Double the roost and Maxxed out voltage!

[Floyd Negrete]

I am now installing two Novak Super Rooster reversibles (cause I have them) and running 10 / 24oo NI MH apiece which makes 20 cells to stock Titan motors.
If you have done something like this all tips will be appreciated , wish me luck.E- Maxxed out! (electric).:rolleyes:

[ATBwell]

RUN THE TRINTY D4 6T TRIPLE MOTOR. Then tell us what it does with 20 sanyo 3000's, high voltage. i wanna know how many backflips it does off the line.

[draggerman11]

Well, it wouldn't be doing any backflips--- thats for sure. Those motors have next to no torque, the complete oppipisite of what you would want in an E-Maxx. Try some 15x1's, those should get her movin at a good pace.

[old phart]

Floyd, maybe I'm missing something here, but it sounds like it will still be the same as stock.

2 SR's? With 10 cells to each SR? OK, that is 12V to each SR, and then to each Titan. Actually, slightly less than stock.

Somehow, I don't think that is what you meant, however.

If you are talking about pumping 20 cells to each SR, it will burn them out pronto. If you have thought of a way to put 10 cells to each SR, and then somehow transfer the 20 cells to each motor, well that will be something. It'll haul ass for a while, but the voltage will shorten the life of the motors drastically.

Please clarify what you meant. ;)

[Floyd Negrete]

Each Super rooster can run 10 cells so if I Y harness them together(parralel them) can run them , Tower Hobbies sells a kit with two Rooster reversibles and a Y harness and instructions for 145 to 155 $ ,but they only run 7 cell max and Super does 10 cell with no motor limit, I'll show you old phart it's very simple just need money time and room for batteries.
Till next time ,peaceout late........................:rolleyes:

[draggerman11]

0ld Phart, I think he was going to use regular 540 motors. BUT, he may as well use the stock esc, as it pumps out more volts. Maybe he should just get a brushless motor system.

[nitroboy2001]

Dragewrman11-
You are right, but the only advantage two super roosters will have agains the stock esc is that it will:

1. Have way more run time
2. The possibility of insane motors in there
3. Will run significantly cooler (the motors)

[draggerman11]

As I said, he should just run the stock system, it pumps out more volts.

Floyd, that y harness goes from the two escs to the reciever.

[Floyd Negrete]

Nitroboy has got it and I will have it real soon, now I did 7 cell 8.4 apiece 16.8volt total and it acted like lightning but even in second gear it went on it's back but I am on to something here something really fast imagine with a couple of 13 or 14 turns? and the stock are 550 cans whats this 540 stuff?I'll melt those to quick. What will it take to melt these Titans ? Next is 9.6 volts apiece 19.2 volts!, let the soldering begin.:rolleyes:

[I Am E/T.]

Running two super roosters at 7.2 is slower than14.4 all day long ,but c'mon fellas stock?, I put two Race Prep 13 doubles in a E-Maxx with two 10 cell 3000mah NI MH and oh man did it run the ***t out of my os.21 T-Maxx.
That's the real and my Megatech .16 T-Maxx can keep up on the track? , Thats the shocker!

p.s yes I had another name.:cool: :cool:

[I Am E/T.]

Well fellas it seems this is the ticket!
I'm running two Race Prep 10 turn doubles with two Super Roosters and I cant be touched! even my RS4 with a OS.15 cant keep up with it in terms of 0-30mph speed this thing rocks and boy does it grab attention!, it is so bizzar to see something this big move this fast and yes I get 10 good minutes of kick that .21 T-Maxx AZZ(I have three .21 converssions) you all should try this if you love speed and 4x4 go anywhere ego.
p.s. keep in mind I'm using two 10 cell 300mah NI MH's, and it smokes my M.16 from start to finish meaning it is good for at least 40mph!:D

[old phart]

Hey, are you Floyd?

Dude, I sent you 2 e-mails about meeting in Sylmar and you never replied. What's the deal? When and where does your group meet? :D

tkeliher@socal.rr.com

[I Am E/T.]

Yes we still meet in Sylmar.

[speedie105]

I have a question. If the Titan motors operate at 14 volts and say trinity speed gems operate at 7 volt. What will it do to the trinity speed gem if you run it at 14 volts??