic of al three of my trucks soon, but ill put up another pic of the mrc, dagger, and stampede later.

[CJ-5]

Nice truck. The spur problem loosen the slipper clutch a tad. Or you could go get a steel spur. A lot of people bad mouth those steel spurs but I have one and that truck has gone though hell and back a few times and the spur doesnt have one nick in it. I just like steel gears period but I have to reccomend it.

[geofroley]

should i get lunsford titanium turnbuckels?i heard that they dont bend,which i could really use since the last time i was racing my pede got both its turnbuckles bent.please help thanx

[dcshoelover]

Go for it. It solves the problem.

[geofroley]

okie dokie.thanx

[CJ-5]

I'm lookin for a replacement pipe for my pede does anyone have any good suggestions? I have a MIP stinger but the pipe keeps coming off and the truck is loud with it. When the pede runs you cant even here my .21 tmaxx going. I want something with good low end and decent high end, I dont really care where it goes side or 360 just lookin for something durable.

[dcshoelover]

From what I here the cvec has nice low end. I wonder if you can't mount a cvec pipe on a mip 360 header and shock tower setup. Thatd be cool huh?!?

[geofroley]

yes yes yes get the cvec.i have one on my pede and it pumps out ridiculous power.

[dcshoelover]

Do you have it mounted on the side? Is it at all possible to mount it ina mip set up.

[CJ-5]

I have a CVEC pipe and I used to use it on the pede, it made insane power. I think I will go out and buy the 360 header. I want to move the pipe out the rear or up more.

[geofroley]

yes i have it on the side

[R/Cbum4life]

Yeah how much does a nitro pede cost? Can I get it in a kit or just ready to run?

[dcshoelover]

Its something like 240 for the kit and 280 for rtr.

[geofroley]

yes it does come in an rtr.it costs around like 200 bux,but i dont remember.youll need a charger for the easy start,a dynamite nitro wrench,and servo and radio batteries.and of course youll need gas.the performance is very well.one hop up you should get is an rpm bumber.the stock bumper doesnt protect the suspension.

[geofroley]

okay im having trouble with my pede.the CVE that connects to the black yoke keeps coming off.what i really mean is that the black yoke keeps coming off.the first time it happened i just fixed it and headed out for a test drive.i got it started and started goin and the black yoke disconnected before i even got out of the garage.please help me.

[dcshoelover]

Make sure you use locktite on the setscrews otherwise they'll just keep vibrating out and ur yoke will slide off.

[dont slow down]

hey i gots a problem w/ my stampede. i keep snapping the rear axels so i bought some cvd's for the stampede, however when i installed the drive cups and the cvd's, i would give it throttle and the ball would pop out of the cup. its like the shaft isnt long enough but the package said "fits nitro stampede" is there something else i have to do to make them stay?

[dcshoelover]

I know a lot of people that have this problem. In the packge of cvd's there was some plastic washers, U can put them inbetween the drive cups and the tranny case. That pushes them out alittle bit. Another thing you can do is, on the bearing carriers, there is 2 different holes for the pis to go through, if you move the pin to the uppr hole, that helps too. Oh and washers between the bearing and the part where the axle and cvd meet helps keep the cvd from sliding around abit.

[dont slow down]

ok ill try that this afternoon

[geofroley]

im thinkin about pickin up some mip cvds

[geofroley]

does rossi make any .15 engines?i no that trintiy/picco makes some but i was thinkin about getting 1 but there way to expensive

[geofroley]

what do ribs do?

[crazyL]

ribs protect the heart and lungs from being damaged.

[geofroley]

:rolleyes: thats nto what i mean dude,ribs on a car

[dont slow down]

hey i have a question for you guys. after i got my stampede, it was used, i bought it from my friend, after a few runs, the battery pack box cover thing was really nasty, all covered with fuel residue and dirt, really gross. anyway i pulled the muffler out and the metal tube had melted the plastica and was leaking all over the car. so i bought a new muffler and it stopped, but then about 3 days ago, i noticed that it was really nasty again, i pulled it out, but it looked fine, no holes or anything, but its all gross again, are your guys trucks like that or is it just mine?

[dcshoelover]

Do you have a gasket between the header and the engine? And is the coupler zip tied tight enough?

