XXXNT Sport RTR forum

[StAmPeDe MaN86]

whohas one? i got some q's about it so be prepared.
ok, here goes, is it as durabla as a nitro rustler?
how fast does it go?
what fuel do i use to race and bash(if i bash)?
will it break fast? i want to drive not fix
is it worth the $340?
LET ME KNOW!

[Nutter]

You shouldn't post another thread for a r/c with an existing thread.. post this in the XXX-NT Forum, there's a wealth of knowledge there and there's no need to separate the two.


-Nutter

[StAmPeDe MaN86]

i saw the xxxnt forum right after i posted this, sorry guys!

[chevyrocks]

hey guys i just got my sport and bought it little less than rolling chassis. and wanted to now where i can get the manual and graphite parts for it. if anyone has any stock parts that would be appreciated. i need the hole rear set up minus the battery box thanx alot email me.:D email me at littleman21stl@cs.com

[WHITESTER1]

Just a pet peeve......


We are posting "threads" in the "Nitro Offroad" FORUM. This THREAD happens to be titled "XXXNT sport forum" It is a thread, not forum... LOL

Okay, I feel much better now... Hahaha!

[rndw]

does any one have the specs on the mach.15 engine im intersted in the truck but am hesitent because of the engine any info would be helpful

[xxxnt_legend]

You should post this in the Nitro Fourm. Sorry, I can't be of any help.

[racer13]

the motor's Pretty good for me so far... just be easy on her first 10 or so tanks.. my bro ran his kinda hard.. and he's fly wheel spins freely without any hesitation..

[raderrustler]

I have been thru 7 tanks and ran it harder than breakin for the first time, no problems, great acceleration and definitely need to loosen up the slipper clutch. The low gearing makes it extremely quick and the front end seems a little lighter than the rc10 but thats with the slipper tight. The motor seems just fine to me no problems:D

[raderrustler]

I agree white, the xxx-nt and the sport version are two different vehicles sharing the same parts, similiar to the stampede and the rustler. Just more like twins. As for any parts just look at the losi xxx site and there is a wealth of info. hope it helps

[racer13]

yea.. i found out the fly wheel was just loose. Not broken, great truck.. i got 2 :D

[rndw]

im not looking for how your engines run im looking for the specs on the engine
bhp?
rpm?
etc...................

[xxx mike]

I'm not sure if the original poster is still looking here or not, but I have a sport version xxx-nt. It has been good to me so far. The stock .15 engine has about 1 gallon of 20% Trininity monster horsepower fuel through it. Using a radar gun, I did get to clock it after break in and the highest reading I got was 37mph, right along side a RC10GT with a OS CZ-Z .12. The stock.15 isn't the fastest engine on the planet, it's actually no faster then the CZ-Z, but it is by no means a POS. It idles great, and is very easy to work with and tune.

As for "will it break" If you crash it, yes ofcourse it will break! So far, through my 1 gal of fuel I have only had a couple of crashes, and only 1 broken part. I hit a parking block fairly hard one night driving under parking lot lighting, and cracked the mount points on the front right side swing arm. I bought new swing arms for 8 dollars and had it back out the next day.

Overall it's been a very reliable and easy to tune package.

The only things I've observed that I didn't like was that the optional 20 tooth clutch bell does not fit and the engine runs extremely hot and needs to be very rich to safely run if it's over 80 degrees outside.

[NovakXXXNT]

http://pic5.picturetrail.com/VOL83/535002/796709/9492238.jpg

http://pic5.picturetrail.com/VOL83/535002/796709/9492236.jpg


You can check out more pics at www.PictureTrail.com then in the search box type NovakTMaxx

check out my XXX-nt fourm at http://pub7.ezboard.com/bstadiumracers and i can answer all questions!

[BlackwoodKnives]

Hi Guys,

Great forum!!

I'm in the process of building an Adam Drake edition with my son. We purchased the kit and the radio but haven't yet decided on an engine. We are both new to Nitro and decided on the Drake edition for it's TOUGH parts and our learning curve behind the wheel!!
I would appreciate any recomendations as far as engines. Our goal is to first hone our driving skills THEN possibly race. I've been told that a pull start motor in this truck would be a sin, we already have a starter box given to us by a friend!!
Lastly, we've been offered a rear exhaust .12 motor at a good price, from what I've been told it may be a bit much for learning :( What is involved with adapting the exhaust?? Can we use the Drake exhaust??

Thanks


Neil

[FastEddy]

BlackwoodKnives


You would have to get a new header but the pipe will work.
I just built the same kit and used OS CV-R .12 Lots of power and the holds a tune real well.
There is an XXXNT thread that may be better for you.

Have fun.

[Figit090]

I'm saving for the xxx-nt sport and i can't wait to get one. Are .15 engines race legal? And are they stronger then .12?

