[Gerryy]

We just got this puppy in for review! Watch for it in an upcoming issue of MAN!

Features

Newly designed Dial-N-Key jog dial with joy stick button allows cursor movement in four directions for very user friendly navigating through menus and programming PCM G3 2048 resolution is "backwards compatible" with 1024 PCM, and FM/PPM
7 different wing types, 3 tail types, and 8 heli swash types are
already programmed into the 12FG
6 types of no tail wing (winglet) in each airplane and glider
Supports eight flight conditions (seven plus the default)
Stores memory for up to thirty models
1882 model memory available with optional 1GB SD Card
available separately,
Six factory-set Variable Dual Rate (VDR) curves can be assigned to
any function in any flight condition configuration
Variable Dual Rates (VDR) and Expo can be combined so they are
automatically activated when a function is activated, no program
mixing required
Dual Internal Processors allow one processor to be devoted to flying
functions while the other processor focuses on non-flight
functions such as input and communications
7.2V 1700mAh NiMH transmitter battery
R5114DPS Receiver;
Operates in either Mode A (standard Mode) or if flying a model
that generates a lot of RF interference or if flying in an area
where interference may occur Mode B (new Mode) may be selected
By using state-of-the-art Ball Grid Array (BGA) layered PC board
technology, this 14-channel synthesized receiver is the world's
smallest. All pilots will appreciate how easy its
WFSS (Wireless Frequency Setting System) makes changing
frequencies at busy airfields. It can be done right from the
transmitter without changing crystals.

Servo Grouping; Multiple servos controlling a single function can be set up through the transmitter and then plugged into differently adjustable receiver channels (even non-consecutively) without needing a separate servo synchronizer for mixing. Each servo's EPA can be adjusted individually from the transmitter-no separate servo synchronizer requires for mixing Quad-Bearing Gimbals for smoothest motion and response, stick tension and detent are adjustable 255x163 LCD screen with adjustable contrast Front mounted slider switches for easier access Seven color LED indicator

INCLUDES:
12FGA Synthesized Transmitter (not available separately)
72MHz Module
R5114DPS 72MHz Receiver
7.2V 1700mAh NiMH Transmitter Battery
Battery Charger
NiCd 1500mAh 4.8V Receiver Battery
Heavy Duty Switch Harness
Woven Orange Neck Strap
Instruction Manual

REQUIRES: Charging batteries before use
Servos of modeler's choice, suggested servos for use with the 12FGA
include the Futaba S9154 Digital High Speed Servo (FUTM0214) and
the Futaba S9255 Hi-Torque Heli Digital Servo (FUTM0225)