[dont slow down]

yeah i got the gasket there and it is zip tied onto the couplers. its all gross right under the muffler, you know where the batterys are put, under that plastic box. the outside gets all goopy.

[dcshoelover]

Maybe ur runnin to rich, too much unburnt fuel is just just goin through the exhaust and on to ur battery box.

[dont slow down]

im 2 and 1/2 turns out for the needle setting, i just dont get it, im gonna tear it apart this next week to try and fix it.

[geofroley2]

hey ppl its me geofroley,i got banned.anyways my battery box was really dirty(till i got my cvec)make sure there r no leaks in the line.clean it out often

[dcshoelover]

Wow, everyone must be out having fun with their npede.

[dont slow down]

well i got some new parts for my pede this weekend. i got a mip tuned pipe, some cvd bootys :D new rear hubs and new front upright carriers. i put it all together tonight so tomorrow i get to see how that tuned pipe works. i started it up, and it sounds way different. i had one heck of a time getting the shocks mounted right though, they were too close to the tower so i had to do some grinding to get them to fit right. ill let you guys know how it works.

[NPedeInsanity]

thats alot of stuff dude

[NPedeInsanity]

its almost christmas so ill be gettin some new stuff as well:D :D :D :D

[dcshoelover]

Anyone have any good pics of ur trucks? Action shots or not, lets see 'em.
Hey Roy, hows ur all aluminum npede runnin?

[trxstr1961]

my room mate has a n-pede and im wanting to know what a descent mill for it would be?? also, ill be needing linkage, and fuel tubing for it, also, what ehaust would u reccomend??

[TitansGT4]

Big snowstorm in NJ a couple of weeks ago. I was wonderin how the NS does in the snow. I want something RC for Christmas and i lik the maxx 2.5 but its expensive i lik this truck cause its cheap and seemz pretty popular. if it can handle the snow im buyin 1 cause thas y i want a truck. ne help iz good

[big2wons]

Wondering if anyone has put a tmaxx body on there N pede??? Does it work??? How does it fit???

[dont slow down]

i did, i put one of those atomik f 350's on my nitro pede, and it fits perfectly, the wheel wells line up good, the only thing is you have to give the body posts some extentions but other than that, works great

[95Dakota]

Hello, does any one want to trade a decked out npede for a new era tube frame clodbuster with an evx and extra plowboy tires. email me at Jyuhas37@msn.com

[dcshoelover]

My buddy hada t-maxx gravedigger body on his npede. He had to use taller body mounts, but it looked pretty cool.

[big2wons]

Does anyone have pic's of a maxx body on a pede?? I'd just got a panel body that i want to put on my pede and want to try to get a sense of what it should look like... Also what's the largest spur you can run on a pede? I tried a 72 and 70 spur and can't get them to fit???

[dont slow down]

ive put a 72 tooth on but i had to do a bit of modifying to get a proper mesh. as for the body, i only have a pic of my f350 body. here it is

[dont slow down]

just to let you know, the red one is the stampede, but both bodys are tmaxx bodys

[all aluminum]

Here are some pics of my NPEDE:

http://derick1105.20m.com/images/front_view.jpg

http://derick1105.20m.com/images/top_view.jpg

http://derick1105.20m.com/images/rear_view.jpg

[dont slow down]

ok, you have to tell me how you put those wheels on there. that thing is bad!! but i think you should take off the wing, i think it would look better. but jmo

[big2wons]

I'm rebuilding a beat up stampede i bought (that's why i have sooo many questions, lol..) but i converted the front hub system to the elctric pede system.. it didn't make sense to me to have the bearings in the wheels... so the hub system now is hex based system where the front wheels are attached to the axle similiar to the rear wheels (the wheel attaches to the hex which is attached to the axle with a stub pin). I'm now finding that the front wheels don't turn particularly when the wheel is turning inward... So if you are facing the car from the rear of the car the right wheel doesn't turn well when the car is turning left and the left wheel is not turning well when the car is turning right... is this normal? I've never had a 2 wheel drive car??? Has anyone else tried this conversion...??

[dcshoelover]

I bought a nitro rustler that has that setup but i haven't been able to run it yet.