[purplerides]

figit- no .15 aren't legal for racing , however most tracks will let RTR's run there original motor , as long as it's not a sactioned race event you shouldn't run into problems , at my track and most tracks i know of you can run your RTR motor and rebuild it or replace it with the same motor but you can't drop a race bred .15 motor in it , almost all of the .12's esp. the race breed high hp ones will outrun a .15 RTR motor.

btw there is a XXXNT forum on here that has 125 pages plus of info , not that espect you read 125 pages...LOL ,but you'll get a more timely response to any of your q's

[teamlosi 4 life]

for what i can say is that the nt rtr is a great buy! its a racer out of the box!

[yeeehaw]

I am so itchy to get mine my mom owes me 300.0$ for my saved up money plus my report card money. I have been saving for a year took up a job over the summer expecting to get my car as soon as I get back, I even bought the radio for it. I under stand the problems but I am not mad but very ticked off becouse I might have to wait another year.:mad: see ya Matt

[Crashbot2001]

Report Card Money???????? Oh man... Kids these days....

[yeeehaw]

whats wrong with report card money for a 13 year old???

[Crashbot2001]

Do you get paid to brush your teeth and wash your hair too? How about getting dressed or making your bed?

Lol.. Nothing personal.. I was just poking fun at you

[yeeehaw]

I wish i would get paid for all that. I would be rich!! LOL

[losixxxnt]

I read on another forum that the mach .15 produced .85 BHP but not sure about the rpm's.

[T/Losi]

Hi,
I am thinking about maybe getting one of these kits [xxx-nt sport rtr]. How durable is it like a know if you run into a wall it will break but jumping wise and racing wise. How reliable is the engine and is it easy to tune

Cheers

[Dingus]

Super cheap XXX-NT Drake Edition replacement parts or upgrades to the Sport XXX-NT

Follow the link...

http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=dmong2&include=0&since=-1&sort=3&rows=25

[MBX4RR]

I just orded my XXXNT. I had a NXT before. I plan on getting and nice racing engine like a RB Concepts as soon as i get more money. Im building a race track in back yard too. :D

[MBX4RR]

For the peolpe asking about the durabilty, it is very durable. I have been jumping it 20ft and landing on one wheel and flipping it about 5 times after that. I am usaully expecting it to break but it doesnt.

[Canucksk]

I just took my LOSI XXX-NT out for a bashing run to test my new 6061-T6 front skid plates. They are top notch and work great. Much better than the stock skid !

RCSKIDZ (http://www.rcstop.com/rcskidz)
http://www.rcstop.com/rcskidz/plateonlosi.gif

[AvidNitroBurner]

well i have had my xxnt rtr for about three months now and i use it for bashing only here is a tally of the broke parts list front a arms5 rear a arms 3 2 rear shock towers and 1 batery box....i paid 200.00 for the rc tricks alum kit and love it......in my opinion the xxxnt is the smoothest handling st i have ever drove and it duribility is great for a rtr i am just very hard on my truckshope this helps someone and as allways happy nitro burning

[Strike 4]

Hope this pic works

[Strike 4]

another

[Lord Hobbes]

if you ask me, the stock engine in this thing sucks. couldnt get it to run past 1/2 a tank. after a quart of break in fuel and box of band-aids (for the blisters from the pull start) i called up the local neighborhood dumba$$ and bought a 3 year old fantom fr12 from him for 20 bucks. never had a problem since, expt for that one time i drove it into a puddle that i couldnt see and it was 4 inches deep.....

the car is very strong, can withstand anything u put at it, if you stress a part of the car rather than a single part, like an A arm or kickplate, your fine. otherwise, make sure theres a hobbyshop nearby :-D

[nitro15]

what is better to get for handling a .12 or .15

[MBX4RR]

get a good .12 like a Picco, RB, Novarossi. I have a Picco :) and it is sick.

[MBX4RR]

if you ask me, the stock engine in this thing sucks. couldnt get it to run past 1/2 a tank. after a quart of break in fuel and box of band-aids (for the blisters from the pull start) i called up the local neighborhood dumba$$ and bought a 3 year old fantom fr12 from him for 20 bucks. never had a problem since, expt for that one time i drove it into a puddle that i couldnt see and it was 4 inches deep.....

the car is very strong, can withstand anything u put at it, if you stress a part of the car rather than a single part, like an A arm or kickplate, your fine. otherwise, make sure theres a hobbyshop nearby :-D

Maybe you didnt tune it or break it in right, because mine worked great idled for as long as i ever needed and wasnt to bad in the speed department either.

[ashxxxnt]

has any one ran the dynamite .12 thats like under 100 bucks ill be racing but im just strating back up. and will be low on money. with runing 1/8 and also 1/10 elec truck. it takes a lot of money to get back in this hobby.