[all aluminum]

Dont slow Down, I used the MAXX ADAPTERS from heavy throttle rc...I used the front suspension from the electric pede ....BTW, I put a spoiler in there to make it different from the rest of my f-150 trucks

http://derick1105.20m.com/images/lids.jpg

[dont slow down]

i see, those bodys are pretty cool, how much did those adapters cost you? and what else would i need to convert the front suspention? just hubs? or new arms or links?

[all aluminum]

I paid $25 plus shipping back then..it might have gone up..., I used the A-arms, c-hubs, and the rpm bearing carrier from the electric pede to make it work...check out this site for the max adaptors ; http://lindquistproductions.com/heavy_throttle/

[big2wons]

I figured out why my front wheels weren't turning... The offsets for the electric and n pede front wheels are different (as well as the rear).. If you convert your n pede front wheel system to the electric system and you want to keep the 2.2 tire size you MUST get wheels with deep offsets. In other words the wheel must connect to the hex hub almost at the very edge of the inner part of the wheel.. So your wheel should look very shallow if you look at where the hex hub goes and very deep if you look at it from the where the nut tightens the wheel to the hub... You need to get wheels that make your car as wide as possible... If you put electic pede wheels on a nitro pede, you'll see that the car will get noticably narrower...

I used megatech wheels for the tempest gladiator... I still needed a spacer between the wheel and the hex hub as well as a washer between the wheel and the nut that holds the wheel to the axle... it was a pain to figure out... the megatech wheels are deep wheels, but are still not ideally deep enough... These 2.2 wheels suck... i wish there was a universal system similiar to the ones for touring cars....

I didn't want the maxx wheels cause i don't really know this car as well as most do and there are gearing issues with using tires that large... you're acceleration will be dramatically effected.. for those who are using maxx tires, what gears are you using?

[dcshoelover]

Does having the bigger maxx wheels on your pede rob any of the performance?

[cheapjeep_95]

does anyone make a 2 speed for the stampede or does anyone have info on how to adapt one?thanks

[big2wons]

Nobody makes a two speed... I don't believe there's a way you can fit inside the tranny case??? besides, with the truck being two wheel drive, it would be hard to control the darn thing...

[dont slow down]

for me the darn thing is already too hard to control at top speed, a little too much steering input and the thing is a cartwheel machine! lol, i wouldnt even want a two speed. if you want more speed, try gearing up a little bit, or get a faster engine. those are the two best ways to get more speed, and you could try a tuned pipe, if you dont already have one. when i added mine, i got quite a bit more bottom end, and some more top end. so try those if you want more speed.

[dont slow down]

if you love your pede and you know it clap your hands....(clap clap) lol, yeah im really bored :D how is everyones pede doing anyway?

[dcshoelover]

My pede's doin good. Winter it's goin to sit on my rc table, hopefully getting new hop-ups every once inawhile. But only the bare essential performance and durability ones. Some of these people go way over board with their full aluminum machines. With the exception of Roys own full blown RD pede. His atleast looks good and color coded. In the spring when my pede's good and ready to roll out of the showroom, i'll get some nice pics up.

[dont slow down]

i waiting on my piston and sleeve to come back from being squeezed. then i gotta pick up some fuel and then, its bashing time. yeah in california here, you can still run your r/c's. no snow here, in fact its been in the mid 70's the past couple of days. so im just sittin here twidiling my thumbs till it shows up.

[kevin28]

Hey guys,
I just picked up a used stampede. It has a os.12 w/ the pipe and full bearings. This thing is crazy. My question is this...how can i make it turn. at slow speeds it doesn't turn well at all, and at full speed the two front tires are 4" off the ground. are their any suspension parts that i need for turning/handling?
How should i be adjusting the suspension?
thanks for any help
-Kevin

[dont slow down]

depending on what servo thats in there, you could try a better servo. also, you could try softer springs in the rear to help keep the front wheels on the ground. i find that its best to have you front tires, straight up and down, and straight forward. no toe in or what not. i have a hard time keeping the wheels on the ground too, you will learn how to do it, it just takes practice. have fun with it. if you have any questions, ill be happy to help.

[dont slow down]

Well, i just got my pede back up and running, and got some new rims and tires. i put my engine back together, had some difficulty starting it, re broke it in, put on my new paddle tires, and headed to the beach. those paddles, when propelled by .18 engine, wow, what a roost! i had a ton of fun just cruisin around and thowin up some sand. some guy stopped and offered me 350 for it, but i like it too much to sell it right now. got some proline agitator rims for it and they look awesome. ill get some pics and some videos of my pede runnin around. im still working out all the bugs and such with the videos. they will come though.

[dcshoelover]

Yeah I finaly got my pede up and runnin too. Had it flyin up my dirt hill of a front yard and through the neighbors grass too. Well I got it to the top of my hill, and the wheel falls off. So I take it inside and start the project of getting the nt back on the axle. These mip nuts for the cvds are like a hair bigger than the original axles, and you can't really fit a socket thingy into the stock rims to put these things on. So I get the wheel back on, get her rippin outside again, and this time the wheel comes off when im doin like 30 towards my hill. So the wheel rols down my hill and across the road, and this time i've lost the nut for sure. But I work ina hardware store so it's all good.
And so ends another adventure...of Brougham - thee unstopable Npede!

[Heavy Throttle]

I've recently entered the realm of nitro trucks and picked me up one on ebay for a good price. It's already been torn apart and new hop-ups added. It's a fun truck and it's doing extremly well at the track, but i just got it for other reasons as well.

http://lindquistproductions.com/heavy_throttle/nitro_stampede/body02/picture06.jpg

http://lindquistproductions.com/heavy_throttle/nitro_stampede/picture02.jpg

More Info Here (http://lindquistproductions.com/heavy_throttle/nitro_stampede/index.html)

http://lindquistproductions.com/heavy_throttle/nitro_stampede/body02/picture08.jpg
And here is what is in store!!

:D

[yokozuna4x2]

thats a nice pede man...:)
im building up one to use as a (club truck)...itll be fitted with a tmaxx gas tank also for extra long runtimes..
in case youre wondering what i mean by club truck...at the track there mite be ppl that have never drove a monster truck before so this truck will give em a lil taste of r/c trucking..:D
im gearing it 16/72 and installing a n-sport engine for "tamer "power...lol

[yokozuna4x2]

heres a couple of my n-pedes...i still have digger but i gave bearfoot to my bro...:) i hope this works...lol

[yokozuna4x2]

heres a couple of my n-pedes...i still have digger but i gave bearfoot to my bro...:) i hope this works...lol

[yokozuna4x2]

heres a couple of my n-pedes...i still have digger but i gave bearfoot to my bro...:) i hope this works...lol


i looked back at my post and found 3 of the same posts...:eek:
mods please delete 2 of them...thanks:)

[yokozuna4x2]

hey guys i have a replacement of bearfoot built..:D the chassis is a "clone" of digger.;)
as far as my clubtruck...it is together but the n-sport engine proved stronger than i expected...lol
so i played with the throttle linkage to slow it down more..when i get my camera processed ill post pics of it....the trucks official name is "spare parts"....simply because thats where it came from...lol:D

[yokozuna4x2]

i was successfull in slowing it down for beginners...:)
i can adjust the linkage by the trim control enuff to make it fun for me to drive also...lol:D
im now ready for racing season so i can campaign my club truck to get new would-be r/cers involved in this great hobby we all share...
the lil truck handles super...take-off(when trim is wide-open)aint bad plus top end aint too shabby either..:) truck is geared 16/72 so its quick off the start...lol

[trxstr1961]

howdy all, my room mate has a n-pede, and im rebuilding it this week, and im wondering what a good choice for a body would b?? :confused:

[dcshoelover]

The parma gravedigger is cool, otherwise the proline silverado.

[tl01boi]

i have a super nitro with 2 speed tranny 3 sets of wheels 2 bodies newer heat sink head that was dipped in chrome and tuned exhaust that was dipped in chrome i also have 1 extra tuned exhaust for trade we can either trade my car no electronics or engine for your car with no electronics or engine up to u

[tl01boi]

i have a super nitro with 2 speed tranny 3 sets of wheels 2 bodies newer heat sink head that was dipped in chrome and tuned exhaust that was dipped in chrome i also have 1 extra tuned exhaust for trade we can either trade my car no electronics or engine for your car with no electronics or engine up to u

[dcshoelover]

Ur definitely in the wrong spot buddy, both of ya!

[trxstr1961]

im in need of help, i got a n-pede and it seems like the bearrings are full of goo.. im thinking wd40. if it is, how can i degoo them :confused:

[dcshoelover]

Soak them in paint thinner or gum out for a couple of hours. And them make sure you relube em before you reinstall them.

[trxstr1961]

will model paint thinner work??

[dcshoelover]

Yeah. Thats what I use, testors.

[trxstr1961]

TY ffor that info, that helped alot :)

[trxstr1961]

Well, i have a rolling chassis again :) now all i need is: eletronics, mill, and new body.

[dcshoelover]

Sweet deal. Post up some pics when ur all finished.

[dakensboats]

I can get a stampede (n) for $200 can. would it be a good deal?
Its used. thanks
daken

[dakensboats]

does anybody have some nitro stampede videos? please I need to see these things go! thanks
daken

[RCFAN]

i have been looking at the pede and i think i want one but when i do get it i want to change engines what engine's are you all running i was looking at the os cvr 15 but i dont know if it need's a long shaft or what and what type of carb does it need. thanks'

[dcshoelover]

You can go to www.traxxas.com for videos. As for the engine im not sure on whats required. But if you do find out please post your info up cuz i'd like to know too!

[Kenny123]

Is there anyway to make the ped 4WD?

[dcshoelover]

I believe there was one guy on here who had a clodapede that he converted to 4wd. I think if you page back a couple you migh tbe ale to find it in here. But if not then ur pretty much on ur own with the design.

[rcwheeling]

http:// http://community.webshots.com/scripts/editPhotos.fcgi?action=showMyPhoto&albumID=70757343&photoID=70757541&security=yVvoXt

[rcwheeling]

sorry the link to my n pede 15 feet in the didnt work but it was a col jump

[dcshoelover]

15 feet! I'll bet.

[rcwheeling]

i think i got it this time

[dcshoelover]

Looks like you got pretty vertical. How big of a jump are you hitting?

[rcwheeling]

the fence to the far right side of pic is at 8 feet high the ramp sat about 2 feet lower them that i was going around 25-30 if i had to guess

[pedeman]

Does anyone know where I can get a N-stampede for less than $200??? Im only 13, but I want a nitro... Right now I have a E-pede...

[dcshoelover]

EBAY!!!!!!!!

[pedeman]

ive been looking there, but I have found nothing that "floats my boat" as my mom would say :rolleyes: :rolleyes: :rolleyes: :rolleyes: :rolleyes: I WANT A N-PEDE!!!!!!!!!!!:):):):)

[N-Pede madness]

heres some new action pics of my n-pede and new pics of my track.

http://community.webshots.com/user/nitropeaker

[2.5 guy]

Originally posted by Mason Copeland
I found out how to mount maxx rims and tires on a pede...
http://lindquistfamily.net/eric/stampede/maxx_conversion/

I can't get it up:( :mad:

[pedeman]

wont work for me ether...(sp?)

[N-Pede madness]

whats a good engine for my pede???

[stampede15]

You basically have three good options. The .15 OS CRV-X is a good reliable upgrade. The Megatech M16 and the Fantom FR15 are also good choices. I would recomend you look at those and decide, but personally i would go with the Megatech M16.

[N-Pede madness]

thanks for the info I will see what my lhs has in stock



and heres some new pictures of my truck

http://www.******.net/member/4-tecmadness

[nitrodude_1]

I think traxxas should come out with a kit that is good with cvds that has no engine or radio string light fast one. that would be a awsome kit not there cheap plastic kits. I know I have had several traxxas kits and they all break aspecially the drive shaft. I think they need a new kit.

[N-Pede madness]

Originally posted by nitrodude_1
I think traxxas should come out with a kit that is good with cvds that has no engine or radio string light fast one. that would be a awsome kit not there cheap plastic kits. I know I have had several traxxas kits and they all break aspecially the drive shaft. I think they need a new kit.

The steel yokes will fix that.:D

[BritishRacingGreen]

hey does anyone know where to get aluminum suspension/chassis parts for this truck, all i can find are Maxx parts, and could Mason Copeland repost that link, id really like to read that.

[dcshoelover]

www.neweramodels.com or ebay's usually got alot too, just search rustler too

[Freedom]

Originally posted by stampede15
You basically have three good options. The .15 OS CRV-X is a good reliable upgrade. The Megatech M16 and the Fantom FR15 are also good choices. I would recomend you look at those and decide, but personally i would go with the Megatech M16.

Can you tell us if those engines will drop right in, thanks.

[cbr74]

Get the Traxxas upgrade kit and put the TRX 2.5 in your Pede. It's a lot of fun.

[sofast]

Wow, this thread died when I left lol... I dont have my N pede anymore... Finally gave it up and I regret it lol... Anyone want to sell one??



Sofast:)

[cbr74]

I have a 2.5 Pede I could part with for $300.

[microrcdude]

My friend just got a stampede!

[GT Freak]

Hello all, i have a n-pede, just got it. its a roller, so im needing to know what engine goes to it, whats avaiable, and where to get it at?

[microrcdude]

the TRX.15 fits perfectly

[offroadracer44]

anyone who is running the full stinger set-up!!!


the 360* header causes your engine to run lean and hot, put on the stock rear shock tower ((minor modification)) and put on the stock header ((bore out if nessessary)) then put then rear body mount back on, some zip ties...

You have no idea how much better and longer lasting your engine will be... no one believes me but it's true, ask anyone who has a clue at your lhs.... if you dont believe me try it, keep it the way it is, then switch ((bore out the header, massive power)) the motor will run cooler and longer, perfromance difference none, it's just engine life and temps



try it!

[offroadracer44]

I am selling my pede....
as much as this pains me I have to I am in a budget crisis and need money desperatly

I want/need $400 for it
that 4 includes:

The pede
futaba s9202 hi torque steering servo
Megatech M-16 motor (runs like new, fires right up)
Hardened steel drive yolks
RRP Hardened steel spur gear
MIP Stinegr exhaust

as for everything else:
Proline Masher tires w/ foams
Proline Trac-Ta-Gators w/ rims
Proline Speed Hawgs
two sets of the original tires
New mini temp gun w/ extra battery, lanyard and aluminum case
about 4 sets of springs
two new rear shocks built and ready to run
two new front shocks (one in missing a cap)
about 5-7 new glow plugs
many shock parts
many misc parts for it
new differential just installed
((all of these come in a parts box, sorted out))
An old TRX . 15 block 2 heads 2 pistons and about 4 sleeves and an extra connecting rod
a 2055 hi-torque servo minus top piece (1.50 at lhs)
a complete 2018 servo ready to run
GS racing locknuts
2 22t clutch bells
New clutch
3 easy starts
extra easy start motor
extra one way bearing or two
a dynomite vision peak charger
dynomite ignitor with 2 batteries
dynomite 3/32 allen driver for the motor mounts
some misc fuel tubing


I am really sad to see this go and I hope it goes to a wonderful owner

if anyone is interested please e-mail me at
jakemail@dudashfactory.com

please advise that the buyer pays all shipping and the price is negociable

please let him go to a good home

[bob333]

man what happened to this thread it just died

[Dan J]

I'm glad you bumped it Bob, my better half is getting a Stampede to run with my Revo. Always good to read good things about a truck you just bought ;)

dan

[Dan J]

Alright, I'm searching, but can't find the answer. Does anyone know what other trucks share the same body with the Stampede? I'd like to get another body for it but what fits?

Thanks,
dan

[bob333]

I dont Know about your question but what about that engine in it is the old pro 15 slow like everyone says or is it almost as fast as the 2.5 in your REVO cause im thinking about a monster truck namely REVO but what is a better basher the revo or the pede.

Thanks in advance,
Bob

[Terry]

Alright, I'm searching, but can't find the answer. Does anyone know what other trucks share the same body with the Stampede? I'd like to get another body for it but what fits?

Thanks,
dan

Try parma, I know they have some, they have a dakota body that I will be picking up to match my full size. Look at the description, make sure it doesn't say t-maxx,mgt or the likes, it should say 1/10th. HPI has some and so does proline, you just have to look at the description.

[Dan J]

Bob,
I really don't know what we're getting. It's used and will be here next week hopefully.

dan

[Dan J]

Terry,
Thanks a bunch. So, 1/10 is the key phrase and avoid the T-Maxx. I'll do some surfing tomorrow with this in mind. Thanks again.

dan

[VenomRS4]

Are there any graphite parts available for Nitro Stampedes? If so, where can I get them?

[BJoeHandley]

Hey Guys, Just got a N-Pede for nothing (literally, nothing :D ) and have decided to restify it, beef it up, and modify it so it looks like E-Pede (sorry about the pic, I need new pics of the truck.)

Heres what I've got in mind;

Ditch the whole stock suspension, with the exeption of shock towers, for the E-Pede suspension, RPM 5x11 bearing carriers, Big Bore Shocks, Trinity Maxx springs, Hardened steel outdrives, Traxxas aluminum wheel hexes, 0 degree rear arm mounts, Trinity hinge pin brace, Lundsford 3.5mm tierods/turnbuckles, maybe Revo ball ends (if they will use 3mm screws to mount to the chassis and knuckles), new bearings, T-Maxx servos, new servo saver (Kimbrough), and maybe HPI Nitro MT2 wheels and tires.

Since it doesn't have an engine; get a 2.5R, MIP T-Maxx race clutch (higher stall speed), try to find a better pipe that the stock Rustler/4-Tec pipe or the Traxxas Blue pipe (I'm not too sure if it has enough flow for that engine,..wonder if a Revo pipe will work?), RRP E-Maxx slipper clutch assembly, and T-Maxx gas tank moved as far forward on the chassis as possible. That's all I can think of at the moment....

[DT-10]

Hello I curently had a Thunder Tiger DT-10, and still do but I'm looking for something much better. I was looking on traxxas and I seen this truck and I liked it, but I dont know what kind I should get I want this 1 or the Nitro Traxxas Sport Maxx and I dont know what one is a better buy... Does the PEDE have alot of hop-ups like aluminum a-arms and stuff like that? Well hope to get a reply on this cause I'm kinda thinking about it and I want your guys oppion on this cause you have the stampede thanks

Aaron

[thewarrenator]

anyone have a video of their nitro stampede bashin? im thinkin of gettin one but not sure if its worth it. i own a xxxt and i want to get into nitro. i have always heard not to go nitro because they're a pain to tune and maintain but thats the exact reason why i want to.
any videos or links to some would be greatly appreciated,
thanks

[tony093]

hey guys what website did u buy your mip stinger exhaust on. i cant find a website. thanks

[redlined_man]

I dont think they make them anymore. You could try ebay or something like that. If you want more power just upgrade to the 2.5R or 3.3.


Redlined Man

[Tamiya84]

Mine maybe gone, i would hate to see it go i really like the truck alot, i have over 400 into it and ive used it 3 times lol, i dont like getting it to dirty its a nice park truck i recommend the Steel Spur gear from MIP, i have it on my pede it makes a world of difference and its fully adjustable. You can make it a track truck or a stunt(wheelie) truck, The TRX 2.5 is a great motor to stick in the pede, I would recommend it to anyone who asks, The best part was i had to do no coustom work so when somehting breaks i can go to the LHS and Buy the parts :)

[M1220]

Hey guys, Can anybody tell me if the MIP cvd's for the nitro rustler will work on the pede? Thanks

[peow130]

Hi guys, i'm new to the traxxas stampede forums but not the RC10GT forums.
Anywho, i'm looking for a new engine that will last and be more powerful than my stock .15..
Mine kind of broke down on me and i'm looking for a new .18 or .15 with same or greater power.

[Dan H]

OS .18 Cvr

[peow130]

Will the O.S. .18 fit directly into the stampede?

[dEhaN20]

HI guys, sory to bother you with amateur stuff I realise you are all RC gurus.
I realy want to get into the hobby but don't know where to start.
Do you think a newbie like myself would be able to maintain and keep my truck running without any real rc skills ?
Thanx a lot

[abicus]

I just bought STAMPEDE two weeks ago. real fun car. But the teeth of the spur gear have been chewed away to glory. are there any suggestions ..something like a metal gear or something??